Home
Shop
Wishlist0

TLP250 Mosfet Driver Dip-8

55.00 EGP

Purchase this product now and earn 6 Points!
Buy Now
Availability: In Stock
SKU:4780927748846
Pin configuration isolated mosfet driver TLP250

Pin Configuration Description

Details are according to the datasheet.

PINS Details
1. NC .No Connection – Not used
2. Anode Anode terminal of LED diode
3. Cathode The cathode terminal of the LED
4. NC .No Connection – Not used
5. GND Connect with the Ground of the power supply
6. Vo Output terminal
7. Vo Output terminal
8. Vcc Connect with the Positive terminal of the power supply
pin configuration of isolated MOSFET driver TLP250
  • Pin number one and four are not connected to any point physically. Therefore they are not in use.
  • Pin number 8 is used to provide power supply to TLP250 and pin number 5 is a ground pin which provides a return path to the power supply ground. Maximum power supply voltage between 15-30 volt dc can be given to TLP250. But it also depends on the temperature of the environment in which you are using TLP250.
  • Pin numbers 2 and 3 are the anode and cathode points of input stage LED. It works like a normal light emitting diode. It has similar characteristics of forward voltage and input current. Maximum input current is in the range of 7-10mA and forward voltage drop is about 0.8 volt. TLP250 provides output from low to high with a minimum threshold current of 1.2mA and above.
  • Pin number six and seven is internally connected to each other. Output can be taken from either pin numbers 6 and 7. A totem pole configuration of two transistors is used in TLP250. In case of high input , output becomes high with output voltage equal to the supply voltage and in case of low input, the output becomes low with output voltage level equal to ground.
  • Mosfet driver TLP250 can be used up to 25khz frequency due to slow propagation delay.
Specifications
Attribute Value
Propagation Delay tpLH/tpHL 0.5us
Number of Channels 1
Supply Voltage 10V~35V
Operating Temperature -20℃~+85℃
Isolation Voltage(rms) 2500V
Common Mode Transient Immunity (CMTI) 5kV/us
Input Type DC
TLP250 Datasheet

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Back to Top
Product has been added to your cart