New
Rechargeable 602018 LIPO Battery Cell 3.7V 170mAh Wire Solder
The 602018 Rechargeable LiPo Battery is a compact power source for small electronic devices, wearable gadgets, portable projects, and low-power microcontroller circuits.
55.00 EGP
Buy NowRechargeable 602018 LIPO Battery Cell 3.7V 170mAh Wire Solder
The 602018 is a rechargeable lithium-polymer (LiPo) battery cell designed to provide lightweight, compact energy storage for portable electronic applications. Its slim, pouch-style construction makes it suitable for projects where space and weight are important. The battery features a nominal voltage of 3.7V and a capacity of 170mAh, making it useful for powering small circuits and electronic devices.
This battery comes with soldered wires for convenient connection to compatible circuits and charging systems. It can be used in DIY electronics, miniature devices, and battery-powered prototypes. For safe operation, use a LiPo-compatible charging circuit configured for a single-cell battery, and ensure the charging voltage, current, and battery polarity are correct. Avoid puncturing, crushing, short-circuiting, or overcharging the cell.
Features:
- Rechargeable lithium-polymer battery technology.
- Lightweight pouch-cell construction.
- Compact form factor for space-constrained designs.
- Pre-attached wires for convenient electrical connection.
- Suitable for portable and battery-powered electronics.
- Compatible with single-cell LiPo charging and protection circuits.
Specifications:
| No. | Item | General Parameter | Remark |
|---|---|---|---|
| 1 | Rated Capacity | Typical: 180mAh Minimum: 170mAh |
Standard discharge(0.2C 5A) after Standard charge |
| 2 | Nominal Voltage | 3.7V | Mean Operation Voltage |
| 3 | Voltage at end of Discharge | 3.0V | Discharge Cut-off Voltage |
| 4 | Charging Voltage | 4.2±0.03V | |
| 5 | Internal Impedance | ≤150mΩ | Internal resistance measured at AC 1KHz after 50% charge
The measure must uses the new batteries that within one week after shipment and cycles no more than 5 times |
| 6 | Standard charge | Constant Current 0.2C5A Constant Voltage 4.2V 0.01 C5A cut-off |
Charge time : 2-3h |
| 7 | Standard discharge | Constant current 0.2 C5A end voltage 3.0V |
|
| 8 | Fast charge | Constant Current 0.5C5A Constant Voltage 4.2V 0.01 C5A cut-off |
Charge time : 1-2h |
| 9 | Fast discharge | Constant current 0.5C5A end voltage 3.0V |
|
| 10 | Maximum Continuous Charge Current | 1 C5A | |
| 11 | Maximum Continuous Discharge Current | 1C5A | |
| 12 | Operation Temperature Range | Charge: 0~45°C Discharge: -20~60°C |
60±25%R.H. Bare Cell |
| 13 | Storage Temperature Range | Less than 1 year: – 20~25°C less than 3 months: – 20~40°C |
60±25%R.H. at the shipment state |
- Never expose Batteries to extreme temperatures or direct sunlight.
- Do not store Li-Po batteries in extreme temperatures below 0°C or above 50°C.
- Always disconnect Batteries when not in use and store batteries in a non-conductive and fireproof container.
- Never charge a battery that is still warm after usage, and never use a battery that is still warm from charging.
Applications:
- Miniature electronic devices.
- Wearable electronics.
- Portable sensors and monitoring devices.
- Small Bluetooth and wireless gadgets.
- DIY Arduino and microcontroller projects.
- Miniature robotics.
- Portable LED devices.
- Battery-powered prototypes.
Packages Included:
- 1 × Rechargeable 602018 LIPO Battery Cell 3.7V 170mAh Wire Solder.
Documents:
Related products
