Soldering Iron 200W

Characteristics:

1. Contains glass fibers for higher impact strength.
2. Dual insulation construction protects hands from heat.
3. Provide with special dual construction heating element.
4. with fast heating, not easy to damp leakage, light, and beautiful.
5. Made of stainless steel for high resistance to rust and oxidation caused by heat.

Specifications:

• Soldering iron length: 33cm
• Power cord length: 120cm
• Sweat head width: 2.2cm
• Power:  200W
• Voltage: 220V-50Hz
• Temperature:  over  300°C

Usage:

1. Welding can be carried out 2 minutes after the electricity.
2. A safe and reliable grounding device is needed for soldering iron at work.
3. Useable at welding temperature; unplug the power if not used for a long time to extend the life of the heater and iron head.
4. Tin should be kept on an iron head in use and after use.

Attention:

1. Strong acidic flux is avoided for welding.
2. In use, iron can not be knocked and black oxide in the head can not be cleared by file.
3. Thermo elements and iron heads are strictly prohibited from being demolished or replaced when iron is in electricity.
4. It’s normal for heating elements to have a slight fever with smoke after the first electricity, they’ll disappear after 10 minutes.
5. The configured iron base and welding materials should be grounded reliably to avoid sanger.
6. Power wires and heating core should be replaced by full-time staff when they don’t work well.