Cytron 13Amp DC Motor Driver – GROVE Compatible

275.00EGP

MD13S has great improvement in current protection which MD10C does not have. With new circuit and design, MD13S is able to output current to 30A max. And the continuous current is at 13A (in room temperature of 25 degreeC).

Not to forget it is GROVE compatible, so get yourself a Grove shield. Oh, did I mention? MD13S is smaller than MD10C 🙂

Description

Brush motor is the most used motor world wide because of the ease of operation. Just supply two terminals of brush motor with DC voltage, it will start rotating! Yet, you need a good motor driver to control the speed and direction from a microcontroller. MD10C is a great motor driver and now it is already in Revision 3. Anyway, we would like to introduce MD13S where the S stands for SMD (Surface Mount Device)

MD13S has great improvement in current protection which MD10C does not have. With new circuit and design, MD13S is able to output current to 30A max. And the continuous current is at 13A (in room temperature of 25 degreeC).

Not to forget it is GROVE compatible, so get yourself a Grove shield. Oh, did I mention? MD13S is smaller than MD10C 🙂

Features:
  • Bi-directional control for 1 brushed DC motor.
  • Support motor voltage ranges from  6V to 30V
  • Maximum current up to 13A continuous and 30A peak (10 seconds).
  • GROVE compatible
  • 3.3V and 5V logic level input.
  • Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.
  • Fully NMOS H-Bridge for better efficiency and no heat sink is required.
  • Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency).
  • Support both locked-antiphase and sign-magnitude PWM operation, NOT RC (Radio Control) PWM.
  • SMD compatible
 Dimension: 61mm x 33mm
 Documents:
Attachment:
Date Added Size Action
Fritzing file 24/07/2017 N/A Download
User’s Manual 24/07/2017 N/A Download
Eagle CAD Library 24/07/2017 N/A Download

Specification:

Operating Condition
Compatible input 3.3 and 5V
Motor Channel 2
Operating Voltage (VDC) 6 to 30
Peak Current (A) 30 (10 seconds)
Continuous Current (A) 13
Operating Modes
Arduino Shield No- can be used with Wire connection
PWM (Lock-Antiphase and Sign-Magnitude) Yes
UART No
Analog No
RC Servo Signal No
Special Protection
Polarity Protection NO
Appearance
LEDs Indicator Yes
Test/Manual Button Yes
Cooling Fan No
Other Features
Extra Socket Groove Compatible
others No heat sink is required

 

Reviews

There are no reviews yet.

Be the first to review “Cytron 13Amp DC Motor Driver – GROVE Compatible”

Your email address will not be published. Required fields are marked *

You may also like…