Home
Shop
Wishlist0

74373 IC Eight Latches with 3-State Outputs

15.00 EGP

Buy Now
Availability: In Stock
SKU:9030078092530

The 74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system.

When the LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function, and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.

Image result for 74373 IC

Image result for 74373 IC

Features:- 

  • Typical propagation delay: 18 ns
  • Wide operating voltage range: 2 to 6 volts
  • Low input current: 1 µA maximum
  • Low quiescent current: 80 µA maximum (74 Series)
  • Output drive capability: 15 LS-TTL loads

Specifications:-

Parameter Specification
Supply Voltage (VCC − 0.5 to + 7.0V
Input Voltage (VIN)  −1.5VCC     + 1.5V
Output Voltage (VOUT)  − 0.5 to VCC + 0.5V
Clamp Diode Current (IIK, IOK)    ± 20 mA
DC Output Current, per pin (IOUT) ± 35 mA
   DC VCC or GND Current, per pin (ICC) ± 70 mA
 Storage Temperature Range (TSTG) − 65°C to + 150°C
Power Dissipation (PD) (Note 4)  600 mW
S.O. Package only   500 mW
Lead Temperature (TL) (Soldering 10 seconds) 260°C

Related Document:-

74HC373 IC Datasheet

Back to Top
Product has been added to your cart