Home
Shop
Wishlist0

Lithium Battery Charger Protection Module (BMS) 3S 25A 12V

85.00 EGP

Availability: Out of stock
SKU:300000008841

Li-ion battery 3S 25A 12V BMS 18650 PCM 3S 18650 Lipo lithium charger Battery BMS protection circuit board with balance

product characteristics

  • 100% brand new and high quality 18650 lithium battery charging module
  • Lithium battery Li-ion 3S 25A 12V BMS 18650 PCM:
  1. high-precision voltage detection circuit;
  2. terminal of the charger using the high voltage device;
  3. Built-in three-stage overcurrent detection circuit (overcurrent 1, overcurrent 2 or load short circuit);
  4. The MOS transistor can control the charge and discharge of the battery;
  5. low reserve current consumption.
  6. With balance

aeProduct.getSubject ()

  • Lithium battery Li-ion 3S 25A 12V BMS 18650 PCM Parameter:
  1. Load Overload: 4.25-4.35v ± 0.05v
  2. About discharge voltage: 2.3-3.0v ± 0.05v
  3. Maximum working current: 25A
  4. Maximum Maximum Current: 35-40A
  5. Working temperature: -40 — + 50
  6. Storage temperature: -40- +80
  7. Small current: 50uA
  8. Lifecycle: more than 30000 hours
  9. Resistance: Less than 100mΩ
  10. Short Cut: Protectable, the load can repair
  11. Size: 56 * 45 * 4.0mmaeProduct.getSubject ()
  • 3S 25A 12V BMS 18650 Li-ion PCM lithium battery Application:
  1. Vacuum Cleaner
  2. Massager battery pack
  3. LED back-up power supply
  4. Electronics Li-ion 12V
  5. led solar power, ect
  • Lithium battery Li-ion 3S 25A 12V BMS 18650 PCM Note:
  1. The protection plate can not be used for lithium-iron phosphate battery, hernia lamp, hand drill battery, can not be used for electric fishing machine battery, electric bicycle battery, infant car battery, motor 775 ( 4A), 1W Fish-eye LED Light.
  2. 3A current discharge products above, the battery discharge rate to 3C or more.
  3. Battery expansion 1C, 2000 capacity equals 2AH * 1 = 2A operating current.
  4. Enlarge battery 3C, 2000 capacity equal to 2AH * 3 = Operating current 6A.
  5. In use, the battery will warm up is the battery does not apply, this situation may not be of prolonged use, the battery will soon be damaged.
  6. OV (B-), 3.7V (B1), 7.4V (B2), 11.1V (B +), do not short circuit intentionally!
  7. Then you need to load the first line, you will have output.
  8. When connecting three groups of batteries, make sure that the voltage of each battery pack, if not the same, fills each battery separately and
  9. then use in series. Test discharge, the voltage drop decreases the battery faster than the group is a weak battery.
  10. Do not mix good and poor batteries together! 3 sets of battery capacity / resistance closer to the better! (2 good battery +1 a weak battery use effect = 3 weak battery use effect)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Back to Top
Product has been added to your cart