DALY Lithium Battery Charger Protection Module (BMS) 10S 60A 36V

DALY BMS 10S 36V 60A Li-ion

Introduction about this BMS:

This bms is especially for 10S. Basically it can also be used for Lithium Ion Batteries.

Over charge and over discharge protection: 

The Lithium-ion battery pack will stop charge after the cell voltage reaches 4.25V and stop discharge when its voltage reaches 3V.

Temperature Protection:

• In high temperatures the bms ranges from 70℃ discharging battery protection.
• Meanwhile in low temperatures the bms ranges up to -20℃ battery protection.

Short circuit protection:

When there is a defect or damage to the circuit at same time the bms will shut down the whole Battery.

Specifications:

• Voltage: 36V 10S
• Brand name: DALY
• Cell type: lithium-ion (Li-Ion)
• Maximum charging voltage: 42V
• Maximum charging current: 60A
• Maximum continuous discharge current: 60A
• Connections: 2x4mm² (AWG10) wire.
• Overcharge protection: 4,25V +/-0,05
• Discharge protection: 2,7V +/-0,1
• Idle current consumption: 100µA
• Balancing current: 30mA +/-5
• Dimensions: 75x48x14mm

Applications:

Solar and RV, Electric bikes and Skateboard including camping boats and Power tools, Lawn moving and household energy storage systems etc.

What you will get:

• 10S Li-ion 60A rated voltage with 36V BMS
• Balanced wire sense cable (11 Wire sense cable with connector (Approx.): 50cm)
• Thermocouple

Conclusion:

Most important that it is only a waterproof bms available in lithium industry.

This BMS is also for all kinds of lithium-ion cells including 18650 ,21700,36500 cylindrical cells.