Description
The device supports the control of fluid flow using a computer or microcontroller, including Raspberry Pi or Arduino using the amplifier or relay. The device is powered with voltage of 12 V. The diameter of the threaded inputs for water is 1/2 ”. The minimum value of the pressure is 0.2 bar (20 kPa).
Specification
- Supply voltage: 12 V
- Current consumption: approx. 320 mA
- Closed in the rest position
- Thread: 1/2 “: 20 mm
- Inner diameter: 13 mm
- Time of:
- opening: < 0.15 sec
- closing: < 0.3 sec
- Pressure range: 0.0 to 0.05 MPa
- Fluid temperature: 0 to 100 °C
Reviews
There are no reviews yet.