Home
Shop
Wishlist0
08
d
:
07
h
:
59
m
:
42
s

IC 7406 Hex Inverter Buffer/Driver

Original price was: 13.00 EGP.Current price is: 10.50 EGP.

Buy Now
Availability: In Stock
SKU:300000011712

The 74×06 (ex 74LS06) is a chip with six open-collector inverters that has a maximum output voltage of 30V and a sink current of 40 mA so that they can interface with high-level circuits (such as MOSFETs), or for driving high-current loads.

When you have an open collector output, it means it’s easy to connect it to other chips that use different logic levels. However, it also means you can’t just swap it out with a regular inverter chip.

In this guide, you will learn everything you need to know about this chip and how to use inverters in your projects.

74HC06 / 74LS06 Package And Pinout
Package and pinout for 74×06
What does the 74HC06 / 74LS06 do?

The 74×06 gives you six open collector inverters that you can use individually. An inverter (or NOT gate) is a logic gate that outputs the opposite of the input. In the truth table below, you can see what the output will be for any given input:

NOT gate truth table
Truth table for the NOT gate (inverter)
How To Use This Chip

The 74LS06 comes in a 14-pin package, and you need to connect it to power before you can use it. Most 7400 ICs support a VCC voltage of 5V. One difference between the HC and LS versions of the chip is that the 74HC06 supports 2V to 6V, while the 74LS06 only supports 5V.

7400 series IC connected to 5V on a breadboard
74×06 Pinout

The 74×06 has 14 pins and contains six open-collector inverters, each with a maximum output voltage of 30V. Its pins are laid out as shown in the pinout diagram below:

74LS06 Pinout
Pin # Type Description
1 Input Input to the first NOT gate.
2 Output Open-collector output from the first NOT gate.
3 Input Input to the second NOT gate.
4 Output Open-collector output from the second NOT gate.
5 Input Input to the third NOT gate.
6 Output Open-collector output from the third NOT gate.
7 Power Connect to ground (GND).
8 Output Open-collector output from the fourth NOT gate.
9 Input Input to the fourth NOT gate.
10 Output Open-collector output from the fifth NOT gate.
11 Input Input to the fifth NOT gate.
12 Output Open-collector output from the sixth NOT gate.
13 Input Input to the sixth NOT gate.
14 Power Positive power supply (VCC). Connect to +5V power.
Technical Specifications
Physical
Case/Package PDIP
Mount Through Hole
Number of Pins 14
Technical
High Level Output Current -250 µA
Logic Function Buffer, Inverter, Inverting
Low Level Output Current 40 mA
Max Operating Temperature 70 °C
Max Supply Voltage 5.25 V
Min Operating Temperature 0 °C
Min Supply Voltage 4.75 V
Nominal Supply Current 100 µA
Number of Bits 6
Number of Channels 6
Number of Circuits 6
Number of Elements 6
Number of Gates 6
Number of Input Lines 6
Number of Inputs 1
Number of Output Lines 6
Number of Outputs 6
Operating Supply Current 100 µA
Operating Supply Voltage 5 V
Polarity Inverting
Propagation Delay 20 ns
Schmitt Trigger Input No
Termination Through Hole
Turn-On Delay Time 20 ns
7406 Datasheet

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Back to Top
Product has been added to your cart