Home
Shop
Wishlist0

Microphone Sound Detection Sensor 4 Pin

45.00 EGP

Purchase this product now and earn 5 Points!
Buy Now
Availability: In Stock
SKU:300000009321

Product Description: sound sensor – Microphone

The sound detector with a small electret microphone, a voltage supply range from 3.3 V to 5 V. The module is easy to use, has two outputs: an analog – to measure the intensity of the digital signal and changing state when exceeding a certain level.

Sound Detection Sensor Module Pin Configuration

Pin Name

Description

VCC

The Vcc pin powers the module, typically with +5V

GND

Power Supply Ground

DO

Digital Output Pin. Directly connected to digital pin of Microcontroller

AO

Analog Output Pin. Directly connected to an analog pin of Microcontroller

Brief about Sound Detection Sensor Module

This Sound Detection Sensor Module consists of a Microphone, resistors, capacitor, potentiometer, comparator LM393 IC, Power, and status LED in an integrated circuit.

LM393 IC

LM393 Comparator IC is used as a voltage comparator in this Sound Detection Sensor Module. Pin 2 of LM393 is connected to Preset (10KΩ Pot) while pin 3 is connected to Microphone. The comparator IC will compare the threshold voltage set using the preset (pin2) and the Microphone pin (pin3).

Microphone

The microphone in the Sound sensor module detects the sound. This sound is fed into the LM393 IC.

Preset (Trimmer pot)

Using the onboard preset, you can adjust the threshold (sensitivity) of the digital output.

Using sound sensor 

The sensor has a 4-pin connector with analog and digital output A0 D0 to be attached to the pin of the microcontroller, e.g.an Arduino.

Przykład podłączenia czujnika obrotu z Arduino

The product is compatible with Arduino

A sample program for Arduino.

Sound Detection Sensor Module Pin Configuration

Pin Name

Description

VCC

The Vcc pin powers the module, typically with +5V

GND

Power Supply Ground

DO

Digital Output Pin. Directly connected to digital pin of Microcontroller

AO

Analog Output Pin. Directly connected to an analog pin of Microcontroller

How to Use Sound Detection Sensor Module

Sound Detection Sensor Module consists of four pins i.e. VCC, GND, DO, AO. Digital out pin is connected to the output pin of LM393 comparator IC while the Analog pin is connected to Microphone. The internal Circuit diagram of the Sound Detection Sensor Module is given below.

Sound Detection Sensor Module Internal Circuit Diagram

Using Sound Detection Sensor Module with a microcontroller is very easy. Connect the Analog/Digital Output pin of the module to the Analog/Digital pin of Microcontroller. Connect VCC and GND pins to 5V and GND pins of Microcontroller. When the sound level exceeds the setpoint, an LED on the module is illuminated and the output is set low.

Specification of sound sensor

  • Supply voltage: from 3.3 V to 5 V
  • LM393 comparator with threshold preset
  • Output: analog signal and digital
  • Connector: 4-pin
  • Microphone: electret
  • Mounting hole: 3 mm
  • Frequency range: 50 Hz to 20 kHz
  • Sensitivity; from 48 dB to 66 dB
  • Operating temperature: -40 °C to 85 °C
  • Module dimensions: 35 x 15  mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Back to Top
Product has been added to your cart