Metal Momentary Switch On/Off Waterproof with Power LED 12mm (Blue)

These chrome-plated metal buttons are rugged and waterproof and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2″ thick and you can fit these in place, there’s even a rubber gasket to keep any water out of the enclosure. On the front of the button is a flat metal actuator. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the RED LED ring (+ and -). Connect 12V to the LED to have it light up nicely, there’s a built in resistor!

• Drill hole diameter: 12mm
• Switch rating: 2A / 250VDC
• Switch contacts: 1 NO, 1 NC
• Material: Chrome plated brass
• Grade: IP40/IP67
• Contact resistance: < 50 mOhm
• Insulation resistance: > 1000 Mohm
• Temperature: -20 C to +55 C
• Mechanical life: > 500,000
• Electrical life: > 50,000
• Panel thickness: 1-13mm
• Operating pressure: 1.5 – 2.5 N
• Operating stroke: 2mm
• Lamp rated voltage: 12V