The 5 Inch Touch Screen HDMI Interface TFT LCD Module is a good solution for those who are seeking for a bigger resolution display.
This TFT LCD Display for Raspberry Pi has 5″ size which features 800×480 pixel resolution. Getting the Pi onto the display board is easy enough!!! make use of stand-off screws included in this pack to put the Raspberry Pi on the display board. But while you do this please ensure that the HDMI ports of both the Display and the Pi would line up with each other so that you will take advantage of the HDMI connector that we are providing in this product pack.
This 5 Inch Touch Screen HDMI Interface TFT LCD Module is a mini panel-mountable HDMI monitor. Small and simple, yet you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to an electronic product.
It features efficient operation by equipping Backlight Power switch with which you can control the backlight whether to be on and off to save power. It has 13×2 Pin Socket from where one can get 5V Power from raspberry Pi to LCD and at the same time, transfer touch signal back to Raspberry Pi. It also features extended interface which is the replica of 13×2 Pin Socket.
Although the 800×480 common HDMI display is made for Raspberry Pi, you can use it on other compatible boards too.
Features:
- 800×480 high resolution
- Directly-pluggable into any revision of Raspberry Pi (only except the first generation Pi model B which requires an HDMI cable)
- The driver provided (works with custom Raspbian directly)
- HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
- Backlight control to lower power consumption
- High-quality immersion gold surface plating
INTERFACE:
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1, 17 | 3.3V | Power positive (3.3V power input) |
| 2, 4 | 5V | Power positive (5V power input) |
| 3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 | NC | NC |
| 6, 9, 14, 20, 25 | GND | Ground |
| 19 | TP_SI | SPI data input of Touch Panel |
| 21 | TP_SO | SPI data output of Touch Panel |
| 22 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
| 23 | TP_SCK | SPI clock of Touch Panel |
| 26 | TP_CS | Touch Panel chip selection, low active |
Specifications:
- 5 inch TFT Resistive touch screen display, 800×480 Resolution
- HDMI input
- USB touch and power, 5V@1A
- Touch: 4-wire resistive touch
- Refresh rate：60HZ
- LCD Size ：121.11mm x 77.93mm
Package Includes :
1 x 5 Inch Touch Screen HDMI Interface Display Module.
1 x Stylus Touch Pen.
4 x stand-off screws.
1 x HDMI Connector.
1 x Driver disc.
Note:
if you want to use this LCD as a general monitor, the mini USB port is used for the power supply
you just connect HDMI to any device(with LCD power by mini port)
Reviews
There are no reviews yet.