- You cannot add "DRV8825 Stepper Motor Driver" to the cart because the product is out of stock.
- You cannot add "DRV8825 Stepper Motor Driver" to the cart because the product is out of stock.
Sold out
ESUN PETG 3D Filament 1.75mm 1Kg Roll for 3D Printer
PETS
PETG is a high-cost performance material with water resistance, chemical resistance, and high toughness. It’s tougher than ABS; The printed product has a translucent and smooth surface. It’s easy to print as PLA without a temperature chamber.
Diameter Size: 1.75mm
Net Weight：1kg/spool
Introduction:
-
Description
PETG is a high-cost performance material with water resistance, chemical resistance, and high toughness. It’s tougher than ABS; The printed product has a translucent and smooth surface. It’s easy to print as PLA without a temperature chamber.
- * Application
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | PETG |
| Density(g/cm3) | 1.27 |
| Heat Distortion Temp(℃,0.45MPa) | 64 |
| Melt Flow Index(g/10min) | 20（250℃/2.16kg) |
| Tensile Strength(MPa) | 52.2 |
| Elongation at Break(%) | 83 |
| Flexural Strength(MPa) | 58.1 |
| Flexural Modulus(MPa) | 1073 |
| IZOD Impact Strength(kJ/㎡) | 4.7 |
| Durability | 8/10 |
| Printability | 9/10 |
|
Recommended printing parameters |
|
| Extruder Temperature(℃) | 230 – 250℃ Recommended temperature：240℃ |
| Bed temperature(℃) | 75 – 90°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | Masking paper, PVP solid glue |
| Color | White, Solid Red |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.