TL072 Operational Amplifier DIP-8
TL072 is a dual JFET‑input operational amplifier in an 8‑pin DIP, featuring low noise, high slew rate (13 V/µs), 3 MHz bandwidth, and ±5 – 15 V supply.
8.00 EGP
Buy NowTL072 Operational Amplifier DIP-8
The TL072 is a high‑speed, low‑noise JFET‑input dual operational amplifier designed for general-purpose analog signal processing. It features well-matched, high-voltage JFETs and bipolar transistors in a monolithic IC, offering high slew rates, low input bias/offset currents, and excellent noise performance.
Features
- Wide common-mode and differential input voltage range
- Very low input bias current (20–200 pA) and offset current
- Low input noise voltage, en = 15 nV/√Hz (typical)
- High slew rate: 16 V/µs (typical)
- Low total harmonic distortion: 0.01% (typical)
- Internal frequency compensation for stability
- Output short-circuit protection and latch-up free operation
- High input impedance due to JFET input stage
Specifications
| Parameter | Condition | Typical Value | Unit |
|---|---|---|---|
| Supply voltage range | VCC | 6 to 36 | V |
| Input offset voltage (Vio) | Rs = 50 Ω, Tamb = 25 °C | 3 | mV |
| Input bias current (Iib) | Tamb = 25 °C | 20–200 | pA |
| Slew rate (SR) | Unity gain, RL = 2 kΩ, CL = 100 pF | 16 | V/µs |
| Gain-bandwidth product (GBP) | RL = 2 kΩ, CL = 100 pF | 4 | MHz |
| Equivalent input noise (en) | RS = 100 Ω, F = 1 kHz | 15 | nV/√Hz |
| Input impedance (Ri) | – | 1×1012 | Ω |
| Total harmonic distortion (THD) | F = 1 kHz, RL = 2 kΩ, Av = 20 dB, Vo = 2 Vpp | 0.01 | % |
| Output voltage swing (±Vopp) | RL = 10 kΩ | ±13.5 | V |
Applications
- Audio : Ideal for microphone and line-level inputs due to low noise and high input impedance.
- Active filters & integrators: Stable frequency compensation and low distortion make it suitable for precise signal conditioning.
- Instrumentation amplifiers: High input impedance and low bias currents benefit sensitive measurement circuits.
- Voltage followers & buffers: Excellent phase margin and unity-gain stability for impedance matching.
- Oscillator circuits: Commonly used in designs such as quad 100 kHz oscillators and waveform generators.
DataSheet
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.