Carbon Resistor 75Ω 0.5W Through Hole
Carbon Resistor through-hole, 75 Ω nominal, 0.5 W rated power; epoxy coated, axial leads, standard ±5% tolerance for general electronics.
0.25 EGP
Buy NowCarbon Resistor 75Ω 0.5W Through Hole
The Carbon Resistor 75 Ω 0.5 W through-hole is a carbon-film fixed resistor in the CR series designed for general-purpose electronic use. In the CR family it corresponds to the 1/2 W power class and follows the standard cylindrical, axial-lead through-hole form factor. The component is constructed on a ceramic core with a deposited carbon film that establishes its 75-ohm resistance value, then coated with epoxy for insulation and mechanical protection.
As a 0.5 W carbon-film resistor it delivers stable resistance at room temperature and is intended for low-to-moderate power dissipation applications. Temperature coefficient and tolerance follow the CR series specifications (tolerances ±5% standard, ±2% option), and the part is tested for load-life, humidity and pulse overload performance according to the CR series test methods (JIS C 5202). It shows predictable drift characteristics within the specified limits after stress tests.
Because of its compact size (bulk dimensions for the 1/2 W CR type) and robust epoxy coating, this 75 Ω 0.5 W resistor is useful where a reliable, low-cost passive resistor is required. It is solderable per the supplier’s solderability and solder-heat recommendations and offers long service life (use life ≥10,000 hours under rated conditions).
Features:
- Carbon-film fixed resistor, through-hole (CR series).
- Rated power class: 0.5 W (1/2 W).
- Standard tolerance: ±5% (±2% available).
- Ceramic core with high-stability carbon film.
- Epoxy resin coating for insulation and solvent resistance.
- Tinned copper leads (suitable for reliable soldering).
- Withstands standard load-life, humidity and pulse overload tests (per JIS C 5202).
Specifications:
| Specification: | Details: |
|---|---|
| Product family: | CR series – Carbon film fixed resistor |
| Resistance: | 75 Ω (nominal) |
| Rated power: | 0.5 W (1/2 W) |
| Tolerance: | ±5% standard (±2% option) |
| Temperature coefficient: | See CR series TCR table (10 Ω–1 MΩ: ±350 ppm ) |
| Operating temperature range: | −55 °C to +155 °C |
| Bulk dimensions (typical for 1/2W): | L ≈ 9.0 mm Ø ≈ 3.5 mm lead Ø ≈ 0.50 mm |
| Insulation / withstanding voltage: | Insulation resistance >1000 MΩ see withstanding voltage table per power class |
| Life / reliability: | Use life ≥10,000 h under rated conditions failure rate ≤10 PPM |
| Solderability / solder heat: | Solderability ≥95% coverage solder heat per table (230 °C dwell tests) |
Pinout Diagram:
Footprint Diagram:
Applications:
- General-purpose electronic circuits.
- Signal conditioning and bias networks.
- Current limiting in small-signal circuits.
- Pull-up / pull-down resistor in logic circuits.
- Repair, prototyping and educational kits.
Package Contents:
- 1x Carbon Resistor 75Ω 0.5W Through Hole
Datasheet
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.