PLA+
The product is modified based on PLA material, and is easy to print, in addition, it improves the toughness and layer adherence.
Diameter Size: 1.75mm
Net Weight: 1kg/spool
Introduction:
Description
PLA+ is an environment-friendly material, which is easy to print and has a smooth surface. Good strength, rigidity, toughness balance, strong impact resistance, very suitable for functional parts printing; Approved by FDA, safer to use; Can be used for the conceptual model, rapid prototyping.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | PLA+ |
| Density(g/cm3) | 1.23 |
| Heat Distortion Temp(℃,0.45MPa) | 53 |
| Melt Flow Index(g/10min) | 5（190℃/2.16kg） |
| Tensile Strength(MPa) | 63 |
| Elongation at Break(%) | 20 |
| Flexural Strength(MPa) | 74 |
| Flexural Modulus(MPa) | 1973 |
| IZOD Impact Strength(kJ/㎡) | 9 2/10 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 210 – 230℃ Recommended temperature：215℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
Reviews
There are no reviews yet.