CM280S Lead-Free Solder Soldering Pot 2000W 220V

Description Solder dipping tank, tin heating tank CM-280S

Tin heating tank CM-280S is a line of heating equipment with high capacity, used for heating, cooking, calcining, and dipping tin, and is often used for industrial parks and export processing zones. The product has very good quality, standard temperature, low error, high durability, and an eye-catching design.

Technical specifications Solder dipping tank, tin heating  tank  CM280S

• Tin heating tank CM280S
• Temperature ranges from 0 to 400 degrees Celsius
• The operating environment temperature ranges from 0 to 50 degrees Celsius
• Humidity of working environment < 90%
• Input voltage:  AC220 – 230V
• Capacity: 2000W
• Internal dimensions : ɸ280 x 200 x 45mm
• External dimensions : 536L x 285W x 120H

Note: Australian Plug Power Cord

Performance characteristics:

1, Cm series lead-free soldering furnace configuration of high-power heating core, can quickly disperse lead-free tin, from room temperature to reach 450 ℃, in only 25 minutes (depending on the size of the tin furnace will be slight differences).
2, using a micro intelligent control chip, dual digital display, intuitive and clear, high thermal sensitivity, hot quickly, temperature compensation fast.
3, lead solder pot is made of imported titanium materials, high temperature, corrosion resistance, wear resistance, and durability.
4, the tin oven sets the data directly with the touch button input, simple and accurate.
5, the data set by the machine can be long-term, not by turning off, power outages.

Precaution:

Tin melting furnace work must be placed in a stable, heat work table, to prevent high-temperature tin from splashing the tin. Already melted tin and oven tin including temperature is higher, to be careful work, be careful of burns.
When the tin oven is used for the first time, do not empty the tin pot to cause tin oxidation too quickly. Please add small pieces of tin or partial tin to ensure the heat transfer in time.
Lead-free solder melting furnace must be located separately from the furnace tin (including any lead
Do not use melting furnaces near flammable and flammable and explosive gases.
When moving the melting furnace, the power must be disconnected before the furnace is cooled to room temperature.
This product is a high-temperature equipment, do not forget to turn off the power when not in use, to avoid accidents.
In order to ensure the safety and life of the furnace tin, the furnace tin does not work for more than 12 hours.
In order for personal safety and for the machine can work properly, remember not to be free to burn, use to be connected with the “ground” power supply, taking note that “ground” can not be connected to the “zero line”.
The company melted tin furnaces with titanium Tai Japan imported refined materials, tin pots burning at high temperatures for a time after the surface turned golden brown or blue, which is normal, but also the material properties of this metal.
The quality assurance of this product is that all parts are under original brand accessories, otherwise the quality will not be guaranteed.
Customers use, boiled acid, alkali, slag, and other strong corrosive materials, tin pot, and heating body will not be guaranteed.
The tin oven is not waterproof, pay attention to humidity in use.

Troubleshooting:

1, the boot is not activated, check the fuse is open, or the plug is connected.
2, boot at the same temperature display, does not heat up, said the heating element is disconnected.
3, after booting if the left display shows the temperature is high, the right display shows HIA or light and has flashing, it shows that the thermal is open, or temperature control table failure.

Packing list:

Our products are complete sets of equipment packing lists as follows:

• 1x tin furnace machine
• 1x the instruction for use
• 1x tin slag scraper