FNIRSI DSO-TC3 3 In 1 Handheld Multitester and Oscilloscope

Fnirsi DSO-TC3 Portable 3-in-1 Digital Oscilloscope & Transistor Tester & Signal Generator

Introduction:

Features:

• It is not only a digital oscilloscope, but also a transistor tester and a function signal generator, with one button to adjust fast to meet all needs of measurements.
• DSO-TC3 oscilloscope detects problems accurately and meets the needs of all component detection
• As a Transistor detector, it can automatically identify and measure various transistors, including NPN and PNP bipolar transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, thyristors, and passive components such as resistors, inductors, and capacitors
• As an oscilloscope, it has a real-time sampling rate of 10MS/s, a bandwidth of 500KHz, a maximum measurement of the 400V voltage signal, a complete trigger function (automatic, single, conventional), equipped with efficient one-button AUTO, can display the measured waveform without complicated adjustment
• As a signal generator, it has 6 signal waveforms: sine wave, square wave pulse wave, triangle wave, slope, DC, adjustable output frequency 1-100KHz, adjustable output voltage 3.3V, and adjustable output duty ratio 0-100%
• Multimeter tester has a small body and simple shape, it is very easy to take and use and can meet your daily needs for every measurement
• It also has an invisible bracket, that can release your hands.
• This multifunctional meter can be used for many occasions: DIY Learning, on-site commissioning, appliance repair, power measurement
• The tester has a 2.4-inch TFT color display and LED backlight, allowing you to read clearly in strong light

Specifications:

• Product Model: DSO-TC3
• Display: 2.4″ TFT colour screen with LED backlight
• Power supply voltage: Built-in 1500mAh rechargeable lithium battery
• Charging specification: USB Type-C 5V
• Product size: 79x103x31mm
• Real-time sampling rate: 10MSa/s
• Analog bandwidth: 500Khz
• Input impedance: 1MΩ
• Coupling method: AC/DC
• Test voltage range: 400V
• Vertical sensitivity: 10mV-10V
• Horizontal time base range: 1us~10s
• Trigger mode: Automatic normal single
• Trigger type: rising edge/falling edge
• Waveform freeze: Yes
• Automatic measurement: Yes
• Triode: B greater than 10 less than 600
• Diode: Forward voltage drop <4.5V
• Regulator diode: 0.01~32V
• Field effect tube: JFET/IGBT/MIOSTET
• Unidirectional/Bi-directional SCRs: turn-on voltage <5V, gate trigger current <6mA
• Capacitance: 5pF~100mF
• Resistance: 0.010~50MΩ
• Inductance: 10uH~1000mH
• Battery: 0.1~4.5V
• Input voltage: 0~40V
• DS18B20: 0~85℃
• DHT1: 0~60℃/5~95%
• Infrared remote control decoding: NEC protocol infrared code
• Sine wave: 1~10KHz/0~3.3V/50%
• Square wave: 1~100KHz/3.3V/50%
• Pulse wave: 1~100KHz/3.3V/0~100%
• Triangle wave: 1~10KHz/0~3.3V/50%
• Ramp: 1~10KHz/0~3.3V/0~100%
• DC: 0~3.3V

Package includes:

• 1 x DSO-TC3 Tester
• 3 x Test Hook
• 1 x Regular Probe
• 1 x Type-C Cable

Document:

DSO-TC3-_Manual