QUICK 900M-T-C Soldering Iron Tips
The QUICK 900M-T-C tip is a chisel-type soldering iron tip, with a flat, broad face truncated at a bevel, suitable for tasks that need more contact area than a needle or point tip. The body is metallic, often plated to resist oxidation, and fits into the standard heater block of the 900M-series irons. Its flat edge is cleanly ground, giving sharp transitions between the face, the bevel, and the sides. The finish is relatively smooth; with use it develops a patina of flux or solder, but initial machining or plating is uniform.
When heated, the QUICK 900M-T-C transfers heat across that flat face well, making solder flow effectively across joints that are elongated or require dragging. The chisel shape allows one to “drag” solder or bridge small sections more easily. The tip’s mass across the flat side helps with thermal stability: once it reaches temperature, it can better maintain heat under load compared to very fine points. The edges of the face are well defined, allowing precise scraping of solder bridges, or dry-joint corrections when needed. The bevel helps reduce overspill onto adjacent pads.
Over time, the flat face may show wear minor flattening or rounding of edges, oxidation or thermal discoloration but given its mass and plating, this happens less quickly than with smaller tips. Cleaning and tinning keep the contact face functional. The joint between tip and heater remains solid if properly inserted. The quick chisel is clearly meant for versatility: not just precision point work, but also soldering connectors, dragging solder, or making ground or power joints where more solder volume is needed on the face. Visually, it looks like a tip built for everyday, heavier-use soldering work rather than just fine micro-tasks.
Features:
- Chisel (flat/beveled) tip face for broader contact and dragging solder.
- Good heat retention thanks to the face and body geometry.
- Able to handle both delicate tasks and heavier joints due to its shape.
- Edge cleanly ground to allow precise control of solder spread.
- Compatible with QUICK / 900M-series irons (same tip base fitting).
Specifications:
| Specification | Value (as known or typical) |
|---|---|
| Tip Model / Part Number: | QUICK 900M-T-C |
| Tip Shape: | Bevel tip (“C” series) |
| Outer Diameter: | 6.5 mm (standard for many 900M-T tips) |
| Inner Diameter: | 4 mm (standard fitting) |
| Temperature Range: | ~ 200-480 °C (typical for QUICK 900M-T series tips) |
| Compatibility: | 900M-series irons / 936/936A / other clones using the same tip interface |
Applications:
- General purpose soldering with broader contact.
- Drag soldering / solder bridges repair.
- Work on connectors, ground / power traces.
Package Contents:
- 1x QUICK 900M-T-C Soldering Iron Tips
Reviews
There are no reviews yet.