Pixhawk PX4 2.4.8 32 bit ARM Flight Controller Kit + Holybro Power Module PM07-V2.4

Pixhawk PX4 2.4.8 32 bit ARM Flight Controller Kit + Holybro Power Module PM07-V2.4

The Holybro Pixhawk PX4 2.4.8 32-bit ARM Flight Controller Kit, bundled with the advanced PM07-V2.4 Power Module, represents the pinnacle of open-source autopilot technology for professional-grade unmanned aerial vehicles (UAVs). This all-inclusive kit provides developers, researchers, and serious hobbyists with every essential component required to construct, configure, and control a highly reliable and precise drone platform. The heart of the system, the Pixhawk PX4 2.4.8, is built around a powerful 32-bit ARM Cortex-M4 core processor with a floating-point unit, ensuring rapid and efficient processing of complex flight algorithms and sensor data. It is further enhanced by a Cortex-M0 co-processor for dedicated IO management, guaranteeing robust real-time performance even under demanding conditions. This flight controller is engineered for resilience, featuring a protective shell that safeguards the internal electronics from physical damage and environmental contaminants. The included Holybro PM07-V2.4 power module offers advanced power distribution and highly accurate battery voltage and current monitoring, which is critical for flight safety and performance telemetry. This complete ecosystem supports the full PX4 open-source software stack, enabling unparalleled customization and access to a global community of developers. Whether for aerial photography, precision agriculture, surveying, or advanced academic research, this kit delivers the performance, reliability, and feature set demanded by professional UAV applications.

Features:

• Pixhawk PX4 2.4.8 Flight Controller:
  • 32-bit ARM Cortex-M4 processor for high-performance flight control.
  • Supports PX4 and ArduPilot firmware for flexible autopilot options.
  • Equipped with multiple I/O ports for sensors, GPS, and peripherals.
  • Includes a protective shell to safeguard against impacts and damage.
• Holybro PM07-V2.4 Power Module:
  • Delivers 5.2V clean power to the flight controller with redundant power ports for safety.
  • Current and voltage measurement through analog signal, with 6-pin JST-GH cable for connectivity.
  • Provides ESC power and signal distribution for up to 8 ESCs.
  • Equipped with a 220µF capacitor for stable power delivery and preventing power spikes.
• NEO-M8N GPS Module:
  • High-precision GPS module with HMC5883L compass for accurate positioning and orientation.
  • Supports multiple GNSS systems like GPS, GLONASS, and BeiDou, providing robust signal reception.
• 3DR X6 RS232 Telemetry System
  • 433MHz air/ground modules for long-range wireless communication.
  • Up to 500mW transmit power for extended range up to 3km in open conditions.
  • SMA antennas included for strong signal reception and stable communication.
  • Includes USB cables for easy connection to a ground station.
  •  Includes Molex connectors
• PPM Encoder:
  • Converts PWM signals to PPM for compatibility with the Pixhawk controller, allowing precise control signal input.
• I2C Splitter Expansion Board:
  • Allows for the connection of multiple I2C devices, expanding the capability of your flight controller with additional sensors and modules.
• Pixhawk RGB LED & USB Extension Module:
  • Provides real-time LED status feedback from the flight controller through an RGB LED system.
  • The USB extension allows easy configuration and monitoring of the system through your ground station.
• OLED Display Module:
  • Displays critical flight information and system status directly on the OLED screen, making it easy to monitor the system’s health and performance.
• Safety Arming Switch:
  • Ensures safe arming of the motors by requiring the pilot to arm the drone with a physical switch, reducing the risk of accidents.
• Piezo Buzzer:
  • Emits audible alerts for critical system statuses, such as low battery or lost GPS signal, providing real-time warnings to the pilot.
• Pixhawk Vibration Dampening Mount:
  • Minimizes vibration from motors and propellers, ensuring stable sensor data and smooth flight control.
• 4GB MicroSD Card:
  • Includes a 4GB microSD card with adapter, allowing for the storage of logs, telemetry data, and flight records

Specifications:

Configuration:

Applications:

• UAV and drone development for research and personal projects.
• Real-time autonomous flight applications.
• Long-range telemetry communication for remote control and data logging.
• High-precision positioning for aerial mapping, surveying, and navigation tasks.

Package Include:

• 1x Pixhawk PX4 2.4.8 32-bit ARM Flight Controller with protective shell.
• 1x Holybro PM07-V2.4 Power Module with XT60 connector and 220µF capacitor.
• 1x APM/Pixhawk Power Module v1.0.
• 1x u-blox NEO-M8N High-Precision GPS Module with compass.
• 2x 3DR X4 RS232 Telemetry Radio Set (433MHz Air & Ground Modules, Antennas, Cables).
• 1x PWM to PPM Signal Encoder Converter Module.
• 1x I2C Splitter Expansion Board.
• 1x Pixhawk RGB LED & USB Extension Module with 8-wire harness.
• 1x OLED Display Module with connectors.
• 1x Safety Arming Switch Module.
• 1x Piezo Buzzer with mounting clips.
• 1x Pixhawk Vibration Dampening Mount with blue rubber isolators.
• 1x 4GB microSD Card.
• 1x gps holder

Documents: