-
-
-
-
Rechargeable Li-ion Battery 18650 3.7V 3000mAh - with JST Cable 1S-1P+BMS (SAMSUNG Cell)
180.00 EGP180.00 EGP× -
Digital Gyroscope 3-Axis Sensor Module GY-50
L3G4200D 3-Axis Gyroscope Angular Rate Sensor Module. This is a breakout board for the L3G4200D low-power three-axis angular rate sensor. The L3G4200D has a full scale of ±250/±500/±2000 dps and is capable of measuring rates with a user-selectable bandwidth. These work great in gaming and Useful virtual reality input devices, GPS navigation systems and robotics.
110.00 EGP
Buy NowDescription:
GY-50 L3G4200D 3-Axis Digital Gyro Angular Velocity Sensor Module for Arduino
The L3G4200D is a 3 axis gyroscope, providing you with very high resolution (16 bit) measurements at up to 2000 degrees per second (dps).
The gyroscope measures how much the device is rotating around all three axis, the range is user selectable and so can be adjusted to suit your application. The gyro is marketed as ultra-stable, which basically means its measurements vary much less over time and temperature compared to other gyroscopes you may have used in the past.
The triple axis gyro outputs data over either I2C or SPI. If you choose to use the device in I2C, there are handy soldering jumpers available on the board to choose the address.
The device also features a 32 count first in first out (FIFO) buffer, allowing you to request the data in batches, rather than having to constantly query the device. This frees up processor cycles for more calculations, whilst still maintaining a high bandwidth.
Specification:
- Chip: L3G4200D
- Power Supply: 3-5V
- Communication Mode: IIC / SPI communications protocol
- Measuring Range: 250/500/2000 dps
- 32 count FIFO buffer
- Communication Interface: I2C (up to 400 kHz) or SPI (10 MHz; 4 & 3 wire)
- Operating Temperature: -40 to +185 °F (-40 to +85 °C)
- Color: Blue
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.