Home
Shop
Wishlist0

2MP-OV2640 Camera Module

385.00 EGP

Purchase this product now and earn 39 Points!
Buy Now
Availability: In Stock
SKU:7167742936158
Features:
1. OV2640 image sensor has 200W pixels (1632 x1232 pixels), its small size, low work voltage, monolithic UXGA camera and image processor provide all the functionality.
2. Can be output by SCCB bus control, the whole frame, sampling, take the way such as window resolution of 10 sampling data.The product UXGA image to a maximum of 15 frames per second.Users can complete control of image quality, data format and transmission mode.
3. All the process of image processing functions, including gamma curve, white balance, saturation and chroma can be through the SCCB programming interface.OmmiVision image sensor application of sensor technology, unique to reduce or eliminate the optical or electronic defect such as fixed pattern noise, tail, float away, etc., improve the quality of the image, get clear and stable color images.

Low high sensitivity, low voltage is suitable for embedded application
Low standard SCCB interface, compatible with the I2C interface
RawRGB, RGB (GRB4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output format
Support UXGA, an SXGA, VGA, QVGA, QQVGA, CIF, QCIF and until 40 x the size of the different sizes
Low support automatic exposure control, automatic gain control, automatic white balance, automatic eliminate the light stripe, automatic black level calibration. Including the color saturation, color image quality control
Phase, gamma, sharpness ANTI_BLOOM Settings, etc.
Low support image scaling, translation and window Settings
Support for image compression, can output JPEG image data
Low with embedded microcontroller processor
Integrated active vibration crystal 12 m, without external clock
“Integration”, working in a power supply to 3.3 V

Specifications:

  • Sensor size: 1/4 inch
  • Pixel: 1600 x 1200 (200W)
  • The output format: RGB565/JPEG/YUV/YCbCr, etc
  • Control interface: SCCB
  • Working voltage: 3.3 V
  • Module size: 28 x 28mm

Pinouts:

Number Name Instruction
1 GND Ground wire
2 VCC 3.3V power input
3 SCL SCCB clock line (IN)
4 VSYNC Frame synchronization signal
5 SDA SCCB data line (IN/OUT)
6 HREE Line reference signal (OUT)
7,9-14,16 D0-D7 Data line (OUT)
8 RESET Reset signal (low level)IN
15 PLCK Pixel clock (OUT)
17 PWDN Power-down mode (high level) OUT
18 NC Not used

Download Arduino library.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Back to Top
Product has been added to your cart