-
-
LM2577T-ADJ Boost Adjustable 3A 1.23V~60V 3.5V~40V TO-220-5 DC-DC Converters DIP IC
50.00 EGP50.00 EGP× -
SAB 8052B-P Single-Chip Microcontroller IC 8Bit PDIP-40
The Siemens SAB8052B-P is a high-performance 8-bit single-chip microcontroller based on the enhanced 8051 (MCS-51) architecture.
175.00 EGP
Buy NowSAB 8052B-P Single-Chip Microcontroller IC 8Bit PDIP-40
The SAB 8052B-P is a high-performance 8-bit single-chip microcontroller, a member of the SAB 8052/8032 family. It is fabricated in an advanced N-channel, silicon-gate Siemens MYMOS technology, and it comes in a 40-pin plastic dual-in-line package (P-DIP-40). This microcontroller is fully backward compatible with the SAB 8051/8031, providing a seamless upgrade path with enhanced features. It integrates an 8Kx8 ROM, 256×8 RAM, 32 I/O lines, three 16-bit timers, and a full-duplex serial channel. It is a powerful and cost-effective solution for a wide range of applications that require up to 64 Kbytes of program and data memory.
The Siemens SAB8052B-P is an 8-bit microcontroller from Siemens’ SAB8050 family, fully compatible with the MCS-51 instruction set. Designed for embedded control applications, this device combines on-board program memory (ROM), data memory (RAM), timer/counters, programmable I/O ports, and full serial I/O support in a single PDIP-40 IC. Exceptional instruction throughput and flexible peripherals make it suitable for industrial control, consumer electronics, communication interfaces, and intelligent peripherals. The architecture supports complex control algorithms while maintaining low power consumption and ease of programming.
Features:
- High-performance 8-bit CPU.
- 8 Kbytes of on-chip factory mask programmable ROM.
- 256 x 8-bit internal RAM.
- Four 8-bit I/O ports (32 I/O lines).
- Three 16-bit timer/event counters for timing and counting external events.
- Full-duplex serial UART channel for communication or I/O expansion.
- Expandable external memory up to 128 Kbytes.
- Boolean processor for bit-level logic operations.
- Six interrupt sources with two priority levels.
- Packages: P-DIP-40.
Specifications:
| Specification | Value |
|---|---|
| CPU: | 8-Bit Single-Chip Microcontroller |
| Family: | SAB 8052/8032 Family |
| Program Memory (ROM): | 8 Kbytes |
| Data RAM: | 256 Bytes |
| I/O Lines: | 32 (Four 8-bit ports) |
| Timers/Counters: | Three 16-bit |
| Serial Communication: | Full-duplex UART channel |
| Interrupts: | 6 vectors, 2 priority levels |
| Supply Voltage: | 4.5V to 5.5V |
| Mounting Style: | Through Hole |
Pinout:
| Pin No. | Name | Function |
|---|---|---|
| 1 | P1.0 | Port 1, bit 0 |
| 2 | P1.1 | Port 1, bit 1 |
| 3 | P1.2 | Port 1, bit 2 |
| 4 | P1.3 | Port 1, bit 3 |
| 5 | P1.4 | Port 1, bit 4 |
| 6 | P1.5 | Port 1, bit 5 |
| 7 | P1.6 | Port 1, bit 6 |
| 8 | P1.7 | Port 1, bit 7 |
| 9 | RST | Reset input |
| 10 | VCC | +5 V power |
| 11 | GND | Ground |
| 12 | XTAL1 | Crystal oscillator input |
| 13 | XTAL2 | Crystal oscillator output |
| 14–21 | P0.0–P0.7 | Port 0 |
| 22–29 | P2.0–P2.7 | Port 2 |
| 30 | PSEN | Program store enable |
| 31 | ALE | Address latch enable |
| 32 | EA | External access enable |
| 33–40 | P3.0–P3.7 | Port 3 (serial, interrupt, control) |
Applications:
- Industrial control systems.
- Instrumentation and measurement devices.
- Consumer electronics.
- Automotive control units.
- Telecommunication systems.
- Data acquisition systems.
- Robotics and automation.
Packages:
- 1x SAB 8052B-P Siemens 8Bit Single-Chip Microcontroller PDIP-40.
Documents:
Only logged in customers who have purchased this product may leave a review.



Reviews
There are no reviews yet.