UNI-T UPO2204 Mixed-signal Oscilloscope 4-Channels 200MHZ
The UNI-T UPO2204 is a 4-channel, 200 MHz mixed-signal oscilloscope with advanced features for analyzing both analog and digital signals in various applications
52,500.00 EGP
Buy NowUNI-T UPO2204 Mixed-signal Oscilloscope 4-Channels 200MHZ
The UNI-T UPO2204 is a high-performance mixed-signal digital phosphor oscilloscope (MSO) featuring 4 analog channels with 200 MHz bandwidth and a real-time sampling rate of 2 GSa/s, plus 16 optional digital channels sampled at 1 GSa/s. Each channel boasts a deep 56 Mpts memory, enabling capture of long-duration waveforms without loss of detail. In Fast Acquire mode, the waveform capture rate reaches 1,000,000 wfms/s, making it easy to detect rare glitches or anomalies in complex signals .
The UPO2204 supports an extensive set of trigger modes, including edge, pulse width, video, runt, timeout, delay, duration, setup/hold, Nth-edge, and area triggers. It also offers serial-bus triggers and decoding for RS232/UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay, all performed in hardware on the full 56 Mpt record for near-instantaneous protocol analysis . Users can perform 36 automatic measurements (frequency, rise/fall time, duty cycle, area, RMS, phase, etc.) and apply advanced math functions—addition, subtraction, multiplication, division, logic operations, digital filtering, and a 4 Mpt FFT with waterfall and marker measurement.
The front panel integrates an 8-inch, 800×480 capacitive-touch TFT display with Ultra Phosphor technology providing up to 256-level grayscale and gesture support (zoom, drag, edit). Split-screen (Multi-Scopes) and XY modes simplify phase and comparative measurements. Connectivity includes USB Host/Device, LAN, EXT Trig, AUX Out (Trig Out/Pass-Fail), and VGA, with full SCPI command support and web-based remote control for automated test setups.
Additional features include a built-in dual-channel 50 MHz AWG, a Bode-plot loop-test function, and uninterrupted hardware recording of up to 120,000 frames. Compact and robust, the UPO2204 delivers professional-grade mixed-signal analysis in R&D, education, production test, and field-service environments.
Features:
- Analog channel bandwidth: 200MHz, 100MHz
- Real time sampling rate of analog channel 2GSa/s
- Real time sampling rate of digital channel 1GSa/s (only MSO)
- Number of analog channels: 2 or 4
- Storage depth of each channel: 56Mpts
- 16 digital channels, storage depth 56Mpts (only MSO)
- Waveform capture rate up to 1,000,000 wfms/s
- Built in 50MHz dual channel function / arbitrary waveform generator (only MSO-S). It supportsreal-time loading of oscilloscope screen data to AWG arbitrary wave output.
- Support Bode Plot loop test and analysis function
- Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames
- Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation)
- 4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection settingandmark measurement, etc.
- Auto measurement of 36 waveform parameters
- Supports parameter measurement while scanning
- Multi-Scopes supports multi-channel independent trigger and fluorescent display
- Multi-channel independent 7-bit hardware frequency counter
- DVM supports multi-channel independent AC / DC true RMS measurement
- Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout, duration,setup/hold, Nth edge and pattern trigger
- Area trigger function, which can be used to capture accidental signals and observe complex signals
- Protocol trigger and decoding function (optional)：RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay
- Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display
- 8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc.
- Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out Pass/Fail), AWG, VGA
- Support SCPI programmable instrument standard commands
- Support web access and control
Specifications:
| Feature | Specification |
|---|---|
| Model Number: | UPO2204 |
| Scope Type: | UPO |
| Bandwidth: | 200 MHz |
| Channels: | 4 Analog |
| Real-Time Sample Rate: | 2 GSa/s |
| Rise Time: | ≤1.8 ns |
| Memory Depth: | 56 Mpts |
| Waveform Capture Rate: | 1,000,000 wfms/s |
| Input Impedance (Analog): | (101 kΩ ±1%) |
| Input Impedance (Digital): | – |
| Waveform Generator: | No |
| Display: | 8-inch TFT LCD |
| Touchscreen: | Yes |
| Shipping Dimensions (L×W×H): | 19 in × 8 in × 12 in |
Applications:
- Communication Systems
- Semiconductor and Computer Electronics
- Industrial and Consumer Electronics
- Automotive Electronics
- On-site Maintenance and Field Testing
- Research and Development (R&D)
- Education and Training
Package Included:
- 1x Digital Oscilloscope
- 1x Power cord
- 1x USB2.0 printing cable
- 1x UT-P05 Passive Probe (200MHz)
- 1x UT-P04 Passive Probe (100MHz)
UNI-T UPO2204 Documents:
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.