ESC (Speed Controller for Brushless Motor) 30A with Motor Connectors

Standard BLDC 30 amp ESC Electronic Speed Controller with Connector is specifically made for quadcopters and multi-rotors. It provides faster and better motor speed control giving better flight performance compared to other available ESCs.

STANDARD 30 amp ESC Electronic Speed Controller can drive motors that consume up to 30A current. It works on 2-3S LiPo batteries. The onboard BEC provides regulated 5V(2A max draw) to power the flight controller and other onboard modules. This is useful to control our brushless motors with a 2-3S LiPo (make sure the motor doesn’t draw more than 30A).

This particular ESC is recommended with an A2212 brushless motor (1000kv, 1400kv, 2200kv)

ESC CONNECTORS:

• Battery Side – Bare wires.
• Motor Side – Female 3.5mm Gold Connector.

CONNECTIONS:

• Power: Red – 7.4V to 16.8V
  Black – GND
• Servo: Yellow – Throttle Input
  Red – 5V, 2Amp Out
  Brown – GND
• BLDC Motor: 3 Blue Wires – BLDC ESC Connections

Features

• Safety arming feature: Regardless of the throttle stick position, the motor will not rotate after the battery is connected.
• Throttle calibration function: Throttle transmission range can be calibrated to be compatible with different.
• User Programming.
• Multiple program modes supported: transmitter stick, LED program card. Very easy to program ESC at home or in aviation.
• Compatible with LiPo NiMH battery.
• The timing can be changed to be suitable for different brushless motors.
• Full protection: low voltage cut-off protection / over-temperature protection/throttle signal loss protection.

Specifications:-

• MODEL: STANDARD 30A BLDC ESC ELECTRONIC SPEED CONTROLLER
• Color: Black
• CURRENT (A): 30A
• BEC: 3A
• Li-Poly: 2-3
• Number of batteries: 2-4Lipo (4Lipo does not allow BEC output)
• Power input: 5.6V – 16.8V (2-3 cells Li-Poly, OR 5-10 cells Ni-MH Ni-MH / Ni-Cd battery)
• BEC: 5V 2AMP.
• Ni-Mh/Ni-CD: 4-10 Ni-Mh
• Constant current: 30A (Max 40A less than 10 seconds)
• Break On/Off
• Auto Low BATTERY Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell lipo
• Size: 48mm x 26mm x 9mm

APPLICATION: Multirotors, Rc Airplanes, etc.