ESP32-H2 (Thread/zigbee/Matter) for CrowPanel
The ESP32-H2 (Thread/zigbee/Matter) for CrowPanel is a cutting-edge wireless module designed to enhance the capabilities of CrowPanel displays. Built around the powerful ESP32-H2 chip from Espressif Systems, this module brings advanced connectivity options to your projects, including support for Thread, Zigbee, and Matter protocols. Whether you’re developing smart home devices, industrial automation systems, or IoT sensor networks, this module provides the reliability, efficiency, and security you need.
Features:
- Supports Thread, Zigbee, and Matter protocols for seamless smart home integration.
- Bluetooth 5.3 Low Energy with mesh and long-range capabilities.
- IEEE 802.15.4 radio for robust mesh networking.
- 32-bit RISC-V single-core processor up to 96 MHz.
- 320 KB SRAM, 128 KB ROM, 4 KB LP memory.
- In-package flash: 2 MB or 4 MB.
- 19 programmable GPIOs with support for ADC, SPI, UART, I2C, I2S, etc.
- Advanced security features: secure boot, flash encryption, cryptographic accelerators.
- Ultra-low power consumption: deep-sleep mode at 7 μA.
- Easy integration with CrowPanel Advance displays.
Specifications:
|
Chip Model |
ESP32-H2FH4 |
|
|
FLASH |
4MB Quad SPI |
|
|
SRAM |
320KB |
|
|
ROM |
128KB |
|
|
LP memory |
4KB |
|
|
Ambient temperature |
-40℃~105℃ |
|
|
Voltage |
3.3V |
|
|
Bluetooth Low Energy Radio Specifications |
||
|
Working channel center frequency range |
2402~2480MHz |
|
|
RF transmission power range |
-24.0~20.0dBm |
|
Pin Configurations:
|
Pin |
Pin Direction |
Note |
|
U1RXD |
Input |
Serial port 0 receiving pin |
|
U1TXD |
Output |
Serial port 0 receiving pin |
|
GPIO12 |
Input/Output |
GPIO |
|
GPIO13 |
Input/Output |
GPIO |
|
GPIO14 |
Input/Output |
GPIO |
|
3V3 |
|
Power supply |
|
GND |
|
Ground wire, connected to the power reference ground |
|
GPIO1 |
Input/Output |
GPIO |
|
GPIO0 |
Input/Output |
GPIO |
|
GPIO2 |
Input/Output |
GPIO |
|
GPIO22 |
Input/Output |
GPIO |
|
GPIO10 |
Input/Output |
GPIO |
|
GPIO11 |
Input/Output |
GPIO |
|
BOOT |
Press and then tap the RST key to enter the burning mode |
|
|
RST |
Press it to re-run the program and also to burn the program. |
|
Applications:
- Smart home devices.
- Industrial automation.
- IoT sensor networks.
- Mesh networking applications.
- Low-power wireless communication.
- Matter-compliant devices.
Package Include:
- 1x ESP32-H2 wireless module.
- 2x male pin header 7pins.



Reviews
There are no reviews yet.