Sold out
SIM7600E-H 4G HAT for Raspberry Pi, LTE Cat-4 4G/3G/2G, GNSS
The SIM7600E-H 4G HAT for Raspberry Pi is an advanced communication module that adds LTE Cat-4 connectivity and GNSS capabilities to Raspberry Pi applications. It supports multiple communication modes including 4G, 3G, and 2G, and integrates a GNSS module compatible with GPS, BeiDou, GLONASS, and Galileo systems. Designed for seamless integration with Raspberry Pi boards, it is ideal for IoT, mobile communication, and positioning projects. This HAT also includes features such as USB connectivity, onboard voltage regulation, and antenna interfaces for reliable and high-performance operation.
Features
- Compatible with Raspberry Pi series boards and Jetson Nano.
- Supports LTE Cat-4 with download speeds up to 150Mbps and upload speeds up to 50Mbps.
- Enables voice calls, SMS, MMS, email, and internet protocols such as TCP, UDP, HTTP, FTP.
- Supports GPS, BeiDou, GLONASS, and LBS base station positioning.
- Onboard USB interface for testing AT commands and accessing GPS data.
- Includes CP2102 USB to UART converter for serial debugging.
- Breakout UART control pins for connecting with host boards like Arduino or STM32.
- SIM card slot supporting 1.8V/3V SIM cards.
- TF card slot for data storage.
- Onboard audio jack and audio decoder for making telephone calls.
- LED indicators for monitoring operating status.
- Configurable operating voltage of 3.3V or 5V via jumper.
- Supports control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
- Includes development resources and manual with examples for Raspberry Pi, Arduino, and STM32.
Specifications
| Parameter | Value |
|---|---|
| Cellular Network | LTE Cat-4, 3G, 2G |
| LTE Bands | FDD: B1/B3/B5/B7/B8/B20 TDD: B38/B40/B41 |
| 3G Bands | UMTS/HSPA+: B1/B5/B8 |
| 2G Bands | GSM/GPRS/EDGE: 900/1800MHz |
| GNSS Systems | GPS, BeiDou, GLONASS |
| GNSS Receiver Type | 16-channel, C/A code |
| GNSS Sensitivity | Tracking: -159dBm (GPS), -158dBm (GLONASS) |
| GNSS Cold Start | <35s |
| GNSS Hot Start | <1s |
| GNSS Position Accuracy | <2.5m CEP |
| Operating Voltage | 3.3V/5V (configured via jumper) |
| Power Supply | 5V |
| Operating Temperature | -30°C to 80°C |
| Storage Temperature | -45°C to 90°C |
| Dimensions | 56.21mm × 65.15mm |
PINOUT
- SIM7600E-H
- CP2102 USB to UART Converter
- NAU8810 Audio Decoder
- TXS0108EPWR Voltage Translator – Translates 3.3V/5V to 1.8V
- MP2128DT Power Chip
- MP1482 Power Chip
- Raspberry Pi GPIO Header – For connecting with Raspberry Pi
- SIM7600 Control Interface – For connecting with host boards like Arduino/STM32
- SIM Card Slot – Supports 1.8V/3V SIM cards
- TF Card Slot – Allows file/SMS/etc. storage
- 3.5mm Earphone/Mic Jack
- USB Interface – For testing AT commands, getting GPS data, etc.
- USB to UART Interface – For serial debugging or logging into Raspberry Pi
- MAIN Antenna Connector
- AUX Antenna Connector
- GNSS Antenna Connector
- Power Switch
- Network Status Indicator
- Power Indicator
- Operating Voltage Selection Jumper:
- VCCIO – 3.3V: Set operating voltage to 3.3V
- VCCIO – 5V: Set operating voltage to 5V
- UART Selection Jumper:
- A: Access Raspberry Pi via USB to UART
- B: Control SIM7600 using Raspberry Pi
- C: Control SIM7600 via USB to UART
Applications
- IoT and M2M communication.
- Vehicle tracking and fleet management.
- Remote data acquisition and monitoring.
- Smart agriculture and environmental monitoring.
- Emergency communication systems.
- Industrial automation and control.
Compatible With Raspberry Pi Series Boards and Jetson Nano
Package Contents
- 1x SIM7600E-H 4G HAT Board.
- 1x LTE Antenna.
- 2x U.FL cables.
- 1x GPS External Antenna (B).
- 1x 35cm USB Type-A to Micro-USB Cables.
- 1x 120cm USB Type-A to Micro-USB Cables.
- 1x Raspberry Pi Screws Pack (2pcs).
Documents
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.