Ublox NEO-6MV2 GPS Module

Ublox NEO-6MV2 GPS Module:

The Ublox NEO-6MV2 GPS Module allows you to add GPS support in a microcontroller system (eg Arduino ), and the built-in NEO-6M system gives great possibilities and ensures high precision of measurement. The module has a built-in cell supporting RTC clock settings.

The NEO-6M is a GPS (Global Positioning System) module and is used for navigation. The module simply checks its location on earth and provides output data which is longitude and latitude of its position. It is from a family of stand-alone GPS receivers featuring the high performance u-blox 6 positioning engine. These flexible and cost effective receivers offer numerous connectivity options in a miniature (16 x 12.2 x 2.4 mm) package. The compact architecture, power and memory options make NEO-6 modules ideal for battery operated mobile devices with very strict cost and space constraints. Its Innovative design gives NEO-6M excellent navigation performance even in the most challenging environments.

Features:

• Based on u-Blox NEO-6M GPS module with onboard backup battery and built-in EEPROM.
• Comes with an external U.FL ceramic antenna for better reception.
• It is compatible with various flight controller boards designed to work with a GPS module, APM2.0, and APM2.5 just to name a few.
• This module has a built-in voltage regulator and it is sometimes referred to as GY-GPS6MV2.
• Navigate down to –162 dBm and –148 dBm cold start.
• EEPROM to save configuration settings.
• Faster acquisition with AssistNow Autonomous.
• Configurable power management.
• Hybrid GPS/SBAS engine (WAAS, EGNOS, MSAS).
• Standalone GPS receiver.
• Anti-jamming technology.
• Compatible with u-Blox GPS Solution for Android.
• A-GPS: AssistNow Online and AssistNow Offline services OMA SUPL compliant.
• Under 1 second time-to-first-fix for hot and aided starts.
• Time-To-First-fix:  For Cold Start 32s, For Warm Start 23s, For Hot Start <1s.
• UART Interface at the output pins (Can use SPI, I2C, and USB by soldering pins to the chip core).

Specifications:

• GPS system: U-blox NEO-6M
• Receiver Type:
  • 50 Channels
  • GPS L1 frequency, C/A Code
  • SBAS: WAAS, EGNOS, MSAS
• Horizontal position accuracy:
  • GPS: 2.5 m
  • SBAS: 2.0 m
  • SBAS + PPP < 1 m (2D, R50)
  • SBAS + PPP < 2 m (3D, R50)
• Maximum speed: 500 m/s
• Acceleration: <4g
• Tracking sensitivity: -161 dBm
• Sensitivity of acquisition: -148 dBm
• Average time of “cold start”: 27 seconds
• The average “warm start” time is 27 s
• Hot start time: 1 sec
• Average recovery time: 0.1s
• Working temperature range: -40 ° C to + 80 ° C
• Power supply range: from +3.5 V to +5.5 V
• Bus voltage UART: 3.3 V
• UART: 9600 baud by default, but is configurable from 4800 to 115200 baud
• 5Hz max update rate
• The soldering points allow the antenna to be mounted on the PCB
• Built-in RTC backup battery
• Built-in u.FL connector for antenna
• Supply voltage: 3.6V
• Maximum DC current at any output: 10mA
• Module dimensions (without antenna): 36 x 26 x 4 mm
• Dimensions of the antenna: 28 x 28 x 8 mm

Pin Configuration:

Applications :

• GPS Navigation Systems.
• Aircraft Positioning.

Package Included: