SOP8 & SOIC8 Programmer Breakout Clamp Set (with 2 Adapter Board)

Programming Adapter for SOP8 & SOIC8

This new IC programming clip is perfectly suited for reading or writing EEPROMS. It allows in-circuit, hands-free testing of SOIC8 or SOP8 chips, thereby offering the convenience of not having to remove the chips from the circuit board. The adapters are suitable for 24, 93, 25, 26, series chip and also supports many different EEPROMs having a width of 150mm to 210 mm. You can now program your SOIC8 or SOP8 chips with ease, just clip the chip and use one of the two breakout adapter boards to connect to your programmer!

When the programmer with protected function is encountered, the clip can not be read out under the normal voltage. At this time, it needs to add a voltage of 3.3V. The method is: the clip clamps the chip, the 8th pin corresponds to the chip Plus a 3.3V voltage pin folder. General 3.3V power supply has two lines, then the corresponding clamp VCC, the other line directly grounded on it

Quick Specifications:

• Contacting Material: Copper Alloy
• Connector Type: Test Clip
• Mounting Type: PC Board
• Case Style: SOIC/SOP 8
• Lead Spacing: 1.27mm
• Cable Length (Approx.): 200mm