This Infrared IR LED Light is usually used with Raspberry Pi camera. It allows adding night vision function to RPi camera and achive better vision.
- 3W high-power 850 infrared LED
- Onboard photoresistor, the ambient light detector
- Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
- When ambient light is lower than threshold value, the infrared LED is on, vice versa
- Small size and Lightweight module.
- Easy to use.
Specifications
Input Voltage | DC 3V-5V |
Current | 500mA-2A |
Infrared Power | 3W |
Night Vision Distance | 3-6m |
IR Wavelength | 850 nm |
Lens Range | Suitable for lens with 3.6mm focal length |
How to use
- Connect the Infrared LED Board to the camera PCB by screws
- The screw holes are used for both attachment and power supply
- Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically
- When ambient light is lower than threshold value, the infrared LED is on, vice versa
Please Note That:
- Limited by the Raspberry Pi power supply, the 3W high-power infrared LED might cause the Pi to increase heating, heat sinks are suggested.
- Ideal imaging distance is within 3m.
- When the distance goes up to 6m, the night vision camera can just capture blurry outlines.
Packing list:
- 1 x 3W Infrared LED for RPi NoIR Camera Module
- 1 x Screws and nuts set
Reviews
There are no reviews yet.