PCB Etching Solution 125mL

PCB Etching Solution 125mL

The PCB Etching Solution 125mL is a ferric chloride-based solution formulated for rapid and effective copper removal from printed circuit boards. Designed for both hobbyists and professionals, this ready-to-use etchant ensures clean and uniform etching results within minutes. Its non-toxic and user-safe composition makes it suitable for use in educational, prototyping, and artistic environments.

Features

• Fast and uniform copper etching performance.
• Ready-to-use ferric chloride solution.
• Non-toxic and safe for general handling.
• Etches up to 400cm² of copper in about 5 minutes at room temperature.
• Ideal for laboratory, workshop, and home use.

Specifications

Usage Steps

1. Prepare a Suitable Plastic Container for PCB Size.
2. Put your PCB in the Container (The Copper Area is Up and it Should Be Quite Shiny and Oxide Free).
3. Pour a little Amount of the Solution until the PCB is Fully Covered.
4. Wait a few minutes (5 Min).
5. Rinse with water After Etching.

Notice

• Etching is expected within (5) Minutes at room temperature.
• If the Etching Solution is Warm, the Etching will be Fast, to warm the solution, Place the Bottle in warm water at a temperature of 35 to 40 Celsius for a short period, by following the safety precautions, Don’t put the solution on direct heat.

Safety Precautions

• Wearing Plastic Gloves is Recommended When Using.
• Perform The Process in a Well-Ventilated Area.
• Don’t Breathe Reaction Gas.
• Use Enough Water When Eyes or Wounds Are Touched.
• Keep the Bottle Tightly Closed After Using and Keep Away from Children.

Applications

• Manufacturing and prototyping of printed circuit boards.
• Educational laboratory use in electronics projects.
• Artistic and decorative copper etching.
• Repair and modification of PCBs.

Appearance

The Solution is a Very Light-Azure Liquid, Packaged in a Transparent Plastic Bottle with a capacity of 125mL.

Package Contents

• 1x PCB Etching Solution 125mL.