28BYJ-48 Stepper Motor 5V with ULN2003 Driver Module
28BYJ-48 unipolar stepper motor 5V with ULN2003 driver board, ideal for precise motion control in microcontroller projects.
90.00 EGP
Buy Now28BYJ-48 Stepper Motor 5V with ULN2003 Driver Module
The Stepper Motor 5V with ULN2003 is a compact motion device combined with a matched driver module for easy and reliable integration in microcontroller and robotics projects. Typically based on the popular 28BYJ-48 unipolar stepper motor, this kit includes a dedicated ULN2003 Darlington transistor array driver board that amplifies control signals to safely drive the motor coils. Operating at 5 VDC, it delivers finely stepped motion with a geared reduction for increased torque and positional precision. This combination simplifies interfacing with Arduino, Raspberry Pi, ESP32, and similar development platforms, allowing for accurate control of rotation, speed, and direction in automation, robotics, and DIY applications.
Features
- Includes 5V unipolar stepper motor with geared output for enhanced torque.
- ULN2003 driver board with four Darlington transistor channels for coil driving.
- Four LED indicators on driver board show coil activation status.
- Standard 5-wire motor interface for plug-and-play connection.
- Easy microcontroller integration (Arduino, Raspberry Pi, ESP series).
- Compact and lightweight module suitable for prototyping and education.
Specifications
| Motor Type | Unipolar stepper motor. |
| Connection Type | 5 Wire Connection (to the motor controller). |
| Voltage | 5-12V DC. |
| Frequency | 100 Hz. |
| Step Mode | Half-step mode recommended (8 step control signal sequence). |
| Step Angle | Half-step mode: 8 step control signal sequence (recommended) 5.625 degrees per step / 64 steps per one revolution of the internal motor shaft.
Full Step mode: 4 step control signal sequence 11.25 degrees per step / 32 steps per one revolution of the internal motor shaft. |
| Gear Ratio | Manufacturer specifies 64:1. |
| Wiring to The ULN2003 Controller | A (Blue), B (Pink), C (Yellow), D (Orange), E (Red, Mid-Point). |
| Weight | 44g. |
| Package Included | 1 x 28BYJ-48 Stepper Motor 5V. |
Applications
- Stepper motor control in Arduino and microcontroller projects.
- Small robotics and automated mechanisms.
- CNC and positioning systems at hobby scale.
- Teaching and prototyping motion control.
- DIY electronics and embedded system projects.
Package Contents
- 1x 28BYJ-48 stepper motor 5V.
- 1x ULN2003 driver module.
| Weight | 50 g |
|---|---|
| Dimensions | 100 × 100 × 30 mm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.