Rechargeable 601718 LIPO Battery Cell 3.7V 150mAh Wire Solder
The Rechargeable 601718 LiPo Battery Cell 3.7V 150mAh with wire solder is a slim and lightweight power source designed for compact electronic devices. Built with lithium polymer technology, it delivers stable voltage, high energy density, and reliable performance. With a 150mAh capacity, it provides sufficient runtime for low-power applications while maintaining an ultra-thin profile. The pre-soldered wires make it easy to integrate into circuits, ensuring quick and secure connections. Ideal for wearables, miniature electronics, wireless gadgets, and DIY projects, this battery combines efficiency, safety, and convenience in a small form factor.
Features
- Ultra-slim and lightweight design for compact applications.
- 3.7V nominal voltage with stable and reliable output.
- 150mAh capacity suitable for low-power electronic devices.
- Pre-soldered wires for easy installation and secure connections.
- Rechargeable with long cycle life for repeated use.
- High energy density compared to standard batteries.
- Low self-discharge for extended standby performance.
- Suitable for wearables, wireless gadgets, sensors, and DIY projects.
Specifications
| Specification | Details |
| Model | 601718 |
| Chemistry | Lithium Polymer |
| Recharging Availability | Rechargeable |
| Nominal Voltage | 3.7V |
| Rated Capacity | 150mAh |
| Full Charge Voltage | 4.2V |
| Cut-off Voltage | 3.0V |
| Power (Wh) | 0.56Wh |
| Dimensions | Thickness: 6mm Width: 17mm Length: 18mm |
| Weight | 4 gram |
| Connector Type | Wire leads for soldering |
| Typical Discharge Current | 0.2C (30mA) |
| Maximum Discharge Current | Up to 1C (150mA) |
| Standard Charging Current | 0.2C (30mA) |
| Cycle Life | ≥ 300 cycles (under standard charging/discharging) |
| Internal Resistance | 200mΩ (at full charge) |
| Operating Temperature | Charging: 0°C to +45°C Discharging: -10°C to +60°C |
| Storage Temperature | -20°C to +60°C |
Dimensions
⚠️ Precautions
- Do not store Li-Po batteries in extreme temperatures below 0C or above 50C.
- Always disconnect Batteries when not in use and store batteries in a non-conductive and fireproof container.
- Never expose Batteries to extreme temperatures or direct sunlight.
- Never charge a battery that is still warm after usage, and never use a battery that is still warm from charging.
Applications
- Wearable devices such as fitness trackers and smart bands.
- Wireless sensors and IoT modules.
- Compact medical devices and health monitors.
- Bluetooth headsets, mini speakers, and audio accessories.
- Portable handheld gadgets and controllers.
- DIY electronics and robotics projects.
- Backup power for small embedded systems.
- Remote-control mini transmitters and receivers.
Package Contents
- 1 x Rechargeable 601718 LIPO Battery Cell 3.7V 150mAh Wire Solder
Reviews
There are no reviews yet.