Arduino Uno Development Kit

Arduino Uno Development Kit is a comprehensive development kit for Arduino Uno board that provides the most essential peripherals needed to start discovering the Arduino world.
Uno Kit is designed particularly for students, beginners, and recently graduated engineers to provide easy development of Arduino-based projects.

Uno Kit features

• Power supply unit
Uno kit can be powered from DC wall wart adapter (9-15V)/1A
• Microcontroller
1) Arduino Uno board (ATMEGA328P)
2) 14 Digital I/O pins (of which 6 pins can be used as PWM outputs)
3) 6 Analog inputs
4) 16MHz crystal oscillator
5) USB connection
6) DC power jack
7) ICSP header
8) Reset button
• Display
1) 80 character LCD (4X20) with backlight.
2) 2 Digit (common anode) 7 segment display with BCD decoder 7447.
• Input switches
6 switch keypad with pull-up resistors.
• Serial communication
1. UART communication
1) TTL (Full-duplex) female pin header.
2) RS232 (MAX232) (Full-duplex) standard DB9 female socket and pin header.
3) RS485 (MAX487) (Half-duplex) screw terminal.
2. I² C
1) DS3231 high precision RTC (Real Time Clock) with a backup battery.
2) AT24C08 serial EEPROM (1KB).
• Analog Inputs and sensors
1) One adjustable analog input using a high-precision multi-turn potentiometer.
2) Temperature sensor LM35 (0°C-  150°C) (0V – 1500mV).
3) Light Dependent Resistor LDR with adjustable sensitivity.
• Wireless
1. Wi-Fi module ESP-01 with reset switch and LED indicators for IO0 and IO2 ports.
2. Bluetooth module socket with mode switch (Bluetooth Module not included – buy one from here).
3. IR (Infrared Receiver) sensor VS1838.
• Outputs
1. Two output relays (10A) both normally open and normally closed are available with a status LED indicator.
2. General-purpose indicator LEDs ( Red, Green, and Blue).
3. Output buzzer.
• Motor driver
DC motor control (speed and direction) up to 4A with CW/CCW direction status LED Indicator.
• On-board connections
All Arduino pins are brought out via a female pin header for direct port connecting or plugging an Arduino Uno shield.

Documents

User manual

Firmware

test codes

Package includes:

• Uno development kit
• Arduino Uno board R3
• CR2032 Battery
• USB cable A male/B female type (optional)
• ESP-01 module