Rechargeable 603040 LIPO Battery Cell 3.7V 1000mAh Wire Solder
Features:
- Low self-discharge rate
- This battery are PCM Protected
- Small Li-Po Battery are rechargeable battery
- Good charging and discharging characteristics
- Lightweight, low mold opening cost, and high safety
- No memory effect and a slow loss of charge when not in use
- It offers high capacity and hence can be used to hold more power
Specifications:
- Battery Type: LIPO
- Model: 603040
- Chemistry: Lithium Polymer
- Recharging Availability: Rechargeable
- Nominal Voltage: 3.7V
- Rated Capacity: 1000mAH
- Full Charge Voltage: 4.2V
- Cut-off Voltage: 3.0V
- Power (Wh): 3.7Wh
- Dimensions:
- Thickness: 6.0mm
- Width: 30mm
- Length: 40mm
- Connector Type: Wire leads for soldering
- Typical Discharge Current: ≤ 0.5C (250mA)
- Maximum Discharge Current: Up to 1C (500mA)
- Standard Charging Current: 0.2C (100mA)
- Cycle Life: ≥ 300 cycles (under standard charging/discharging)
- Internal Resistance: ≤ 200 mΩ (at full charge)
- Operating Temperature:
- Charging: 0°C to +45°C
- Discharging: -10°C to +60°C
- Storage Temperature: -20°C to +60°C
Precautions:
- Never expose Batteries to extreme temperatures or direct sunlight
- Do not store Li-Po batteries in extreme temperatures below 0°C or above 50°C
- Always disconnect Batteries when not in use and store batteries in a non-conductive and fireproof container
- Never charge a battery that is still warm after usage, and never use a battery that is still warm from charging
Applications:
- Electronics Gadgets.
- IoT Applications.
- Portable devices.
- Wireless devices.
- Electronic Toys.
Package Contents:
- 1 X Rechargeable 603040 LIPO Battery Cell 3.7V 1000mAh Wire Solder


Reviews
There are no reviews yet.