Description
The LM35 integrated circuit is a temperature sensor with reduced dimensions, it has a 3-pin TO-92 package. Its output is analog and linear with a slope of 10mV /ºC. It allows you to measure temperature from −55°C to 150°C, it will help you carry out applications such as thermometers, thermostats, monitoring systems and more.
The LM35DZ is easy to use, it does not require additional circuitry to be used. It is powered directly from a 5V supply and delivers an analog output between 0V to 1.5V. This analog voltage can be read by the ADC of a microcontroller or development board such as Arduino, ESP32, Raspberry Pi Pico, PICs and more.
It is a very precise and easy to use electronic component, as it provides an analog signal directly proportional to the temperature in degrees Celsius. The LM35 is a passive temperature sensor, meaning it does not need any external power supply to operate. Instead, it uses the energy from the output signal to power itself, making it very efficient in terms of power consumption. The LM35 is very sensitive and can measure temperatures with an accuracy of ±0.5 degrees Celsius. It is very useful in applications where accurate temperature measurement is required, such as temperature control systems, security systems and measurement equipment.
LM35 Sensor Pinout Configuration
| Pin Number | Pin Name | Description |
| 1 | Vcc | Input voltage is +5V for typical applications |
| 2 | Analog Out | There will be increase in 10mV for raise of every 1°C. Can range from -1V(-55°C) to 6V(150°C) |
| 3 | Ground | Connected to ground of circuit |
Features
- Calibrated directly in ˚ Celsius (Centigrade)
- Linear + 10.0 mV/˚C scale factor
- 0.5˚C accuracy guaranteeable (at +25˚C)
- Rated for full −55˚ to +150˚C range
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 µA current drain
- Low self-heating, 0.08˚C in still air
- Nonlinearity only ±1/4˚C typical
- Low impedance output, 0.1 Ω for 1 mA load
Specifications
- Circuit type: Analog temperature sensor
- Output Type: Voltage
- Minimum supply voltage: 4 V
- Maximum supply voltage: 30 V
- Output current: 10 mA
- Sensitivity accuracy range: ± 0.5°C
- Minimum detection temperature: -55°C
- Maximum detection temperature: 150 ° C
- Minimum operating temperature: -0°C
- Maximum operating temperature: 100°C
- Sensor case type: TO-92
- Number of pins: 3
Reviews
There are no reviews yet.