TINKERKIT T050000 Arduino R3 Shield and Robotic Arm Kit Guide

TINKERKIT T050000 Robotic Arm: Explore its components, servo motors, Arduino setup, programming, applications, and safety.

TINKERKIT T050000
في هذه الصفحة
  1. 1. Introduction
  2. 2. What Is the TINKERKIT T050000 Robotic Arm?
  3. 3. TINKERKIT T050000 Kit Components
  4. 4. Main Components Included in the Kit
  5. 5. Mechanical Structure and Six Degrees of Freedom
  6. 6. Technical Specifications and Servo Characteristics
  7. 7. Understanding the SR431 and SR311 Servo Motors
  8. 8. Arduino R3 Shield, Connections, and Pin Mapping
  9. 9. Power Supply and Electrical Requirements
  10. 10. Robotic Arm Assembly and Arduino Software Setup
  11. 11. Programming and Controlling the Robotic Arm
  12. 12. Understanding Robotic Arm Kinematics
  13. 13. Practical Applications and Customization
  14. 14. Troubleshooting
  15. 15. Maintenance
  16. 16. Safety
  17. 17. Frequently Asked Questions
  18. 18. Conclusion
  19. 1. المقدمة
  20. 2. ما هي الذراع الروبوتية TINKERKIT T050000؟
  21. 3. مكونات مجموعة TINKERKIT T050000
  22. 4. المكونات الرئيسية المرفقة مع المجموعة
  23. 5. الهيكل الميكانيكي ودرجات الحرية الست
  24. 6. المواصفات الفنية وخصائص محركات السيرفو
  25. 7. التعرف على محركات السيرفو SR431 وSR311
  26. 8. درع Arduino R3 والتوصيلات وتوزيع المنافذ
  27. 9. مصدر الطاقة والمتطلبات الكهربائية
  28. 10. تجميع الذراع الروبوتية وإعداد برنامج Arduino
  29. 11. برمجة الذراع الروبوتية والتحكم في حركتها
  30. 12. فهم علم الحركة للذراع الروبوتية (Robotic Arm Kinematics)
  31. 13. التطبيقات العملية وتخصيص الذراع الروبوتية
  32. 14. استكشاف الأخطاء وإصلاحها
  33. 15. الصيانة
  34. 16. إرشادات السلامة
  35. 17. الأسئلة الشائعة
  36. 18. الخاتمة

Time Reading: 20min.

1. Introduction

The TINKERKIT T050000 Arduino R3 Shield, TinkerKit Arm Robotics Kit is an educational robotics kit designed to help users build, program, and experiment with a multi-joint robotic arm. It combines a mechanical arm structure, six servo motors, and an Arduino-compatible control shield to create a platform for learning robotics, motion control, and embedded programming.

The robotic arm, commonly known as Braccio, can perform movements such as rotating its base, raising and lowering its arm sections, changing the wrist orientation, and opening or closing its gripper. These movements allow it to pick up, move, and position lightweight objects.

The included control shield provides connections for the arm’s six servo motors and is designed to work with a compatible Arduino board using the Braccio software library. This makes it possible to control the arm through programming commands without designing a separate servo-control circuit for every joint.

The kit is suitable for students, electronics hobbyists, robotics enthusiasts, and engineers who want to explore mechanical movement, servo control, programming, and basic robotic-arm operation.

In this guide, you will learn about the T050000 kit, its components, mechanical structure, servo motors, shield connections, electrical requirements, assembly, and programming. You will also find example Arduino code, movement concepts, practical applications, troubleshooting advice, maintenance recommendations, and important safety considerations.

2. What Is the TINKERKIT T050000 Robotic Arm?

The TINKERKIT T050000 is a robotic-arm kit that combines a multi-joint mechanical structure with six servo motors and an Arduino-compatible shield.

It is designed to be assembled and controlled using a compatible Arduino board. Individual servo motors control different sections of the mechanical structure, allowing the controller to move the arm in different directions and operate its gripper.

The included shield simplifies the electrical connections between the servos and the Arduino board. Instead of connecting six servo signal wires individually to separate driver circuits, the servos connect to dedicated motor outputs on the shield.

The kit is supplied with the mechanical parts, servos, shield, power supply, and assembly accessories. However, the Arduino controller board is not included and must be obtained separately.

Main Features

The main features of the T050000 robotic-arm kit include:

  • Six servo motors for controlling the robotic arm’s joints and gripper.
  • A mechanical structure with multiple joints and a gripping mechanism.
  • An Arduino-compatible shield for connecting and controlling the servos.
  • A modular structure that can be assembled in different configurations.
  • A dedicated software library for controlling the arm through Arduino code.
  • A regulated external power supply included with the kit.
  • Support for robotics experiments involving object handling, movement, and positioning.
What Can the Robotic Arm Do?

The robotic arm can perform several basic movements:

  • Rotate its base to change the direction in which the arm faces.
  • Raise or lower the shoulder section.
  • Move the elbow joint to extend or fold the arm.
  • Adjust the wrist vertically.
  • Rotate the wrist to change the gripper orientation.
  • Open and close the gripper to hold or release objects.

By combining these movements, the arm can reach different positions within its working area. Its actual reach and payload depend on the arm configuration and mechanical load.

3. TINKERKIT T050000 Kit Components

The TINKERKIT T050000 kit includes the mechanical parts, servo motors, control shield, power supply, and assembly accessories required to build the Braccio robotic arm.

These components work together to provide a complete platform for experimenting with robotic movement and Arduino-based control.

The following list describes the components included in the kit according to the Makers Electronics product listing.

Components Included in the Kit
Component Quantity Description
Plastic structural parts 21 Form the robotic arm’s base, links, joints, wrist, and gripper structure.
Screws 63 Secure the mechanical parts and connect the different sections of the arm.
Flat washers 16 Help distribute fastening pressure and support secure mechanical connections.
Hexagonal nuts 7 Fasten compatible screws and mechanical components.
Springs 2 Provide the spring elements required by the arm’s mechanical assembly.
SR311 servo motors 2 Provide controlled movement for the arm’s lower-torque mechanisms.
SR431 servo motors 4 Provide higher-torque movement for the main arm joints.
Arduino-compatible shield (Braccio Shield V4) 1 Connects the six servo motors to a compatible Arduino controller.
5 V, 4 A power supply 1 Supplies external power to the robotic arm through the shield’s power connection.
Phillips screwdriver 1 Helps assemble the mechanical structure using the supplied screws.
Spiral cable-protection wrap 1 Organizes and protects the servo cables along the robotic arm.
Mechanical Structural Parts and Fasteners

The 21 plastic structural parts form the physical body of the Braccio robotic arm. They include the components needed to construct its base, arm sections, joint supports, wrist, and gripping mechanism.

The supplied screws, washers, and hexagonal nuts secure these parts together. Correct positioning and tightening are important because loose or misaligned components can affect movement and increase mechanical resistance.

The two springs are also included as part of the mechanical assembly. Their placement should follow the kit’s assembly instructions.

Servo Motors

The kit contains six servo motors in two different models:

  • Four SR431 servos: Higher-torque motors used for the more demanding arm movements.
  • Two SR311 servos: Lower-torque motors used for the remaining mechanisms.

Each servo controls a specific movement through a signal from the Braccio Shield.

Braccio Shield and Power Supply

The Braccio Shield V4 provides the electrical interface between the servo motors and a compatible Arduino board. It offers dedicated servo connections and a power input for operating the robotic arm.

The included regulated 5 V, 4 A power supply provides external power to the shield and servo system.

Important: The Arduino controller board itself is not listed among the included kit components. You must obtain a compatible Arduino board separately to program and operate the robotic arm.

Assembly Accessories

The kit also includes a Phillips screwdriver for mechanical assembly and a spiral cable-protection wrap for organizing the servo wiring.

These accessories help simplify assembly and cable management, keeping the wiring organized as the robotic arm moves.

4. Main Components Included in the Kit

The T050000 kit contains the mechanical and electronic components required to assemble and operate the robotic arm, apart from the Arduino controller board.

Components Included in the Kit

According to the manufacturer’s product information, the kit includes:

Component Quantity
Plastic mechanical parts 21
Screws 63
Flat washers 16
Hexagonal nuts 7
Springs 2
SR311 servo motors 2
SR431 servo motors 4
Arduino-compatible robotic-arm shield 1
Regulated 5 V, 4 A power supply 1
Phillips screwdriver 1
Spiral cable-protection wrap 1
Mechanical Parts

The mechanical parts form the structure of the robotic arm. They include the base, arm sections, joint supports, wrist components, and gripper mechanism.

The plastic structural components are connected using screws, washers, and nuts. Correct assembly is important because loose or misaligned joints can affect movement accuracy and increase the load on the servo motors.

The included springs are used as part of the mechanical assembly according to the kit’s construction instructions.

Servo Motors

The kit uses six servo motors to provide controlled movement:

  • Four SR431 servos provide the higher torque required by the main arm joints.
  • Two SR311 servos are used for the remaining movements, including wrist and gripper functions.

Each servo receives a control signal from the shield and moves its output shaft toward the commanded position.

Arduino-Compatible Shield and Power Supply

The robotic-arm shield connects the six servo motors to the Arduino-compatible controller. It provides dedicated servo connections, control-signal routing, and a power connection for the robotic arm.

The kit also includes a regulated 5 V, 4 A power supply intended to power the arm through the shield’s power jack.

5. Mechanical Structure and Six Degrees of Freedom

The T050000 robotic arm uses a series of connected mechanical sections. Each section moves through a servo-controlled joint, allowing the arm to change its position and orientation.

The six servo motors provide six controlled movements, commonly described as six degrees of freedom (6-DOF).

Understanding the Six Movements
Motor Movement Function
M1 Base rotation Rotates the entire arm horizontally
M2 Shoulder movement Raises or lowers the main arm section
M3 Elbow movement Bends or extends the arm
M4 Wrist vertical movement Changes the vertical angle of the wrist
M5 Wrist rotation Rotates the wrist around its axis
M6 Gripper movement Opens or closes the gripping mechanism

These movements work together to position the gripper and orient it toward an object.

Base, Shoulder, and Elbow

The base is the bottom section of the robotic arm. It supports the complete structure and allows the arm to rotate horizontally. This movement is useful when reaching objects located at different positions around the base.

The shoulder raises or lowers the main arm section, while the elbow changes the angle between the connected arm sections. These joints are particularly important because they support the weight of the arm and any object held by the gripper.

Wrist and Gripper

The wrist vertical movement adjusts the angle of the end section, while wrist rotation changes the gripper’s orientation.

The gripper servo controls the opening and closing movement. It allows the arm to hold lightweight objects and release them at a selected location.

Why Six Degrees of Freedom Matter

A robotic arm with six degrees of freedom can control both the position and orientation of its end effector within its mechanical working range.

For example, the arm can approach an object from a particular direction, adjust the gripper orientation, and then close the gripper to hold it.

However, six degrees of freedom do not mean that the arm can reach every possible position or orientation. Its movement is limited by the mechanical joint ranges, arm dimensions, servo capabilities, and physical interference between components.

6. Technical Specifications and Servo Characteristics

The technical specifications describe the mechanical dimensions, payload capability, servo characteristics, and electrical requirements of the robotic-arm kit. These specifications should be considered before assembling the arm or designing an application around it.

General Kit Specifications
Specification Value
Product code T050000
Robotic-arm type Six-servo robotic arm
Mechanical parts 21
Servo motors 2 × SR311 and 4 × SR431
Compatible controller Arduino board with R3 shield layout
Control shield Arduino-compatible robotic-arm shield
Recommended power supply Regulated 5 V DC, 4 A
Assembled weight 792 g
Maximum operating distance 80 cm
Maximum height 52 cm
Base width 14 cm
Gripper width 90 mm
Cable length 40 cm
Maximum load at 32 cm operating distance 150 g
Maximum load in minimum Braccio configuration 400 g
Understanding the Payload Specification

Payload is the maximum load that the robotic arm can handle under specified mechanical conditions.

For the T050000 kit, the stated maximum load is 150 g at an operating distance of 32 cm. The maximum load increases to 400 g in the minimum Braccio configuration.

This difference occurs because the torque required at a joint increases with the distance between the joint and the load.

For example, holding a 150 g object close to the base generally requires less torque than holding the same object at the end of a fully extended arm.

The payload specification should therefore be evaluated together with the arm configuration and operating distance rather than treated as one universal lifting limit.

7. Understanding the SR431 and SR311 Servo Motors

Servo motors are the main actuators responsible for the movement of the T050000 robotic arm. Each servo converts an electrical control signal into controlled mechanical rotation.

The kit uses two servo models with different torque and speed characteristics.

SR431 Servo Specifications

The kit includes four SR431 servo motors. These servos provide the higher torque used by the main arm joints.

Specification At 4.8 V At 6.0 V
Torque 12.2 kg·cm 14.5 kg·cm
Speed 0.20 s/60° 0.18 s/60°

Additional SR431 specifications:

  • Control signal: Analog PWM.
  • Rotation range: 180°.
  • Gear material: Metal.
  • Bearing support: Dual bearings.
  • Weight: 62 g.
  • Dimensions: 42 × 20.5 × 39.5 mm.
  • Connector type: J-type servo connector.
SR311 Servo Specifications

The kit includes two SR311 servo motors for the remaining arm movements.

Specification At 4.8 V At 6.0 V
Torque 3.1 kg·cm 3.8 kg·cm
Speed 0.14 s/60° 0.12 s/60°

Additional SR311 specifications:

  • Control signal: Analog PWM.
  • Rotation range: 180°.
  • Gear material: Metal.
  • Bearing support: Dual bearings.
  • Weight: 27 g.
  • Dimensions: 31.3 × 16.5 × 28.6 mm.
  • Connector type: J-type servo connector.
Why Are Two Servo Types Used?

The main arm joints support the weight of the mechanical structure and any object being handled. These joints generally require more torque than the smaller wrist and gripper mechanisms.

The SR431 servos provide higher torque and are therefore suitable for the more demanding arm movements. The SR311 servos provide lower torque and are used for movements with different mechanical requirements.

Using different servo models allows the robotic arm to combine the required mechanical strength with a practical overall design.

Understanding Servo Torque and Speed

Torque describes the turning force produced by a servo around its output shaft. Servo torque is commonly expressed in kilogram-centimeters (kg·cm).

For example, a servo rated at 12.2 kg·cm at a specified voltage has a nominal torque corresponding to approximately 12.2 kgf acting at a 1 cm lever arm under the stated test conditions.

The torque required by a robotic-arm joint depends on:

  • The weight of the arm sections supported by the joint.
  • The weight of the object being carried.
  • The distance between the joint and the load.
  • The arm’s orientation.
  • Mechanical friction and acceleration.
  • The required safety margin.

Servo speed is commonly expressed in seconds per 60 degrees. For example, an SR431 speed rating of 0.20 s/60° at 4.8 V means that the servo takes approximately 0.20 seconds to move through 60 degrees under the manufacturer’s stated test conditions.

Actual movement time depends on mechanical load, supply voltage, friction, and the control system. A servo operating under a heavy load may move more slowly than the same servo operating without a load.

Servo Operating Range

The SR431 and SR311 specifications indicate a nominal rotation range of 180 degrees.

However, the usable movement of each assembled robotic-arm joint is also restricted by the mechanical structure and the Braccio library’s configured limits.

A servo should not be commanded beyond the range permitted by the assembled mechanism. Doing so can cause the arm to strike mechanical stops, increase current consumption, and damage the gears or motor.

8. Arduino R3 Shield, Connections, and Pin Mapping

The Arduino-compatible shield is the electronic interface between the controller board and the six servo motors.

It is designed to mount on a compatible Arduino board and provides dedicated motor-control connections for the robotic arm.

Main Functions of the Shield

The shield performs several important functions:

  • Provides servo signal connections for the six motors.
  • Routes the control signals from the Arduino board to the corresponding servos.
  • Provides a power connection for the robotic arm.
  • Simplifies the wiring arrangement.
  • Allows the Braccio software library to control the arm through the Arduino controller.

The shield does not replace the Arduino controller.

The Arduino board still executes the program and generates the commands used to move the servos.

Servo Control Pin Configuration

The Braccio shield uses the following Arduino digital pins for the six servo motors:

Arduino Pin Motor Function
D11 M1 Base rotation
D10 M2 Shoulder movement
D9 M3 Elbow movement
D6 M4 Wrist vertical movement
D5 M5 Wrist rotation
D3 M6 Gripper movement

These pin assignments are used by the Braccio control arrangement. They should not be changed in software without also considering the shield’s physical connections and library configuration.

Connecting the Shield to an Arduino Board

The basic installation procedure is:

  1. Place the Arduino board on a stable, non-conductive surface.
  2. Align the shield’s headers with the corresponding Arduino R3 headers.
  3. Carefully press the shield into position, ensuring that the pins are correctly aligned.
  4. Check that no header is bent or connected to the wrong position.
  5. Connect the servo power supply only after checking the complete assembly.

The shield is designed for an Arduino-compatible R3 header arrangement. Confirm board compatibility before connecting it.

9. Power Supply and Electrical Requirements

The power supply is an important part of the T050000 robotic-arm system.

Six servo motors can require substantial current, especially when several joints move simultaneously or when the arm holds an object.

The manufacturer recommends powering the shield through its jack connection using a regulated 5 V DC, 4 A supply. The kit includes a suitable supply according to the official product information.

Why Does the Robotic Arm Need an External Power Supply?

A servo motor contains an internal DC motor and control electronics. When the servo moves or resists an external force, it draws current from the power supply.

The current demand can increase significantly when:

  • Several servos move at the same time.
  • The arm carries a mechanical load.
  • A joint experiences increased friction.
  • A servo approaches a mechanical stop.
  • The arm is prevented from reaching its commanded position.

Powering the complete robotic arm through the Arduino USB connection is therefore not an appropriate general operating arrangement.

Connecting the Power Supply

The general power arrangement is:

  1. Connect the regulated 5 V DC supply to the shield’s designated power jack.
  2. Ensure that the supply voltage and polarity match the shield’s requirements.
  3. Connect the Arduino board to the shield through the compatible headers.
  4. Connect the servos to their designated motor connectors.
  5. Check all connections before switching on the system.

Do not apply an unverified voltage to the shield or servo connectors. Incorrect polarity or excessive voltage can damage the electronics.

Power Supply and Current Considerations
  • The recommended 5 V, 4 A supply provides a regulated voltage and current capacity suitable for the intended kit configuration.
  • A power supply’s current rating indicates the maximum current it can deliver under its specified operating conditions.
  • It does not force that current into the circuit; the connected system draws the current it requires.
  • If the supply is undersized, the voltage may drop when several servos move or when the arm carries a load.
  • This can cause unexpected movement, controller resets, or unstable operation.

10. Robotic Arm Assembly and Arduino Software Setup

Before programming the robotic arm, assemble its mechanical structure, install the control shield, and prepare the Arduino development environment.

Mechanical Assembly

The kit includes the plastic structural parts, screws, washers, nuts, springs, and screwdriver required for assembly.

Follow the kit’s construction instructions to identify the correct position and orientation of each part.

During assembly:

  1. Identify and organize the mechanical parts before starting.
  2. Assemble the base and its servo mechanism.
  3. Install the main arm sections and their corresponding servo motors.
  4. Assemble the wrist and gripper mechanisms.
  5. Secure the components using the supplied screws, washers, and nuts.
  6. Check that the joints move freely without excessive friction.
  7. Route the servo cables carefully through the arm.
  8. Use the spiral cable-protection wrap where appropriate.
  9. Confirm that the cables do not become trapped or stretched during movement.

Correct mechanical alignment is important. Misaligned components can increase friction, place unnecessary loads on the servos, and prevent the arm from reaching its commanded positions.

Connecting the Servo Motors

Connect each servo to its designated motor output on the shield. Follow the motor labels and pin mapping described in the previous section.

Check the connector orientation and ensure that each servo is connected to the correct output before applying power.

Installing the Arduino IDE

The Arduino IDE is used to write, compile, and upload programs to the controller board.

The general setup process is:

  1. Download and install the Arduino IDE.
  2. Connect a compatible Arduino board to the computer using a USB cable.
  3. Open the Arduino IDE.
  4. Select the correct Arduino board from the board selection menu.
  5. Select the appropriate communication port.
  6. Install the Braccio library before compiling the robotic-arm program.
Installing the Braccio Library

The Braccio library provides functions for initializing and controlling the robotic arm.

To install it:

  1. Open the Arduino IDE.
  2. Open the Library Manager.
  3. Search for the Braccio library.
  4. Select the appropriate library entry.
  5. Install it.
  6. Restart or refresh the IDE if the library is not immediately available.

After installation, include the library in your program using:

#include <Braccio.h>

The exact library behavior and available functions can depend on the installed version. Use the documentation corresponding to that version.

11. Programming and Controlling the Robotic Arm

The Braccio library simplifies robotic-arm control by providing functions for initializing the system and commanding the six servo motors.

Instead of generating individual servo signals manually, you can specify the desired positions of the arm’s joints through a movement command.

Initializing the Robotic Arm

The initialization function is:

Braccio.begin();

This prepares the library and moves the arm into its initial reference positions according to the library’s initialization procedure.

The documented initial positions are:

Motor Initial Position Function
M1 90° Base
M2 45° Shoulder
M3 180° Elbow
M4 180° Wrist vertical
M5 90° Wrist rotation
M6 10° Gripper

The gripper’s initial value of 10° represents its open position in the Braccio control convention.

Understanding the ServoMovement Function

The main movement function is:

Braccio.ServoMovement(stepDelay, M1, M2, M3, M4, M5, M6);

The parameters are:

  • StepDelay: Controls the delay between movement steps, in milliseconds.
  • M1: Desired base angle.
  • M2: Desired shoulder angle.
  • M3: Desired elbow angle.
  • M4: Desired wrist vertical angle.
  • M5: Desired wrist rotation angle.
  • M6: Desired gripper position.

The function allows the controller to command all six servos as part of one movement operation.

The documented step-delay range is 10–30 ms. The selected value affects movement progression, but it should not be interpreted as a direct servo-speed setting.

Servo Movement Limits

The Braccio library defines permitted movement ranges for the six motors:

Motor Function Permitted Range
M1 Base 0–180°
M2 Shoulder 15–165°
M3 Elbow 0–180°
M4 Wrist vertical 0–180°
M5 Wrist rotation 0–180°
M6 Gripper 10–73°

These values are the library’s documented control limits. The actual safe movement may also depend on assembly, mechanical interference, and the object being handled.

For the gripper, 10° represents the open position and 73° represents the closed position in the library’s standard convention.

Basic Robotic Arm Movement Example

The following example initializes the robotic arm and moves it through several positions.

#include <Braccio.h>

void setup() {
  // Initialize the robotic arm
  Braccio.begin();

  delay(1000);

  // Move to the first position
  Braccio.ServoMovement(20, 90, 45, 180, 180, 90, 10);

  delay(1000);

  // Move the arm to another position
  Braccio.ServoMovement(20, 90, 90, 90, 90, 90, 10);

  delay(1000);

  // Close the gripper
  Braccio.ServoMovement(20, 90, 90, 90, 90, 90, 73);

  delay(1000);

  // Return the gripper to the open position
  Braccio.ServoMovement(20, 90, 90, 90, 90, 90, 10);
}

void loop() {
  // No repeated movement in this example
}
Understanding the Code
  • #include <Braccio.h> includes the Braccio library.
  • Braccio.begin(); initializes the robotic arm.
  • Braccio.ServoMovement() sends the desired positions to the six servos.
  • The first argument, 20, specifies the movement step delay in milliseconds.
  • The remaining six arguments specify the target positions of M1 through M6.
  • delay(1000); pauses the program for one second between movement commands.

The example uses the library’s documented position convention. Before running a new movement sequence, verify that the arm is assembled correctly and that the commanded positions do not cause mechanical interference.

Controlling Each Joint Individually

Although the Braccio library can command all six servos in one function call, understanding each joint separately makes it easier to develop more advanced movement sequences.

Each motor controls a different part of the robotic arm. Changing one motor’s target angle while keeping the other values unchanged allows you to observe its individual effect.

Controlling the Base

The base motor is M1 and is connected to Arduino pin D11. Its documented range is 0–180 degrees. Changing its angle rotates the complete arm horizontally.

For example:

Braccio.ServoMovement(20, 45, 45, 180, 180, 90, 10);

This command requests a base position of 45 degrees while the other joints receive their specified target positions.

Controlling the Shoulder

The shoulder motor is M2 and is connected to Arduino pin D10. Its documented range is 15–165 degrees.

It raises or lowers the main arm section. Changing the shoulder angle affects the height and reach of the gripper and also changes the load experienced by the shoulder servo.

Controlling the Elbow

The elbow motor is M3 and is connected to Arduino pin D9. Its documented range is 0–180 degrees.

It changes the angle between the main arm sections and is important for extending or folding the arm and adjusting the gripper’s position.

Controlling the Wrist

The wrist uses two servo motors:

  • M4 controls vertical wrist movement and is connected to D6.
  • M5 controls wrist rotation and is connected to D5.

These movements adjust the orientation of the gripper so that it can approach an object from a suitable direction.

Controlling the Gripper

The gripper motor is M6 and is connected to D3. Its documented range is 10–73 degrees.

  • 10 degrees: Open gripper.
  • 73 degrees: Closed gripper.

The gripper is designed to hold lightweight objects. Do not force it to close around an object that is too large or too heavy, as this can overload the servo or damage the mechanical parts.

Creating a Pick-and-Place Movement Sequence

A pick-and-place operation is one of the most common robotic-arm demonstrations. The arm moves toward an object, closes its gripper, lifts the object, moves to another position, and releases it.

The T050000 robotic arm can demonstrate this process using a sequence of servo-position commands.

A basic pick-and-place operation involves:

  1. Move the arm toward the object.
  2. Position the gripper above or around the object.
  3. Open the gripper.
  4. Lower the arm to the required gripping position.
  5. Close the gripper to hold the object.
  6. Raise the arm to lift the object.
  7. Rotate or move the arm toward the destination.
  8. Lower the object into the required position.
  9. Open the gripper to release the object.
  10. Return the arm to a suitable resting position.

The exact joint angles depend on the physical arrangement of the arm, the object’s location, and the dimensions of the working area.

Example Pick-and-Place Program

The following example demonstrates the structure of a simple movement sequence. The joint positions are illustrative and must be adjusted and tested for the actual assembly and object.

#include <Braccio.h>

void setup() {
  Braccio.begin();

  delay(1000);

  // Move above the object with the gripper open
  Braccio.ServoMovement(20, 90, 90, 90, 90, 90, 10);
  delay(1000);

  // Lower the arm toward the object
  Braccio.ServoMovement(20, 90, 110, 70, 90, 90, 10);
  delay(1000);

  // Close the gripper
  Braccio.ServoMovement(20, 90, 110, 70, 90, 90, 73);
  delay(1000);

  // Lift the object
  Braccio.ServoMovement(20, 90, 90, 100, 90, 90, 73);
  delay(1000);

  // Move toward the destination
  Braccio.ServoMovement(20, 140, 90, 100, 90, 90, 73);
  delay(1000);

  // Lower the object
  Braccio.ServoMovement(20, 140, 110, 70, 90, 90, 73);
  delay(1000);

  // Release the object
  Braccio.ServoMovement(20, 140, 110, 70, 90, 90, 10);
  delay(1000);

  // Move back to a resting position
  Braccio.ServoMovement(20, 90, 45, 180, 180, 90, 10);
}

void loop() {
}
Important Notes About the Example

The example demonstrates how to organize a pick-and-place sequence, but it is not a universal movement program for every assembly.

Before using it with an object:

  • Check that the arm can reach the intended positions without striking the base or surrounding parts.
  • Test the movements without an object first.
  • Use a lightweight object within the kit’s payload limits.
  • Adjust the angles gradually.
  • Check that the gripper closes without excessive force.
  • Observe the servo motors for buzzing, overheating, or unusual movement.

The actual object position and arm configuration determine the appropriate joint angles. A successful sequence for one setup may not work correctly in another.

12. Understanding Robotic Arm Kinematics

Kinematics is the study of motion without directly considering the forces that cause it. In robotics, kinematics helps describe the relationship between joint angles and the position and orientation of the end effector.

For the T050000 robotic arm, the end effector is the gripper.

Understanding basic kinematics helps users move beyond manually selecting servo angles and begin developing more systematic robotic movements.

Forward Kinematics

Forward kinematics calculates the position and orientation of the gripper using the known angles of the robotic-arm joints.

For example, if the angles of the base, shoulder, and elbow are known, a kinematic model can estimate the position of the gripper relative to the base.

The calculation depends on the dimensions of the arm sections and the geometry of the joints.

In a simplified planar two-link arm, the end-point coordinates can be calculated using:

[
x=L_1\cos(\theta_1)+L_2\cos(\theta_1+\theta_2)
]

[
y=L_1\sin(\theta_1)+L_2\sin(\theta_1+\theta_2)
]

Where:

  • (L_1) is the length of the first arm section.
  • (L_2) is the length of the second arm section.
  • (\theta_1) is the first joint angle.
  • (\theta_2) is the second joint angle.
  • (x) and (y) represent the calculated end-point coordinates.

These equations describe a simplified two-link planar mechanism. The complete Braccio arm has additional joints, so a complete model requires its actual geometry and coordinate conventions.

Inverse Kinematics

Inverse kinematics works in the opposite direction. It calculates the joint angles required to place the gripper at a requested position and orientation.

For example, if you want the gripper to reach a particular point, an inverse-kinematics algorithm attempts to determine the required base, shoulder, elbow, and wrist angles.

Inverse kinematics is more complex because:

  • A requested position may be outside the arm’s reachable workspace.
  • More than one joint configuration may reach the same position.
  • Some positions may cause mechanical collisions.
  • The calculated angles must remain within the permitted joint ranges.
  • The gripper orientation must also be considered.

The Braccio library provides direct joint-position commands. This does not mean that every requested Cartesian position is automatically converted into joint angles.

Workspace and Reachability

The workspace is the region that the robotic arm can reach with its gripper.

The workspace depends on:

  • The lengths of the mechanical arm sections.
  • The permitted angular range of each joint.
  • The orientation of the base.
  • The dimensions of the gripper.
  • Mechanical interference between the arm sections.
  • The physical environment around the robot.

A position inside the arm’s theoretical reach may still be inaccessible if the required joint angles exceed the mechanical or software limits.

13. Practical Applications and Customization

The T050000 robotic arm can be used in educational and experimental projects involving object handling, movement control, and automation. Its six servo motors provide a practical way to study how multiple joints work together to control a robotic mechanism.

Pick-and-Place and Object Sorting

The arm can be programmed to pick up lightweight objects and place them at different positions.

This project demonstrates:

  • Servo positioning.
  • Movement sequencing.
  • Gripper control.
  • Basic automation.
  • Mechanical load considerations.

The arm can also be used in a simple sorting demonstration. Objects can be placed in a working area, and the arm can move them to different locations based on a predefined program or external sensor input.

For example, a controller can use a sensor to identify an object category and then execute a corresponding movement sequence. The sorting logic and object-recognition system must be developed separately.

Camera Positioning

A lightweight camera or compatible imaging device can be mounted to the arm or its end section, provided that the mounting arrangement and payload remain within the mechanical limits.

This can be used for:

  • Camera positioning experiments.
  • Object observation.
  • Remote-controlled camera movement.
  • Basic machine-vision demonstrations.

The added device must be mounted securely, and its weight must be considered when calculating the load on the arm.

Sensor-Based Robotic Arm

The arm can be combined with sensors to create a system that responds to its environment.

Possible additions include:

  • Ultrasonic distance sensors for detecting nearby objects.
  • Infrared sensors for simple object detection.
  • Color sensors for identifying object colors.
  • Limit switches for external position references.
  • Cameras for image-processing experiments.

These sensors require suitable electrical connections and additional programming. Their outputs can be used by the Arduino controller to select movement sequences.

Remote-Controlled Robotic Arm

A remote-control interface can be added to command the robotic arm from another device.

Possible control methods include:

  • Bluetooth communication.
  • Wireless communication modules.
  • Serial commands from a computer.
  • A joystick or potentiometer-based control interface.

The communication system must be integrated with the movement program, and the controller should handle invalid or interrupted commands safely.

Educational Robotics Projects

The kit is useful for learning several important robotics concepts:

  • Servo motor control.
  • Arduino programming.
  • Mechanical assembly.
  • Degrees of freedom.
  • Forward and inverse kinematics.
  • Motion sequencing.
  • Payload and torque calculations.
  • Sensor integration.
  • Basic automation.
Expanding and Customizing the Robotic Arm

The modular design of the Braccio platform allows users to explore different configurations and experiment with additional components. However, every modification should consider mechanical load, servo torque, electrical power, and movement limits.

Changing the mechanical configuration affects:

  • The distance between the joints.
  • The maximum reachable position.
  • The height of the gripper.
  • The load applied to each servo.
  • The overall stability of the structure.

A configuration that provides a longer reach may reduce the payload that can be handled safely.

External sensors can be connected to available Arduino pins, provided that the required pins are not already used by the shield or another peripheral.

Before connecting a sensor, check its operating voltage, output signal level, current requirements, available Arduino pins, and any timer or peripheral conflicts with the Braccio library.

A camera, small sensor, or lightweight accessory may also be attached to a suitable part of the arm if the mechanical configuration supports it. Check its total mass, distance from the supporting joint, required torque, mounting security, and cable routing. The manufacturer’s stated payload limits should not be exceeded.

14. Troubleshooting

Understanding common problems helps maintain reliable operation and prevents unnecessary damage to the robotic arm.

Common Problems and Solutions
Problem Possible Cause Recommended Solution
Robotic arm does not move No power, incorrect wiring, or missing initialization Check the power supply, shield connections, and program
Arduino resets when servos move Power supply voltage drop or excessive current demand Check the supply and connections; use the specified power arrangement
One servo does not move Loose connector, damaged cable, or incorrect motor connection Check the servo connector and corresponding shield output
Servo makes a buzzing sound Mechanical obstruction or excessive load Disconnect power and inspect the joint
Arm moves in an unexpected direction Incorrect assembly or movement command Check servo orientation, motor mapping, and code parameters
Gripper does not close correctly Incorrect gripper position or mechanical interference Check the gripper assembly and permitted M6 range
Arm cannot lift an object Payload exceeds the permitted load or the arm is extended too far Reduce the load or change the arm configuration
Movement is unstable Power instability, loose connections, or mechanical friction Check the supply, wiring, and mechanical joints
Servo becomes hot Excessive load, prolonged stall, or mechanical binding Disconnect power and investigate the cause
Checking the Power Supply

If the Arduino resets or the servos behave unpredictably during movement, begin by checking the power supply.

Verify that:

  • The supply provides the recommended regulated 5 V DC output.
  • The current capacity is appropriate for the robotic arm.
  • The power connector is fully inserted.
  • The supply cable is not damaged.
  • The connections are secure.

A voltage drop under load can cause unstable operation even when the system appears to work correctly while idle.

Checking Mechanical Movement

If a servo buzzes, strains, or fails to reach a commanded position, inspect the corresponding joint.

Check for:

  • Misaligned mechanical parts.
  • Overtightened screws.
  • Objects obstructing the movement.
  • Cables trapped between moving components.
  • Excessive payload.
  • Commands that exceed the permitted joint range.

Do not allow a servo to remain energized while it is mechanically blocked.

15. Maintenance

Regular inspection and basic maintenance help keep the robotic arm in good working condition and reduce the likelihood of mechanical or electrical problems.

Mechanical Inspection
  • Check the screws, nuts, washers, and other mechanical fasteners.
  • Confirm that the joints are correctly aligned.
  • Check that the gripper opens and closes freely.
  • Inspect the arm for cracks or damaged plastic parts.
  • Remove dust and debris from the mechanical joints.
  • Check for unusual friction or resistance during movement.
Servo and Cable Inspection
  • Inspect servo cables and connectors for damage.
  • Check that each servo remains securely mounted.
  • Verify that cables are not stretched, pinched, or trapped by moving sections.
  • Check that the servo connectors remain firmly connected to their designated shield outputs.
  • Pay attention to unusual buzzing, overheating, or inconsistent movement.
Power Connection Inspection
  • Verify that the power connector is secure.
  • Inspect the power cable for visible damage.
  • Check that the supply continues to provide the recommended regulated output.
  • Investigate unexpected controller resets or unstable servo operation before continuing to use the arm.

16. Safety

The T050000 robotic arm contains moving mechanical parts and electrically powered servo motors. Safe operation requires correct assembly, suitable power, and careful control of the movement range.

Mechanical Safety
  • Keep fingers, clothing, and loose objects away from moving joints and the gripper.
  • Place the robotic arm on a stable surface before operating it.
  • Do not force a joint beyond its mechanical movement range.
  • Avoid sudden or repeated movements that cause unnecessary mechanical stress.
  • Keep the arm clear of surrounding objects that could obstruct its movement.
Electrical Safety
  • Use the recommended regulated 5 V DC, 4 A power supply.
  • Do not power all six servos through the Arduino USB connection or Arduino 5 V pin.
  • Check voltage and polarity before connecting the supply.
  • Disconnect power before changing servo connections or inspecting electrical wiring.
  • Do not operate the system with damaged cables or loose electrical connections.
Operating Safety
  • Do not exceed the permitted payload for the selected arm configuration.
  • Test new movement commands without an object before performing a pick-and-place operation.
  • Keep the gripper load within the mechanical limits.
  • Stop operation if a servo becomes unusually hot, makes persistent buzzing sounds, or cannot reach its commanded position.
  • Do not leave the arm operating unattended during initial testing or while testing new movement sequences.

17. Frequently Asked Questions

What Is the TINKERKIT T050000?

The TINKERKIT T050000 is an Arduino-compatible robotic-arm kit that includes a six-servo mechanical arm, a control shield, a power supply, and the required assembly accessories. It is designed for learning robotics and programming.

Does the T050000 Kit Include an Arduino Board?

No. The kit includes an Arduino-compatible shield, but the Arduino controller board is not included. A compatible board must be purchased separately.

How Many Servo Motors Does the T050000 Use?

The robotic arm uses six servo motors: four SR431 servos and two SR311 servos.

What Is the Function of the Arduino R3 Shield?

The shield connects the six servo motors to the Arduino controller. It provides dedicated servo connections and simplifies the wiring and control of the robotic arm.

What Power Supply Does the T050000 Require?

The manufacturer recommends a regulated 5 V DC, 4 A power supply connected through the shield’s power jack. The kit’s official product information lists this supply as included.

Can I Power the Robotic Arm Directly from Arduino USB?

The complete robotic arm should not be powered through the Arduino USB connection. Six servo motors can draw more current than a typical USB-powered Arduino arrangement can safely provide. Use the recommended external power supply.

How Many Degrees of Freedom Does the Robotic Arm Have?

The robotic arm has six servo-controlled movements: base rotation, shoulder movement, elbow movement, wrist vertical movement, wrist rotation, and gripper movement.

Which Arduino Pins Control the Six Servos?

The standard Braccio shield pin mapping is:

  • M1 – D11.
  • M2 – D10.
  • M3 – D9.
  • M4 – D6.
  • M5 – D5.
  • M6 – D3.
What Is the Maximum Payload of the T050000?

The manufacturer’s specifications state a maximum load of 150 g at an operating distance of 32 cm and up to 400 g in the minimum Braccio configuration. The permissible load depends on the mechanical configuration and operating distance.

What Is the Difference Between the SR431 and SR311 Servos?

The SR431 provides higher torque than the SR311. Its specified torque is 12.2 kg·cm at 4.8 V and 14.5 kg·cm at 6 V, while the SR311 provides 3.1 kg·cm at 4.8 V and 3.8 kg·cm at 6 V.

Which Arduino Library Is Used to Control the Robotic Arm?

The Braccio library is used to initialize and control the robotic arm. It provides functions such as Braccio.begin() and Braccio.ServoMovement().

Can the T050000 Pick Up and Move Objects?

Yes. The robotic arm can perform basic pick-and-place operations by coordinating its joints and gripper. The object must be within the arm’s working area and within the permitted payload for the selected configuration.

Can I Add Sensors to the Robotic Arm?

Yes. Additional sensors can be integrated using available Arduino pins. The design must account for the shield’s existing pin assignments, voltage requirements, and possible timer or peripheral conflicts.

Can I Control the Robotic Arm Wirelessly?

Yes. A compatible wireless communication module can be added to receive movement commands. The program must interpret the received commands and convert them into safe servo positions.

What Should I Do if One of the Servos Does Not Move?

Check the servo connector, cable, shield output, power supply, and movement command. Also verify that the requested position is within the permitted range and that the mechanical joint is not blocked.

18. Conclusion

The TINKERKIT T050000 Arduino R3 Shield, TinkerKit Arm Robotics Kit is a practical platform for learning robotics, servo control, and embedded programming. Its six servo motors provide six controlled movements, allowing the robotic arm to rotate, raise and lower its sections, adjust its wrist, and operate its gripper.

The included Arduino-compatible shield simplifies the electrical connections, while the Braccio library makes it easier to control the arm using Arduino code. These features allow beginners and experienced users to experiment with movement sequences, object handling, sensor integration, and basic automation.

To operate the robotic arm reliably, assemble the mechanical structure correctly, use the recommended regulated power supply, understand the servo pin mapping, and keep all movement commands within the permitted joint ranges. It is also important to respect the payload limits because the torque required by the arm increases as the load moves farther from its supporting joints.

Once these fundamentals are understood, the T050000 provides a useful starting point for exploring more advanced robotics concepts, including pick-and-place operations, kinematics, remote control, and sensor-based automation.

 

مدة القراءة: 20 دقيقة.

1. المقدمة

تُعد مجموعة TINKERKIT T050000 Arduino، التي تتضمن درع التوصيل Arduino R3 ومجموعة الذراع الروبوتية TinkerKit، منصة تعليمية متكاملة تتيح للمستخدمين تجميع ذراع روبوتية متعددة المفاصل وبرمجتها وإجراء التجارب عليها. تجمع هذه المجموعة بين هيكل ميكانيكي وستة محركات سيرفو ودرع تحكم متوافق مع Arduino، لتوفير بيئة عملية لتعلم الروبوتات والتحكم في الحركة والبرمجة المضمنة.

الذراع الروبوتية TINKERKIT T050000

تُعرف هذه الذراع الروبوتية باسم Braccio، ويمكنها تنفيذ مجموعة متنوعة من الحركات، مثل تدوير القاعدة ورفع أجزاء الذراع وخفضها وتغيير اتجاه المعصم وفتح الماسك وإغلاقه. وتتيح هذه الحركات التقاط الأجسام الخفيفة ونقلها ووضعها في مواقع مختلفة.

يوفر درع التحكم المرفق نقاط توصيل مخصصة لمحركات السيرفو الستة، وهو مصمم للعمل مع لوحة Arduino متوافقة باستخدام مكتبة Braccio البرمجية. وبذلك يمكن التحكم في حركة الذراع من خلال أوامر برمجية، دون الحاجة إلى تصميم دائرة تحكم منفصلة لكل محرك.

تناسب هذه المجموعة الطلاب وهواة الإلكترونيات والمهتمين بالروبوتات والمهندسين الراغبين في استكشاف الحركة الميكانيكية والتحكم بمحركات السيرفو والبرمجة والتشغيل الأساسي للأذرع الروبوتية.

سنتعرف في هذا الدليل على مجموعة T050000 ومكوناتها وهيكلها الميكانيكي ومحركات السيرفو وتوصيلات درع التحكم والمتطلبات الكهربائية وطرق التجميع والبرمجة. كما سنتناول أمثلة عملية لأكواد Arduino ومفاهيم الحركة والتطبيقات العملية وطرق استكشاف الأخطاء وإصلاحها وتوصيات الصيانة وإرشادات السلامة المهمة.

2. ما هي الذراع الروبوتية TINKERKIT T050000؟

تُعد TINKERKIT T050000 مجموعة متكاملة لبناء ذراع روبوتية، حيث تجمع بين هيكل ميكانيكي متعدد المفاصل وستة محركات سيرفو ودرع تحكم متوافق مع Arduino.

الذراع الروبوتية TINKERKIT T050000

صُممت هذه المجموعة ليتم تجميعها والتحكم بها باستخدام لوحة Arduino متوافقة. ويتولى كل محرك سيرفو تحريك جزء محدد من الهيكل الميكانيكي، مما يسمح لوحدة التحكم بتغيير اتجاه الذراع وتشغيل آلية الماسك.

يسهّل درع التحكم المرفق عملية التوصيل الكهربائي بين محركات السيرفو ولوحة Arduino. فبدلاً من توصيل أسلاك الإشارة الخاصة بالمحركات الستة بشكل منفصل إلى دوائر قيادة مستقلة، يمكن توصيل كل محرك بمنفذ التحكم المخصص له على الدرع.

تأتي المجموعة مزودة بالأجزاء الميكانيكية ومحركات السيرفو ودرع التحكم ومصدر الطاقة وملحقات التجميع. ومع ذلك، فإن لوحة Arduino المسؤولة عن تشغيل البرنامج والتحكم في الذراع غير مرفقة، ويجب شراؤها بشكل منفصل.

الميزات الرئيسية

تتضمن مجموعة الذراع الروبوتية T050000 مجموعة من الميزات المهمة، أبرزها:

  • ستة محركات سيرفو للتحكم في مفاصل الذراع وآلية الماسك.
  • هيكل ميكانيكي متعدد المفاصل مزود بآلية للإمساك بالأجسام.
  • درع تحكم متوافق مع Arduino لتوصيل محركات السيرفو والتحكم بها.
  • تصميم معياري يسمح بتجميع الهيكل في تكوينات مختلفة.
  • مكتبة برمجية مخصصة للتحكم في الذراع باستخدام أكواد Arduino.
  • مصدر طاقة خارجي منظم ومرفق مع المجموعة.
  • إمكانية تنفيذ تجارب روبوتية تتعلق بمناولة الأجسام والتحكم في الحركة وتحديد المواقع.
ما الحركات التي يمكن للذراع الروبوتية تنفيذها؟

يمكن للذراع الروبوتية تنفيذ مجموعة من الحركات الأساسية، تشمل:

  • تدوير القاعدة لتغيير الاتجاه الذي تواجهه الذراع.
  • رفع جزء الكتف الرئيسي أو خفضه.
  • تحريك مفصل الكوع لتمديد الذراع أو ثنيها.
  • تغيير زاوية المعصم في الاتجاه الرأسي.
  • تدوير المعصم لتغيير اتجاه الماسك.
  • فتح الماسك وإغلاقه للإمساك بالأجسام أو تحريرها.

من خلال الجمع بين هذه الحركات، تستطيع الذراع الوصول إلى مواقع مختلفة ضمن نطاق عملها. ويعتمد مدى الوصول الفعلي والحمولة التي يمكن حملها على تكوين الذراع والوزن الميكانيكي الواقع عليها.

3. مكونات مجموعة TINKERKIT T050000

تتضمن مجموعة TINKERKIT T050000 الأجزاء الميكانيكية ومحركات السيرفو ودرع التحكم ومصدر الطاقة وملحقات التجميع اللازمة لبناء الذراع الروبوتية Braccio.

تعمل هذه المكونات معًا لتوفير منصة عملية متكاملة تتيح إجراء التجارب المتعلقة بالحركة الروبوتية والتحكم باستخدام Arduino.

مكونات مجموعة TINKERKIT T050000

يوضح الجدول التالي المكونات المرفقة مع المجموعة وفقًا لقائمة المنتجات المنشورة على موقع Makers Electronics.

عرض مجموعة الذراع الروبوتية TINKERKIT T050000 مع درع Arduino R3

المكونات المرفقة مع المجموعة
المكون الكمية الوصف
الأجزاء الهيكلية البلاستيكية 21 تُستخدم لتشكيل القاعدة والوصلات والمفاصل والمعصم والماسك.
البراغي 63 تُستخدم لتثبيت الأجزاء الميكانيكية وربط أقسام الذراع المختلفة.
الوردات المسطحة 16 تساعد على توزيع ضغط التثبيت وتحسين استقرار الوصلات الميكانيكية.
الصواميل السداسية 7 تُستخدم لتثبيت البراغي والمكونات الميكانيكية المتوافقة.
النوابض 2 توفر عناصر الإرجاع المرنة المطلوبة في التجميع الميكانيكي للذراع.
محركات السيرفو SR311 2 توفر الحركة المتحكم بها للآليات التي تتطلب عزم دوران أقل.
محركات السيرفو SR431 4 توفر عزم دوران أعلى للمفاصل الرئيسية للذراع.
درع التحكم المتوافق مع Arduino (Braccio Shield V4) 1 يربط محركات السيرفو الستة بلوحة Arduino متوافقة.
مصدر طاقة 5 V، 4 A 1 يوفر الطاقة الخارجية للذراع الروبوتية من خلال مدخل الطاقة الموجود على الدرع.
مفك براغي فيليبس 1 يساعد على تجميع الهيكل الميكانيكي باستخدام البراغي المرفقة.
غلاف حلزوني لحماية الكابلات 1 يُستخدم لتنظيم أسلاك السيرفو وحمايتها على امتداد الذراع الروبوتية.
الأجزاء الهيكلية الميكانيكية ومثبتات التجميع

تشكل الأجزاء الهيكلية البلاستيكية البالغ عددها 21 جزءًا الجسم الميكانيكي للذراع الروبوتية Braccio. وتشمل المكونات اللازمة لبناء القاعدة وأجزاء الذراع ودعامات المفاصل وأجزاء المعصم وآلية الإمساك بالأجسام.

تُستخدم البراغي والوردات والصواميل السداسية المرفقة لتثبيت هذه الأجزاء وربطها ببعضها. ويُعد تركيبها في مواضعها الصحيحة وشدها بصورة مناسبة أمرًا مهمًا، لأن ارتخاء الوصلات أو عدم محاذاة الأجزاء قد يؤثر في دقة الحركة ويزيد المقاومة الميكانيكية.

تتضمن المجموعة أيضًا نابضين يُستخدمان ضمن التجميع الميكانيكي للذراع. ويجب تركيب كل منهما وفقًا لتعليمات التجميع الخاصة بالمجموعة.

محركات السيرفو

تحتوي المجموعة على ستة محركات سيرفو من طرازين مختلفين:

  • أربعة محركات SR431: توفر عزم دوران أعلى، ولذلك تُستخدم في حركات الذراع الأكثر احتياجًا إلى القوة.
  • محركان SR311: يوفران عزم دوران أقل، ويُستخدمان في الآليات المتبقية التي تتطلب خصائص تشغيل مختلفة.

يتحكم كل محرك في حركة محددة من خلال إشارة التحكم التي يستقبلها من درع Braccio.

درع Braccio ومصدر الطاقة

يوفر درع Braccio V4 واجهة التوصيل الكهربائية بين محركات السيرفو ولوحة Arduino المتوافقة. ويحتوي على منافذ مخصصة لتوصيل المحركات ومدخل طاقة لتشغيل الذراع الروبوتية.

كما تتضمن المجموعة مصدر طاقة خارجيًا منظمًا بجهد 5 V وتيار 4 A، لتوفير الطاقة اللازمة لدرع التحكم ونظام محركات السيرفو.

ملاحظة مهمة: لا تتضمن المجموعة نفسها لوحة Arduino المسؤولة عن تنفيذ البرنامج والتحكم في الذراع. لذلك يجب الحصول على لوحة متوافقة بشكل منفصل حتى تتمكن من برمجة الذراع وتشغيلها.

ملحقات التجميع

تتضمن المجموعة أيضًا مفك براغي من نوع Phillips لتسهيل تجميع الأجزاء الميكانيكية، بالإضافة إلى غلاف حلزوني لحماية الكابلات وتنظيم أسلاك محركات السيرفو.

تساعد هذه الملحقات على تبسيط عملية التجميع وتحسين تنظيم الأسلاك، مما يقلل احتمالية تشابكها أو تعرضها للشد أثناء حركة الذراع الروبوتية.

4. المكونات الرئيسية المرفقة مع المجموعة

تحتوي مجموعة T050000 على المكونات الميكانيكية والإلكترونية اللازمة لتجميع الذراع الروبوتية وتشغيلها، باستثناء لوحة التحكم Arduino.

المكونات الرئيسية لمجموعة TINKERKIT T050000

قائمة المكونات المرفقة مع المجموعة

وفقًا للمعلومات المنشورة من الشركة المصنعة، تتضمن المجموعة المكونات التالية:

المكون الكمية
الأجزاء الميكانيكية البلاستيكية 21
البراغي 63
الوردات المسطحة 16
الصواميل السداسية 7
النوابض 2
محركات السيرفو SR311 2
محركات السيرفو SR431 4
درع تحكم متوافق مع Arduino للذراع الروبوتية 1
مصدر طاقة منظم 5 V، 4 A 1
مفك براغي فيليبس 1
غلاف حلزوني لحماية الكابلات 1
الأجزاء الميكانيكية

تشكل الأجزاء الميكانيكية الهيكل الأساسي للذراع الروبوتية، وتشمل القاعدة وأجزاء الذراع ودعامات المفاصل ومكونات المعصم وآلية الماسك.

تُربط الأجزاء الهيكلية البلاستيكية باستخدام البراغي والوردات والصواميل. ويُعد التجميع الصحيح أمرًا ضروريًا، لأن ارتخاء المفاصل أو عدم محاذاتها قد يؤثر في دقة الحركة ويزيد الحمل الواقع على محركات السيرفو.

أما النوابض المرفقة، فتُستخدم ضمن التجميع الميكانيكي وفقًا لتعليمات تركيب المجموعة.

محركات السيرفو

تستخدم المجموعة ستة محركات سيرفو لتوفير الحركة والتحكم في المفاصل المختلفة:

  • توفر أربعة محركات SR431 عزم الدوران الأعلى الذي تحتاج إليه المفاصل الرئيسية للذراع.
  • يُستخدم محركان SR311 للتحكم في الحركات المتبقية، بما في ذلك بعض وظائف المعصم والماسك.

يستقبل كل محرك إشارة تحكم من الدرع، ثم يدير عمود الخرج الخاص به للوصول إلى زاوية الحركة المطلوبة.

درع التحكم المتوافق مع Arduino ومصدر الطاقة

يربط درع التحكم الخاص بالذراع محركات السيرفو الستة بوحدة التحكم المتوافقة مع Arduino. كما يوفر منافذ مخصصة للمحركات ومسارات لإشارات التحكم ومدخلًا لتوصيل مصدر الطاقة الخارجي.

وتتضمن المجموعة مصدر طاقة منظمًا بجهد 5 V وتيار 4 A، وهو مخصص لتغذية الذراع من خلال مدخل الطاقة الموجود على درع التحكم.

5. الهيكل الميكانيكي ودرجات الحرية الست

تتكون الذراع الروبوتية T050000 من مجموعة من الأجزاء الميكانيكية المتصلة ببعضها، حيث يتحرك كل جزء من خلال مفصل يتم التحكم فيه بواسطة محرك سيرفو، مما يسمح للذراع بتغيير موضعها واتجاهها.

توفر محركات السيرفو الستة ست حركات مستقلة يتم التحكم فيها، ويُشار إليها عادةً باسم ست درجات من الحرية (6-DOF).

الهيكل الميكانيكي للذراع الروبوتية ودرجات الحرية الست

التعرف على الحركات الست
المحرك الحركة الوظيفة
M1 تدوير القاعدة تدوير الذراع بالكامل في الاتجاه الأفقي.
M2 حركة الكتف رفع الجزء الرئيسي من الذراع أو خفضه.
M3 حركة الكوع ثني الذراع أو تمديدها.
M4 الحركة الرأسية للمعصم تغيير زاوية المعصم في الاتجاه الرأسي.
M5 تدوير المعصم تدوير المعصم حول محوره.
M6 حركة الماسك فتح آلية الإمساك بالأجسام أو إغلاقها.

تعمل هذه الحركات معًا لتحديد موضع الماسك وتغيير اتجاهه بما يتناسب مع الجسم المراد التقاطه أو نقله.

القاعدة والكتف والكوع

تمثل القاعدة الجزء السفلي من الذراع الروبوتية، وهي المسؤولة عن دعم الهيكل بالكامل وتوفير إمكانية تدويره أفقيًا. وتساعد هذه الحركة على الوصول إلى أجسام موجودة في مواقع مختلفة حول قاعدة الذراع.

أما مفصل الكتف، فيتحكم في رفع الجزء الرئيسي من الذراع أو خفضه، بينما يغير مفصل الكوع الزاوية بين أجزاء الذراع المتصلة به. وتُعد هذه المفاصل مهمة بشكل خاص لأنها تتحمل وزن الهيكل الميكانيكي، بالإضافة إلى وزن أي جسم يحمله الماسك.

المعصم والماسك

تتحكم الحركة الرأسية للمعصم في تغيير زاوية الجزء الطرفي من الذراع، بينما يسمح محرك تدوير المعصم بتغيير اتجاه الماسك.

أما محرك السيرفو الخاص بالماسك، فيتحكم في عملية الفتح والإغلاق، مما يسمح للذراع بالإمساك بالأجسام الخفيفة وإطلاقها في الموقع المطلوب.

ما أهمية درجات الحرية الست؟

تتيح درجات الحرية الست للذراع الروبوتية التحكم في موضع أداة التنفيذ النهائية (End Effector) واتجاهها ضمن نطاق العمل الميكانيكي المتاح.

على سبيل المثال، يمكن للذراع الاقتراب من جسم معين من اتجاه محدد، ثم تعديل اتجاه الماسك ليتناسب مع وضع الجسم، وبعد ذلك إغلاق الماسك للإمساك به.

ومع ذلك، فإن وجود ست درجات من الحرية لا يعني أن الذراع تستطيع الوصول إلى جميع المواضع أو الاتجاهات الممكنة. إذ تظل حركتها مقيدة بنطاقات حركة المفاصل الميكانيكية وأبعاد الذراع وقدرات محركات السيرفو، بالإضافة إلى احتمالية حدوث تداخل ميكانيكي بين الأجزاء المتحركة.

6. المواصفات الفنية وخصائص محركات السيرفو

توضح المواصفات الفنية الأبعاد الميكانيكية وقدرة حمل الأوزان وخصائص محركات السيرفو والمتطلبات الكهربائية الخاصة بمجموعة الذراع الروبوتية. ومن المهم مراعاة هذه المواصفات قبل تجميع الذراع أو تصميم تطبيق عملي باستخدامها.

المواصفات الفنية للذراع الروبوتية TINKERKIT T050000

المواصفات العامة للمجموعة
المواصفة القيمة
رمز المنتج T050000
نوع الذراع الروبوتية ذراع روبوتية مزودة بستة محركات سيرفو
عدد الأجزاء الميكانيكية 21
محركات السيرفو 2 × SR311 و4 × SR431
وحدة التحكم المتوافقة لوحة Arduino بتصميم منافذ R3
درع التحكم درع تحكم متوافق مع Arduino ومخصص للذراع الروبوتية
مصدر الطاقة الموصى به 5 V DC منظم، 4 A
الوزن بعد التجميع 792 g
أقصى مسافة تشغيل 80 cm
أقصى ارتفاع 52 cm
عرض القاعدة 14 cm
عرض الماسك 90 mm
طول الكابل 40 cm
أقصى حمولة عند مسافة تشغيل 32 cm 150 g
أقصى حمولة في أقل تكوين ممتد للذراع Braccio 400 g
فهم مواصفات الحمولة (Payload)

تشير الحمولة (Payload) إلى أقصى وزن يمكن للذراع الروبوتية حمله في ظل ظروف ميكانيكية محددة.

بالنسبة إلى مجموعة T050000، تبلغ الحمولة القصوى المحددة 150 g عند مسافة تشغيل تبلغ 32 cm، ويمكن أن تصل إلى 400 g عند استخدام الذراع في أقل تكوين Braccio امتدادًا.

يرجع هذا الاختلاف إلى أن عزم الدوران المطلوب عند المفصل يزداد كلما زادت المسافة بين المفصل والحمل.

على سبيل المثال، يتطلب حمل جسم وزنه 150 g بالقرب من قاعدة الذراع عزم دوران أقل عمومًا مقارنة بحمل الجسم نفسه عند نهاية ذراع ممتدة بالكامل.

لذلك، يجب تقييم مواصفات الحمولة بالاقتران مع تكوين الذراع ومسافة التشغيل، وعدم اعتبارها حدًا ثابتًا يصلح لجميع أوضاع التشغيل.

7. التعرف على محركات السيرفو SR431 وSR311

تُعد محركات السيرفو عناصر التشغيل الأساسية المسؤولة عن حركة الذراع الروبوتية T050000. حيث يحول كل محرك إشارة التحكم الكهربائية إلى حركة دورانية ميكانيكية يمكن التحكم في موضعها.

تستخدم المجموعة طرازين مختلفين من محركات السيرفو، يتميز كل منهما بخصائص مختلفة من حيث عزم الدوران والسرعة.

محركات السيرفو SR431 وSR311 المستخدمة في الذراع الروبوتية

المواصفات الفنية لمحرك السيرفو SR431

تتضمن المجموعة أربعة محركات سيرفو من طراز SR431. وتوفر هذه المحركات عزم الدوران الأعلى المطلوب لتشغيل المفاصل الرئيسية للذراع الروبوتية.

المواصفة عند 4.8 V عند 6.0 V
عزم الدوران 12.2 kg·cm 14.5 kg·cm
السرعة 0.20 s/60° 0.18 s/60°

المواصفات الإضافية لمحرك SR431:

  • إشارة التحكم: PWM تناظرية.
  • مدى الدوران: 180°.
  • مادة التروس: المعدن.
  • نظام المحامل: محملان مزدوجان.
  • الوزن: 62 g.
  • الأبعاد: 42 × 20.5 × 39.5 mm.
  • نوع الموصل: موصل سيرفو من النوع J.
المواصفات الفنية لمحرك السيرفو SR311

تتضمن المجموعة محركين من طراز SR311، ويُستخدمان للتحكم في حركات الذراع المتبقية التي تتطلب خصائص عزم وسرعة مختلفة.

المواصفة عند 4.8 V عند 6.0 V
عزم الدوران 3.1 kg·cm 3.8 kg·cm
السرعة 0.14 s/60° 0.12 s/60°

المواصفات الإضافية لمحرك SR311:

  • إشارة التحكم: PWM تناظرية.
  • مدى الدوران: 180°.
  • مادة التروس: المعدن.
  • نظام المحامل: محملان مزدوجان.
  • الوزن: 27 g.
  • الأبعاد: 31.3 × 16.5 × 28.6 mm.
  • نوع الموصل: موصل سيرفو من النوع J.
لماذا تستخدم الذراع نوعين مختلفين من محركات السيرفو؟

تتحمل المفاصل الرئيسية للذراع وزن الهيكل الميكانيكي بالإضافة إلى وزن الجسم الذي يتم حمله. ولذلك تحتاج هذه المفاصل عادةً إلى عزم دوران أكبر مقارنة بآليات المعصم والماسك الأصغر حجمًا.

توفر محركات SR431 عزم دوران أعلى، مما يجعلها مناسبة للحركات الأكثر احتياجًا إلى القوة في الذراع. أما محركات SR311 فتتميز بعزم دوران أقل، وتُستخدم في الحركات التي تتطلب خصائص ميكانيكية مختلفة.

يساعد استخدام نوعين من محركات السيرفو على تحقيق التوازن بين القوة الميكانيكية المطلوبة والتصميم العملي للذراع الروبوتية.

فهم عزم الدوران وسرعة محركات السيرفو

يعبر عزم الدوران (Torque) عن قوة الدوران التي ينتجها محرك السيرفو حول عمود الخرج الخاص به. ويُقاس عادةً بوحدة كيلوجرام-سنتيمتر (kg·cm).

على سبيل المثال، عندما يكون عزم دوران محرك السيرفو 12.2 kg·cm عند جهد محدد، فهذا يعني أن المحرك يوفر عزمًا اسميًا يعادل تقريبًا تأثير قوة مقدارها 12.2 kgf عند ذراع رافعة طوله 1 cm، وذلك وفقًا لظروف الاختبار المحددة من الشركة المصنعة.

يعتمد عزم الدوران المطلوب عند مفصل الذراع الروبوتية على عدة عوامل، منها:

  • وزن أجزاء الذراع التي يتحملها المفصل.
  • وزن الجسم الذي يتم حمله.
  • المسافة بين المفصل والحمل.
  • اتجاه الذراع ووضعيتها أثناء الحركة.
  • الاحتكاك الميكانيكي والتسارع.
  • هامش الأمان المطلوب أثناء التشغيل.

أما سرعة محرك السيرفو، فتُعبّر عنها عادةً بالثواني اللازمة لقطع زاوية مقدارها 60 درجة. فعلى سبيل المثال، عندما تكون سرعة محرك SR431 هي 0.20 s/60° عند جهد 4.8 V، فهذا يعني أن المحرك يحتاج إلى نحو 0.20 ثانية للتحرك بزاوية 60 درجة، وفقًا لظروف الاختبار المحددة من الشركة المصنعة.

تعتمد مدة الحركة الفعلية على الحمل الميكانيكي وجهد التغذية والاحتكاك ونظام التحكم. لذلك قد يتحرك محرك السيرفو ببطء أكبر عند تعرضه لحمل ثقيل مقارنةً بتشغيله دون حمل.

نطاق تشغيل محركات السيرفو

تشير مواصفات محركي SR431 وSR311 إلى أن نطاق الدوران الاسمي يبلغ 180 درجة.

ومع ذلك، فإن نطاق الحركة الفعلي لكل مفصل بعد تجميع الذراع يكون مقيدًا أيضًا بالهيكل الميكانيكي وحدود الحركة المحددة في مكتبة Braccio.

يجب عدم إرسال أوامر إلى محرك السيرفو تتجاوز نطاق الحركة المسموح به في التجميع الميكانيكي. فقد يؤدي ذلك إلى اصطدام أجزاء الذراع بنقاط التوقف الميكانيكية، وزيادة استهلاك التيار، وإلحاق الضرر بالتروس أو المحرك.

8. درع Arduino R3 والتوصيلات وتوزيع المنافذ

يعمل درع التحكم المتوافق مع Arduino بوصفه الواجهة الإلكترونية التي تربط لوحة التحكم بمحركات السيرفو الستة.

وقد صُمم ليُركب مباشرة على لوحة Arduino متوافقة، كما يوفر منافذ مخصصة لتوصيل محركات الذراع الروبوتية والتحكم بها.

درع التحكم Arduino R3 الخاص بالذراع الروبوتية

الوظائف الرئيسية لدرع التحكم

ينفذ درع التحكم مجموعة من الوظائف الأساسية، تشمل:

  • توفير منافذ إشارات التحكم لمحركات السيرفو الستة.
  • نقل إشارات التحكم من لوحة Arduino إلى محركات السيرفو المقابلة.
  • توفير مدخل لتوصيل مصدر الطاقة الخاص بالذراع الروبوتية.
  • تبسيط ترتيب التوصيلات الكهربائية وتقليل تعقيد الأسلاك.
  • إتاحة التحكم في الذراع من خلال مكتبة Braccio البرمجية باستخدام لوحة Arduino.

من المهم معرفة أن درع التحكم لا يحل محل لوحة Arduino، بل يعمل معها.

تظل لوحة Arduino مسؤولة عن تنفيذ البرنامج وتوليد أوامر التحكم المستخدمة في تحريك محركات السيرفو.

توزيع منافذ التحكم بمحركات السيرفو

يستخدم درع Braccio منافذ Arduino الرقمية التالية للتحكم في محركات السيرفو الستة:

منفذ Arduino المحرك الوظيفة
D11 M1 تدوير القاعدة.
D10 M2 حركة الكتف.
D9 M3 حركة الكوع.
D6 M4 الحركة الرأسية للمعصم.
D5 M5 تدوير المعصم.
D3 M6 فتح الماسك وإغلاقه.

تُستخدم تعيينات المنافذ هذه ضمن نظام التحكم الخاص بـ Braccio. لذلك، لا ينبغي تغييرها في البرنامج دون مراعاة التوصيلات الفعلية الموجودة على درع التحكم وإعدادات مكتبة Braccio.

توصيل درع التحكم بلوحة Arduino

يمكن تثبيت درع التحكم على لوحة Arduino باتباع الخطوات الأساسية التالية:

  1. ضع لوحة Arduino على سطح ثابت وغير موصل للكهرباء.
  2. قم بمحاذاة موصلات درع التحكم مع المنافذ المقابلة لها على لوحة Arduino R3.
  3. اضغط على الدرع برفق لتثبيته في مكانه، مع التأكد من دخول جميع الأرجل في المنافذ الصحيحة.
  4. تحقق من عدم وجود أي أرجل توصيل مثنية أو مركبة في مواضع غير صحيحة.
  5. لا توصل مصدر الطاقة الخاص بمحركات السيرفو إلا بعد فحص التجميع والتأكد من صحة جميع التوصيلات.

صُمم درع التحكم ليتوافق مع ترتيب منافذ التوصيل الخاص بلوحات Arduino المتوافقة مع معيار R3. لذلك، يجب التأكد من توافق اللوحة قبل إجراء عملية التوصيل.

9. مصدر الطاقة والمتطلبات الكهربائية

يُعد مصدر الطاقة أحد العناصر الأساسية في نظام الذراع الروبوتية T050000، حيث تعتمد كفاءة تشغيل الذراع واستقرار حركتها بشكل كبير على توفير تغذية كهربائية مناسبة.

يمكن لمحركات السيرفو الستة أن تستهلك تيارًا كهربائيًا مرتفعًا، خاصةً عند تحريك عدة مفاصل في الوقت نفسه أو عند استخدام الذراع لحمل أحد الأجسام.

توصي الشركة المصنعة بتغذية درع التحكم من خلال مدخل الطاقة المخصص (Power Jack)، باستخدام مصدر طاقة خارجي منظم بجهد 5 V DC وتيار 4 A. ووفقًا للمعلومات الرسمية للمنتج، تتضمن المجموعة مصدر طاقة مناسبًا لهذا الغرض.

مصدر الطاقة والتوصيلات الكهربائية للذراع الروبوتية T050000

لماذا تحتاج الذراع الروبوتية إلى مصدر طاقة خارجي؟

يحتوي كل محرك سيرفو على محرك تيار مستمر داخلي ودائرة إلكترونية للتحكم في الحركة. وعندما يتحرك المحرك أو يقاوم قوة خارجية، فإنه يسحب تيارًا كهربائيًا من مصدر الطاقة.

قد يزداد التيار المطلوب بشكل ملحوظ في الحالات التالية:

  • عند تحريك عدة محركات سيرفو في الوقت نفسه.
  • عند استخدام الذراع لحمل وزن أو حمل ميكانيكي.
  • عند زيادة الاحتكاك في أحد المفاصل.
  • عندما يقترب محرك السيرفو من نقطة التوقف الميكانيكية.
  • عندما يتعذر على المحرك الوصول إلى الموضع المطلوب بسبب وجود عائق ميكانيكي.

لذلك، لا يُعد الاعتماد على منفذ USB الخاص بلوحة Arduino لتغذية الذراع الروبوتية بالكامل خيارًا مناسبًا للتشغيل المعتاد، نظرًا إلى متطلبات التيار المرتفعة لمحركات السيرفو الستة.

كيفية توصيل مصدر الطاقة

يمكن تنفيذ التوصيلات الأساسية لنظام التغذية الكهربائية باتباع الخطوات التالية:

  1. وصل مصدر الطاقة الخارجي المنظم بجهد 5 V DC بمدخل الطاقة المخصص على درع التحكم.
  2. تأكد من أن جهد مصدر الطاقة وقطبيته يتوافقان مع المتطلبات المحددة لدرع التحكم.
  3. وصل لوحة Arduino بدرع التحكم باستخدام موصلات التوصيل المتوافقة.
  4. وصل محركات السيرفو بمنافذ المحركات المخصصة لها على الدرع.
  5. افحص جميع التوصيلات وتأكد من صحتها قبل تشغيل النظام.

لا تستخدم مصدر طاقة بجهد غير متحقق منه عند توصيله بدرع التحكم أو منافذ محركات السيرفو. فقد تؤدي القطبية المعكوسة أو زيادة الجهد عن القيمة المسموح بها إلى تلف المكونات الإلكترونية.

اعتبارات مصدر الطاقة والتيار الكهربائي
  • يوفر مصدر الطاقة الموصى به، بجهد 5 V وتيار 4 A، جهدًا منظمًا وقدرة تيار مناسبة لتكوين المجموعة المخصص له.
  • تشير قيمة التيار الاسمية لمصدر الطاقة إلى أقصى تيار يمكنه توفيره في ظل ظروف التشغيل المحددة.
  • لا يعني تصنيف التيار أن مصدر الطاقة يفرض هذه القيمة على الدائرة، بل يسحب النظام المتصل التيار الذي يحتاج إليه وفقًا لظروف تشغيله.
  • إذا كانت قدرة مصدر الطاقة غير كافية، فقد ينخفض جهد الخرج عند تحريك عدة محركات سيرفو أو عند حمل الذراع لجسم معين.
  • قد يؤدي انخفاض الجهد إلى حركات غير متوقعة أو إعادة تشغيل وحدة التحكم أو عدم استقرار أداء الذراع الروبوتية.

10. تجميع الذراع الروبوتية وإعداد برنامج Arduino

قبل البدء في برمجة الذراع الروبوتية، يجب تجميع هيكلها الميكانيكي وتثبيت درع التحكم وتجهيز بيئة تطوير Arduino. وتساعد هذه الخطوات على ضمان صحة التوصيلات واستقرار الحركة قبل تنفيذ الأوامر البرمجية.

تجميع الذراع الروبوتية وإعداد نظام Arduino

تجميع الهيكل الميكانيكي

تتضمن المجموعة الأجزاء الهيكلية البلاستيكية والبراغي والوردات والصواميل والنوابض ومفك البراغي اللازم لتجميع الذراع الروبوتية.

اتبع تعليمات التجميع الخاصة بالمجموعة لتحديد الموضع والاتجاه الصحيح لكل جزء قبل تثبيته.

أثناء عملية التجميع، يُنصح باتباع الخطوات التالية:

  1. حدد الأجزاء الميكانيكية المختلفة ورتبها قبل البدء في التجميع.
  2. قم بتجميع القاعدة وآلية محرك السيرفو الخاصة بها.
  3. ركب الأجزاء الرئيسية للذراع ومحركات السيرفو المخصصة لكل جزء.
  4. قم بتجميع آليتي المعصم والماسك.
  5. ثبت المكونات باستخدام البراغي والوردات والصواميل المرفقة.
  6. تحقق من أن المفاصل تتحرك بحرية دون وجود احتكاك ميكانيكي مفرط.
  7. مرر كابلات محركات السيرفو بعناية داخل أجزاء الذراع.
  8. استخدم الغلاف الحلزوني المخصص لحماية الكابلات وتنظيمها في المواضع المناسبة.
  9. تأكد من عدم انحشار الكابلات بين الأجزاء المتحركة أو تعرضها للشد أثناء حركة الذراع.

تُعد المحاذاة الميكانيكية الصحيحة من الأمور المهمة أثناء التجميع، لأن عدم محاذاة الأجزاء قد يزيد الاحتكاك ويضع أحمالًا إضافية على محركات السيرفو، كما قد يمنع الذراع من الوصول إلى المواضع المطلوبة بدقة.

توصيل محركات السيرفو

وصل كل محرك سيرفو بمنفذ المحرك المخصص له على درع التحكم، مع الالتزام بالملصقات التعريفية للمحركات وتوزيع المنافذ الموضح في القسم السابق.

تحقق من اتجاه موصلات التوصيل وتأكد من توصيل كل محرك بالمنفذ الصحيح قبل توصيل مصدر الطاقة وتشغيل النظام.

تثبيت بيئة تطوير Arduino IDE

تُستخدم بيئة تطوير Arduino IDE لكتابة البرامج البرمجية وتجميعها ورفعها إلى لوحة التحكم.

يمكن تجهيز بيئة التطوير باتباع الخطوات التالية:

  1. قم بتنزيل برنامج Arduino IDE وتثبيته على جهاز الكمبيوتر.
  2. وصل لوحة Arduino المتوافقة بالكمبيوتر باستخدام كابل USB.
  3. افتح برنامج Arduino IDE.
  4. حدد نوع لوحة Arduino الصحيح من قائمة اختيار اللوحات (Board Selection).
  5. حدد منفذ الاتصال المناسب (Port) الذي تتصل به اللوحة.
  6. ثبت مكتبة Braccio قبل محاولة تجميع برنامج التحكم في الذراع الروبوتية.
تثبيت مكتبة Braccio

توفر مكتبة Braccio مجموعة من الدوال البرمجية اللازمة لتهيئة الذراع الروبوتية والتحكم في حركتها. وتساعد هذه المكتبة على تنفيذ أوامر الحركة دون الحاجة إلى كتابة جميع تعليمات التحكم بمحركات السيرفو بصورة يدوية.

لتثبيت المكتبة، اتبع الخطوات التالية:

  1. افتح برنامج Arduino IDE.
  2. انتقل إلى مدير المكتبات (Library Manager).
  3. ابحث عن مكتبة Braccio باستخدام مربع البحث.
  4. حدد إدخال المكتبة المناسب.
  5. اضغط على خيار التثبيت (Install).
  6. أعد تشغيل بيئة التطوير أو تحديثها إذا لم تظهر المكتبة مباشرة بعد التثبيت.

بعد تثبيت المكتبة، أضف التعليمة التالية في بداية البرنامج لاستدعائها:

#include <Braccio.h>

تجدر الإشارة إلى أن طريقة عمل المكتبة والدوال المتاحة فيها قد تختلف باختلاف الإصدار المثبت. لذلك، يجب الرجوع إلى الوثائق البرمجية المطابقة للإصدار المستخدم في المشروع.

11. برمجة الذراع الروبوتية والتحكم في حركتها

تعمل مكتبة Braccio على تبسيط عملية التحكم في الذراع الروبوتية من خلال توفير مجموعة من الدوال البرمجية المسؤولة عن تهيئة النظام وإصدار أوامر الحركة لمحركات السيرفو الستة.

وبدلًا من إنشاء إشارات التحكم الخاصة بكل محرك سيرفو يدويًا، يمكن تحديد المواضع المطلوبة لمفاصل الذراع باستخدام أمر برمجي واحد للحركة.

برمجة والتحكم في الذراع الروبوتية TinkerKit Braccio باستخدام Arduino

تهيئة الذراع الروبوتية

تُستخدم دالة التهيئة التالية:

Braccio.begin();

تعمل هذه الدالة على تهيئة مكتبة Braccio وتجهيز الذراع الروبوتية، ثم تحريكها إلى مواضعها المرجعية الابتدائية وفقًا لإجراءات التهيئة المحددة في المكتبة.

يوضح الجدول التالي المواضع الابتدائية الموثقة لمحركات السيرفو:

المحرك الموضع الابتدائي الوظيفة
M1 90° القاعدة
M2 45° الكتف
M3 180° المرفق
M4 180° الحركة الرأسية للمعصم
M5 90° دوران المعصم
M6 10° الماسك

وفقًا لطريقة التحكم القياسية في مكتبة Braccio، تمثل الزاوية الابتدائية البالغة 10° للمحرك M6 وضعية فتح الماسك.

فهم دالة ServoMovement

تُعد الدالة التالية الدالة الرئيسية المسؤولة عن التحكم في حركة محركات السيرفو الستة:

Braccio.ServoMovement(stepDelay, M1, M2, M3, M4, M5, M6);

تتكون هذه الدالة من المعاملات التالية:

  • StepDelay: يحدد فترة التأخير بين خطوات الحركة، بوحدة المللي ثانية.
  • M1: زاوية الدوران المطلوبة للقاعدة.
  • M2: زاوية الحركة المطلوبة لمفصل الكتف.
  • M3: زاوية الحركة المطلوبة لمفصل المرفق.
  • M4: زاوية الحركة الرأسية المطلوبة للمعصم.
  • M5: زاوية الدوران المطلوبة للمعصم.
  • M6: الموضع المطلوب للماسك.

تتيح هذه الدالة لوحدة التحكم إصدار أوامر الحركة للمحركات الستة ضمن عملية تحكم واحدة، مما يسهل تنسيق حركة المفاصل المختلفة.

يتراوح نطاق التأخير الموثق للمعامل StepDelay بين 10 و30 مللي ثانية. وتؤثر القيمة المحددة في كيفية تقدم الحركة، ولكن لا ينبغي اعتبارها إعدادًا مباشرًا لسرعة محرك السيرفو.

حدود حركة محركات السيرفو

تحدد مكتبة Braccio نطاقات الحركة المسموح بها لكل محرك من محركات السيرفو الستة، كما يوضح الجدول التالي:

المحرك الوظيفة نطاق الحركة المسموح
M1 القاعدة 0–180°
M2 الكتف 15–165°
M3 المرفق 0–180°
M4 الحركة الرأسية للمعصم 0–180°
M5 دوران المعصم 0–180°
M6 الماسك 10–73°

تمثل هذه القيم حدود التحكم الموثقة في مكتبة Braccio. ومع ذلك، قد يعتمد نطاق الحركة الآمن فعليًا على طريقة التجميع، واحتمالية حدوث تداخل ميكانيكي، وطبيعة الجسم الذي تحمله الذراع.

بالنسبة إلى الماسك، تمثل الزاوية 10° وضعية الفتح، بينما تمثل الزاوية 73° وضعية الإغلاق، وفقًا لطريقة التحكم القياسية في المكتبة.

مثال برمجي أساسي لتحريك الذراع الروبوتية

يوضح المثال التالي كيفية تهيئة الذراع الروبوتية وتحريكها بين عدة مواضع باستخدام مكتبة Braccio.

#include <Braccio.h>

void setup() {
  // Initialize the robotic arm
  Braccio.begin();

  delay(1000);

  // Move to the first position
  Braccio.ServoMovement(20, 90, 45, 180, 180, 90, 10);

  delay(1000);

  // Move the arm to another position
  Braccio.ServoMovement(20, 90, 90, 90, 90, 90, 10);

  delay(1000);

  // Close the gripper
  Braccio.ServoMovement(20, 90, 90, 90, 90, 90, 73);

  delay(1000);

  // Return the gripper to the open position
  Braccio.ServoMovement(20, 90, 90, 90, 90, 90, 10);
}

void loop() {
  // No repeated movement in this example
}
شرح الكود البرمجي
  • #include <Braccio.h> تستدعي مكتبة Braccio وتتيح استخدام الدوال الخاصة بالتحكم في الذراع الروبوتية.
  • Braccio.begin(); تهيئ الذراع الروبوتية وتجهزها لبدء تنفيذ أوامر الحركة.
  • Braccio.ServoMovement() ترسل مواضع الحركة المطلوبة إلى محركات السيرفو الستة.
  • القيمة الأولى 20 تحدد فترة التأخير بين خطوات الحركة، بوحدة المللي ثانية.
  • المعاملات الستة المتبقية تحدد مواضع الحركة المستهدفة للمحركات من M1 إلى M6.
  • delay(1000); توقف تنفيذ البرنامج لمدة ثانية واحدة بين أوامر الحركة.

يعتمد هذا المثال على طريقة تحديد المواضع المعتمدة في مكتبة Braccio. وقبل تنفيذ أي تسلسل جديد للحركة، يجب التأكد من صحة تجميع الذراع وعدم تسبب زوايا الحركة المطلوبة في حدوث تصادم أو تداخل بين الأجزاء الميكانيكية.

التحكم في كل مفصل بصورة منفصلة

على الرغم من أن مكتبة Braccio تتيح التحكم في محركات السيرفو الستة من خلال استدعاء برمجي واحد، فإن فهم وظيفة كل مفصل على حدة يساعد على تطوير تسلسلات حركة أكثر تقدمًا.

يتحكم كل محرك في جزء مختلف من الذراع الروبوتية. ومن خلال تغيير زاوية محرك معين مع الإبقاء على قيم المحركات الأخرى دون تغيير، يمكن ملاحظة تأثيره المباشر في حركة الذراع.

التحكم في القاعدة

يتحكم المحرك M1 في دوران قاعدة الذراع الروبوتية، ويتصل بالمنفذ الرقمي D11 في لوحة Arduino. ويتراوح نطاق حركته الموثق بين 0 و180 درجة. ويؤدي تغيير زاويته إلى تدوير الذراع بالكامل في المستوى الأفقي.

على سبيل المثال:

Braccio.ServoMovement(20, 45, 45, 180, 180, 90, 10);

يطلب هذا الأمر تحريك القاعدة إلى زاوية 45 درجة، بينما تستقبل المفاصل الأخرى قيم المواضع المحددة لها في الأمر نفسه.

التحكم في الكتف

يتحكم المحرك M2 في حركة مفصل الكتف، ويتصل بالمنفذ الرقمي D10 في لوحة Arduino. ويتراوح نطاق حركته الموثق بين 15 و165 درجة.

تتمثل وظيفته في رفع الجزء الرئيسي من الذراع أو خفضه. ويؤثر تغيير زاوية الكتف في ارتفاع الماسك ومدى وصوله، كما يغير مقدار الحمل الواقع على محرك السيرفو المسؤول عن هذا المفصل.

التحكم في المرفق

يتحكم المحرك M3 في حركة مفصل المرفق، ويتصل بالمنفذ الرقمي D9 في لوحة Arduino. ويتراوح نطاق حركته الموثق بين 0 و180 درجة.

يعمل هذا المفصل على تغيير الزاوية بين أجزاء الذراع الرئيسية، ويؤدي دورًا مهمًا في مد الذراع أو طيها وضبط موضع الماسك.

التحكم في المعصم

يستخدم المعصم محركي سيرفو لتنفيذ حركتين مختلفتين:

  • M4 يتحكم في الحركة الرأسية للمعصم، ويتصل بالمنفذ الرقمي D6.
  • M5 يتحكم في دوران المعصم، ويتصل بالمنفذ الرقمي D5.

تساعد هاتان الحركتان على ضبط اتجاه الماسك، بحيث يمكنه الاقتراب من الجسم من زاوية مناسبة لالتقاطه.

التحكم في الماسك

يتحكم المحرك M6 في آلية فتح وإغلاق الماسك، ويتصل بالمنفذ الرقمي D3 في لوحة Arduino. ويتراوح نطاق حركته الموثق بين 10 و73 درجة.

  • 10 درجات: الماسك مفتوح.
  • 73 درجة: الماسك مغلق.

صُمم الماسك للإمساك بالأجسام خفيفة الوزن. لذلك، لا تحاول إجباره على الإغلاق حول جسم كبير جدًا أو ثقيل، لأن ذلك قد يؤدي إلى زيادة الحمل على محرك السيرفو أو إتلاف الأجزاء الميكانيكية.

إنشاء تسلسل حركة لالتقاط الأجسام ونقلها

تُعد عملية الالتقاط والنقل (Pick-and-Place) من أشهر التطبيقات التعليمية للذراع الروبوتية. وتعتمد هذه العملية على تحريك الذراع باتجاه جسم معين، وإغلاق الماسك للإمساك به، ثم رفعه ونقله إلى موضع آخر وإطلاقه هناك.

يمكن للذراع الروبوتية T050000 تنفيذ هذا النوع من العمليات باستخدام مجموعة متتابعة من أوامر تحديد مواضع محركات السيرفو.

تتضمن عملية الالتقاط والنقل الأساسية الخطوات التالية:

  1. تحريك الذراع باتجاه الجسم المراد التقاطه.
  2. وضع الماسك فوق الجسم أو حوله.
  3. فتح الماسك استعدادًا للإمساك بالجسم.
  4. خفض الذراع إلى موضع الالتقاط المناسب.
  5. إغلاق الماسك للإمساك بالجسم.
  6. رفع الذراع لحمل الجسم.
  7. تدوير الذراع أو تحريكها باتجاه الموضع المستهدف.
  8. خفض الجسم إلى الموضع المطلوب.
  9. فتح الماسك لتحرير الجسم.
  10. إعادة الذراع إلى موضع راحة مناسب.

تعتمد زوايا المفاصل المطلوبة لتنفيذ هذه العملية على الترتيب الميكانيكي الفعلي للذراع، وموقع الجسم، وأبعاد مساحة العمل المتاحة.

مثال برمجي لعملية الالتقاط والنقل (Pick-and-Place)

يوضح البرنامج التالي كيفية تنظيم تسلسل بسيط من أوامر الحركة لتنفيذ عملية التقاط جسم ونقله إلى موضع آخر. وتجدر الإشارة إلى أن زوايا المفاصل المستخدمة في هذا المثال توضيحية فقط، ويجب تعديلها واختبارها بما يتناسب مع التجميع الفعلي للذراع وموقع الجسم.

#include <Braccio.h>

void setup() {
  Braccio.begin();

  delay(1000);

  // Move above the object with the gripper open
  Braccio.ServoMovement(20, 90, 90, 90, 90, 90, 10);
  delay(1000);

  // Lower the arm toward the object
  Braccio.ServoMovement(20, 90, 110, 70, 90, 90, 10);
  delay(1000);

  // Close the gripper
  Braccio.ServoMovement(20, 90, 110, 70, 90, 90, 73);
  delay(1000);

  // Lift the object
  Braccio.ServoMovement(20, 90, 90, 100, 90, 90, 73);
  delay(1000);

  // Move toward the destination
  Braccio.ServoMovement(20, 140, 90, 100, 90, 90, 73);
  delay(1000);

  // Lower the object
  Braccio.ServoMovement(20, 140, 110, 70, 90, 90, 73);
  delay(1000);

  // Release the object
  Braccio.ServoMovement(20, 140, 110, 70, 90, 90, 10);
  delay(1000);

  // Move back to a resting position
  Braccio.ServoMovement(20, 90, 45, 180, 180, 90, 10);
}

void loop() {
}
ملاحظات مهمة حول المثال البرمجي

يوضح هذا المثال كيفية تنظيم أوامر الحركة لتنفيذ عملية الالتقاط والنقل، ولكنه ليس برنامجًا موحدًا يمكن استخدامه مع جميع أوضاع تجميع الذراع أو جميع الأجسام.

قبل استخدام البرنامج لالتقاط جسم فعلي، يجب مراعاة النقاط التالية:

  • تحقق من قدرة الذراع على الوصول إلى المواضع المطلوبة دون الاصطدام بالقاعدة أو الأجزاء المحيطة بها.
  • اختبر تسلسل الحركات دون حمل أي جسم أولًا.
  • استخدم جسمًا خفيف الوزن يتوافق مع حدود الحمولة المسموح بها للمجموعة.
  • عدّل زوايا المفاصل تدريجيًا لتجنب الحركات المفاجئة أو التداخل الميكانيكي.
  • تأكد من أن الماسك يغلق دون تطبيق قوة مفرطة على الجسم.
  • راقب محركات السيرفو للتأكد من عدم صدور أصوات طنين غير طبيعية أو ارتفاع درجة حرارتها أو ظهور حركات غير مستقرة.

يعتمد اختيار زوايا المفاصل المناسبة على الموقع الفعلي للجسم وتكوين الذراع الروبوتية. لذلك، قد لا يعمل تسلسل حركي بنجاح في إعداد معين عند استخدامه في إعداد مختلف.

12. فهم علم الحركة للذراع الروبوتية (Robotic Arm Kinematics)

يُعد علم الحركة (Kinematics) أحد فروع الميكانيكا التي تدرس حركة الأجسام دون التطرق مباشرةً إلى القوى المسببة لهذه الحركة. وفي مجال الروبوتات، يساعد هذا العلم على توضيح العلاقة بين زوايا المفاصل وموضع أداة التنفيذ النهائية (End Effector) واتجاهها.

في الذراع الروبوتية T050000، تمثل آلية الماسك أداة التنفيذ النهائية المسؤولة عن الإمساك بالأجسام والتعامل معها.

يساعد فهم المبادئ الأساسية لعلم الحركة على الانتقال من تحديد زوايا محركات السيرفو يدويًا إلى تطوير أساليب أكثر تنظيمًا ودقة للتحكم في حركة الذراع الروبوتية.

شرح علم الحركة للذراع الروبوتية Braccio

الحركة الأمامية (Forward Kinematics)

تُستخدم الحركة الأمامية لحساب موضع الماسك واتجاهه اعتمادًا على زوايا المفاصل المعروفة للذراع الروبوتية.

على سبيل المثال، عند معرفة زوايا القاعدة والكتف والمرفق، يمكن استخدام نموذج رياضي للحركة لتقدير موضع الماسك بالنسبة إلى قاعدة الذراع.

تعتمد هذه الحسابات على أطوال أجزاء الذراع وأبعادها الهندسية وطريقة اتصال المفاصل ببعضها.

في نموذج مبسط لذراع مستوية تتكون من رابطتين ميكانيكيتين، يمكن حساب إحداثيات نقطة النهاية باستخدام المعادلتين التاليتين:

\(x=L_1\cos(\theta_1)+L_2\cos(\theta_1+\theta_2)\)

\(y=L_1\sin(\theta_1)+L_2\sin(\theta_1+\theta_2)\)

حيث تمثل الرموز المستخدمة في المعادلتين ما يلي:

  • \(L_1\): طول الجزء الأول من الذراع.
  • \(L_2\): طول الجزء الثاني من الذراع.
  • \(\theta_1\): زاوية المفصل الأول.
  • \(\theta_2\): زاوية المفصل الثاني.
  • \(x\) و\(y\): الإحداثيان المحسوبان لموضع نقطة نهاية الذراع.

تصف هذه المعادلات نموذجًا مبسطًا لآلية مستوية تتكون من رابطتين فقط. أما ذراع Braccio الكاملة فتحتوي على مفاصل إضافية، ولذلك يتطلب إنشاء نموذج رياضي متكامل معرفة الأبعاد الهندسية الفعلية للذراع ونظام الإحداثيات المستخدم في الحسابات.

الحركة العكسية (Inverse Kinematics)

تعمل الحركة العكسية بطريقة معاكسة للحركة الأمامية؛ إذ تهدف إلى حساب زوايا المفاصل المطلوبة لوضع الماسك عند إحداثيات محددة وباتجاه معين.

على سبيل المثال، إذا أردنا تحريك الماسك إلى نقطة معينة، تحاول خوارزمية الحركة العكسية تحديد الزوايا المناسبة للقاعدة والكتف والمرفق والمعصم للوصول إلى ذلك الموضع.

تُعد الحركة العكسية أكثر تعقيدًا من الحركة الأمامية لعدة أسباب، منها:

  • قد يقع الموضع المطلوب خارج نطاق الوصول الفعلي للذراع الروبوتية.
  • قد توجد عدة تكوينات مختلفة للمفاصل تسمح بالوصول إلى الموضع نفسه.
  • قد تتسبب بعض أوضاع الحركة في حدوث تصادم بين الأجزاء الميكانيكية.
  • يجب أن تظل الزوايا المحسوبة ضمن نطاقات الحركة المسموح بها لكل مفصل.
  • يجب مراعاة اتجاه الماسك، وليس موضعه فقط.

توفر مكتبة Braccio أوامر مباشرة لتحديد مواضع مفاصل الذراع. ولكن هذا لا يعني أنها تحول تلقائيًا كل موضع ديكارتي مطلوب (Cartesian Position) إلى زوايا مناسبة لمحركات السيرفو.

نطاق العمل وإمكانية الوصول (Workspace and Reachability)

يشير نطاق العمل (Workspace) إلى المنطقة التي تستطيع الذراع الروبوتية الوصول إليها باستخدام الماسك.

يتحدد نطاق العمل وفقًا لمجموعة من العوامل، تشمل:

  • أطوال الأجزاء الميكانيكية المكونة للذراع.
  • نطاقات الزوايا المسموح بها لكل مفصل.
  • اتجاه القاعدة وإمكانية دورانها.
  • الأبعاد الميكانيكية للماسك.
  • احتمالية حدوث تداخل ميكانيكي بين أجزاء الذراع.
  • طبيعة البيئة المحيطة بالذراع والعوائق الموجودة فيها.

قد تقع نقطة معينة ضمن مدى الوصول النظري للذراع، ومع ذلك يتعذر الوصول إليها فعليًا إذا كانت زوايا المفاصل المطلوبة تتجاوز الحدود الميكانيكية أو حدود التحكم المحددة في البرنامج.

13. التطبيقات العملية وتخصيص الذراع الروبوتية

يمكن استخدام الذراع الروبوتية T050000 في العديد من المشروعات التعليمية والتجريبية المتعلقة بمناولة الأجسام والتحكم في الحركة والأنظمة الآلية. وتوفر محركات السيرفو الستة وسيلة عملية لفهم كيفية عمل عدة مفاصل معًا للتحكم في حركة آلية روبوتية متكاملة.

التطبيقات العملية وإمكانيات تخصيص الذراع الروبوتية TINKERKIT T050000

التقاط الأجسام ونقلها وفرزها (Pick-and-Place and Object Sorting)

يمكن برمجة الذراع الروبوتية لالتقاط الأجسام خفيفة الوزن ونقلها إلى مواقع مختلفة باستخدام سلسلة من أوامر الحركة المحددة مسبقًا.

يساعد هذا المشروع على تطبيق وفهم مجموعة من المفاهيم، منها:

  • تحديد مواضع محركات السيرفو.
  • تنظيم تسلسل الحركات.
  • التحكم في فتح الماسك وإغلاقه.
  • مبادئ الأتمتة الأساسية.
  • مراعاة الأحمال الميكانيكية أثناء التشغيل.

يمكن أيضًا استخدام الذراع في تنفيذ مشروع بسيط لفرز الأجسام. حيث توضع مجموعة من الأجسام داخل منطقة العمل، ثم تتولى الذراع نقل كل جسم إلى موقع محدد وفقًا لبرنامج مسبق أو استجابةً لإشارات مستشعر خارجي.

على سبيل المثال، يمكن لوحدة التحكم استخدام مستشعر لتحديد فئة الجسم، ثم تنفيذ تسلسل الحركة المناسب لنقله إلى الموقع المخصص له. ومع ذلك، يجب تطوير منطق الفرز ونظام التعرف على الأجسام بصورة منفصلة عن نظام التحكم الأساسي في الذراع.

تحديد موضع الكاميرا (Camera Positioning)

يمكن تثبيت كاميرا خفيفة الوزن أو وحدة تصوير متوافقة على الذراع الروبوتية أو في الجزء الطرفي منها، بشرط أن يكون أسلوب التثبيت والوزن الإضافي ضمن الحدود الميكانيكية المسموح بها.

يمكن الاستفادة من هذا التطبيق في تنفيذ تجارب ومشروعات مثل:

  • تجارب التحكم في موضع الكاميرا.
  • مراقبة الأجسام وفحصها بصريًا.
  • تحريك الكاميرا عن بُعد باستخدام الذراع الروبوتية.
  • تنفيذ تجارب أساسية في مجال الرؤية الآلية (Machine Vision).

يجب تثبيت الكاميرا أو وحدة التصوير بإحكام، كما ينبغي احتساب وزنها الإضافي عند تقدير الحمل الواقع على مفاصل الذراع ومحركات السيرفو.

ذراع روبوتية تعتمد على المستشعرات (Sensor-Based Robotic Arm)

يمكن دمج الذراع الروبوتية مع مجموعة من المستشعرات لإنشاء نظام قادر على الاستجابة للتغيرات والعناصر الموجودة في البيئة المحيطة.

تشمل الإضافات الممكنة:

  • مستشعرات المسافة بالموجات فوق الصوتية (Ultrasonic Sensors): لاكتشاف الأجسام القريبة وقياس المسافة إليها.
  • مستشعرات الأشعة تحت الحمراء (Infrared Sensors): لتنفيذ عمليات الكشف البسيط عن الأجسام.
  • مستشعرات الألوان (Color Sensors): للتعرف على ألوان الأجسام وتصنيفها.
  • مفاتيح تحديد الموضع (Limit Switches): لتوفير نقاط مرجعية خارجية للحركة.
  • الكاميرات (Cameras): لإجراء تجارب معالجة الصور وتحليل المشاهد.

تتطلب هذه المستشعرات توصيلات كهربائية مناسبة وبرمجة إضافية. ويمكن استخدام الإشارات الصادرة منها بواسطة لوحة Arduino لاختيار تسلسل الحركة المناسب وتنفيذه.

التحكم في الذراع الروبوتية عن بُعد (Remote-Controlled Robotic Arm)

يمكن إضافة واجهة للتحكم عن بُعد تتيح إرسال أوامر الحركة إلى الذراع الروبوتية من جهاز آخر.

تشمل طرق التحكم الممكنة:

  • الاتصال باستخدام تقنية Bluetooth.
  • استخدام وحدات الاتصال اللاسلكي.
  • إرسال أوامر تسلسلية (Serial Commands) من جهاز الكمبيوتر.
  • استخدام عصا تحكم (Joystick) أو واجهة تعتمد على مقاومات متغيرة (Potentiometers).

يجب دمج نظام الاتصال مع برنامج التحكم في الحركة، كما ينبغي تصميم البرنامج بحيث يتعامل بأمان مع الأوامر غير الصحيحة أو انقطاع الاتصال أثناء التشغيل.

المشروعات التعليمية في مجال الروبوتات

توفر مجموعة T050000 بيئة عملية لتعلم العديد من المفاهيم الأساسية والمتقدمة في مجال الروبوتات، ومن أهمها:

  • التحكم في محركات السيرفو.
  • البرمجة باستخدام Arduino.
  • التجميع الميكانيكي للأنظمة الروبوتية.
  • درجات الحرية (Degrees of Freedom).
  • الحركة الأمامية والحركة العكسية (Forward and Inverse Kinematics).
  • تنظيم تسلسل الحركات والتحكم فيها.
  • حسابات الحمولة وعزم الدوران.
  • دمج المستشعرات مع الأنظمة الروبوتية.
  • مبادئ الأتمتة الأساسية.
توسيع الذراع الروبوتية وتخصيصها

يتيح التصميم المعياري لمنصة Braccio استكشاف تكوينات ميكانيكية مختلفة وتجربة إضافة مكونات وملحقات جديدة. ومع ذلك، يجب أن يراعي أي تعديل يتم إجراؤه الأحمال الميكانيكية وعزم محركات السيرفو ومتطلبات التغذية الكهربائية وحدود الحركة المسموح بها.

قد يؤدي تغيير التكوين الميكانيكي للذراع إلى التأثير في مجموعة من الخصائص، تشمل:

  • المسافات بين المفاصل المختلفة.
  • أقصى موضع يمكن للذراع الوصول إليه.
  • ارتفاع الماسك عن سطح العمل.
  • مقدار الحمل الميكانيكي الواقع على كل محرك سيرفو.
  • الاستقرار العام للهيكل أثناء التشغيل.

ومن المهم الانتباه إلى أن زيادة مدى وصول الذراع قد تؤدي إلى انخفاض الحمولة التي يمكنها حملها بأمان، بسبب زيادة عزم الدوران المطلوب عند المفاصل.

يمكن توصيل مستشعرات خارجية بمنافذ Arduino المتاحة، بشرط ألا تكون هذه المنافذ مستخدمة بالفعل بواسطة درع التحكم أو أي وحدة طرفية أخرى.

قبل توصيل أي مستشعر، يجب التحقق من جهد التشغيل الخاص به ومستوى إشارة الخرج ومتطلبات التيار والمنافذ المتاحة على لوحة Arduino، بالإضافة إلى التأكد من عدم وجود تعارض مع المؤقتات أو الوحدات الطرفية التي تستخدمها مكتبة Braccio.

يمكن أيضًا تثبيت كاميرا أو مستشعر صغير أو ملحق خفيف الوزن في موضع مناسب من الذراع، إذا كان التكوين الميكانيكي يسمح بذلك. ويجب عندها مراعاة الكتلة الإجمالية للملحق والمسافة بينه وبين المفصل الداعم وعزم الدوران المطلوب لتشغيله، بالإضافة إلى أمان التثبيت وتنظيم الكابلات.

يجب عدم تجاوز حدود الحمولة المحددة من الشركة المصنعة تحت أي ظرف من ظروف التشغيل.

14. استكشاف الأخطاء وإصلاحها

يساعد فهم المشكلات الشائعة على ضمان التشغيل الموثوق للذراع الروبوتية، ويقلل من احتمالية حدوث أعطال أو تلف غير ضروري للمكونات.

استكشاف أخطاء الذراع الروبوتية وإصلاحها

المشكلات الشائعة والحلول
المشكلة السبب المحتمل الحل المقترح
الذراع الروبوتية لا تتحرك عدم وجود مصدر طاقة، أو توصيلات غير صحيحة، أو عدم تنفيذ التهيئة البرمجية افحص مصدر الطاقة وتوصيلات لوحة التوسعة والبرنامج المستخدم
إعادة تشغيل لوحة Arduino عند تحرك المحركات انخفاض جهد مصدر الطاقة أو زيادة التيار المطلوب افحص مصدر الطاقة والتوصيلات، واستخدم طريقة التغذية الكهربائية الموصى بها
أحد محركات السيرفو لا يتحرك موصل غير مثبت جيدًا، أو كابل تالف، أو توصيل غير صحيح للمحرك افحص موصل السيرفو ومنفذ الخرج المخصص له على لوحة التوسعة
صدور صوت طنين من محرك السيرفو وجود عائق ميكانيكي أو حمل زائد افصل الطاقة وافحص المفصل المتأثر
تحرك الذراع في اتجاه غير متوقع تجميع غير صحيح أو أمر حركة غير مناسب تحقق من اتجاه تركيب السيرفو وتعيين المحركات ومعاملات الكود
الماسك لا يُغلق بصورة صحيحة موضع غير صحيح للماسك أو وجود تداخل ميكانيكي افحص تجميع الماسك وتأكد من أن قيمة M6 ضمن نطاق الحركة المسموح
الذراع لا يستطيع رفع الجسم وزن الجسم يتجاوز الحمولة المسموح بها أو أن الذراع ممدود بدرجة كبيرة قلل وزن الجسم أو غيّر وضعية الذراع
الحركة غير مستقرة عدم استقرار مصدر الطاقة أو ارتخاء التوصيلات أو وجود احتكاك ميكانيكي افحص مصدر الطاقة والأسلاك والمفاصل الميكانيكية
ارتفاع درجة حرارة السيرفو حمل زائد أو توقف المحرك لفترة طويلة أو انحشار ميكانيكي افصل الطاقة وابحث عن سبب المشكلة قبل إعادة التشغيل
فحص مصدر الطاقة

إذا تمت إعادة تشغيل لوحة Arduino أو أصبحت حركة محركات السيرفو غير منتظمة، فابدأ بفحص مصدر الطاقة.

تأكد من الأمور التالية:
– أن مصدر الطاقة يوفر خرجًا منظمًا بجهد 5 V DC، وفقًا للمواصفات الموصى بها.
– أن قدرة مصدر الطاقة على توفير التيار مناسبة للذراع الروبوتية.
– أن موصل الطاقة مثبت بالكامل في مكانه.
– أن كابل مصدر الطاقة غير تالف.
– أن جميع التوصيلات الكهربائية محكمة وآمنة.

قد يؤدي انخفاض الجهد عند زيادة الحمل إلى عدم استقرار التشغيل، حتى إذا بدا النظام وكأنه يعمل بصورة طبيعية في حالة عدم الحركة.

فحص الحركة الميكانيكية

إذا أصدر أحد محركات السيرفو صوت طنين، أو واجه صعوبة في الحركة، أو لم يصل إلى الموضع المحدد في البرنامج، فافحص المفصل المرتبط به.

تحقق من الأمور التالية:
– عدم وجود أجزاء ميكانيكية غير محاذية بصورة صحيحة.
– عدم إحكام ربط البراغي بدرجة زائدة.
– عدم وجود أجسام تعيق الحركة.
– عدم انحشار الكابلات بين الأجزاء المتحركة.
– عدم تجاوز الحمولة المسموح بها.
– عدم إرسال أوامر حركة تتجاوز نطاق المفصل المسموح.

لا تترك محرك السيرفو في حالة تشغيل مستمرة إذا كانت حركته معاقة بسبب عائق ميكانيكي.

15. الصيانة

يساعد الفحص المنتظم وإجراء أعمال الصيانة الأساسية على الحفاظ على الذراع الروبوتية في حالة تشغيل جيدة، كما يقلل من احتمالية حدوث مشكلات ميكانيكية أو كهربائية.

فحص وصيانة الذراع الروبوتية

الفحص الميكانيكي

– افحص البراغي والصواميل والوردات وجميع عناصر التثبيت الميكانيكية.
– تأكد من محاذاة المفاصل بصورة صحيحة.
– تحقق من أن الماسك يفتح ويغلق بسلاسة.
– افحص الذراع للتأكد من عدم وجود تشققات أو أجزاء بلاستيكية تالفة.
– أزل الغبار والأوساخ المتراكمة حول المفاصل الميكانيكية.
– تحقق من عدم وجود احتكاك أو مقاومة غير طبيعية أثناء الحركة.

فحص محركات السيرفو والكابلات

– افحص كابلات محركات السيرفو والموصلات للتأكد من عدم وجود تلف.
– تأكد من تثبيت كل محرك سيرفو بإحكام في موضعه.
– تحقق من عدم شد الكابلات أو انضغاطها أو انحشارها بين الأجزاء المتحركة.
– تأكد من بقاء موصلات السيرفو مثبتة جيدًا في منافذ الخرج المخصصة لها على لوحة التوسعة.
– انتبه إلى أي أصوات طنين غير معتادة أو ارتفاع في درجة الحرارة أو حركة غير منتظمة.

فحص توصيلات الطاقة

– تأكد من تثبيت موصل الطاقة بإحكام.
– افحص كابل الطاقة للتأكد من عدم وجود تلف ظاهر.
– تحقق من استمرار مصدر الطاقة في توفير جهد الخرج المنظم الموصى به.
– افحص أسباب إعادة تشغيل وحدة التحكم بصورة غير متوقعة أو عدم استقرار حركة السيرفو قبل مواصلة استخدام الذراع.

16. إرشادات السلامة

تحتوي الذراع الروبوتية T050000 على أجزاء ميكانيكية متحركة ومحركات سيرفو تعمل بالطاقة الكهربائية. ويتطلب تشغيلها بأمان تجميعها بصورة صحيحة، واستخدام مصدر طاقة مناسب، والتحكم في نطاق الحركة بعناية.

إرشادات السلامة عند تشغيل الذراع الروبوتية

السلامة الميكانيكية

– أبقِ أصابعك وملابسك والأجسام غير المثبتة بعيدًا عن المفاصل المتحركة والماسك.
– ضع الذراع الروبوتية على سطح ثابت قبل تشغيلها.
– لا تحاول دفع أي مفصل إلى ما يتجاوز نطاق حركته الميكانيكي.
– تجنب الحركات المفاجئة أو المتكررة التي تسبب إجهادًا ميكانيكيًا غير ضروري.
– تأكد من خلو المساحة المحيطة بالذراع من الأجسام التي قد تعيق حركتها.

السلامة الكهربائية

– استخدم مصدر طاقة منظمًا بجهد 5 V DC وتيار 4 A، وفقًا لتوصيات الشركة المصنعة.
– لا تحاول تشغيل محركات السيرفو الستة جميعها من خلال اتصال USB الخاص بلوحة Arduino أو من منفذ 5 V الموجود عليها.
– تحقق من الجهد والقطبية قبل توصيل مصدر الطاقة.
– افصل الطاقة قبل تغيير توصيلات محركات السيرفو أو فحص الأسلاك الكهربائية.
– لا تشغّل النظام عند وجود كابلات تالفة أو توصيلات كهربائية غير محكمة.

سلامة التشغيل

– لا تتجاوز الحمولة المسموح بها وفقًا لوضعية الذراع المستخدمة.
– اختبر أوامر الحركة الجديدة دون حمل أي جسم قبل تنفيذ عمليات الالتقاط والنقل.
– حافظ على وزن الجسم الذي يمسكه الماسك ضمن الحدود الميكانيكية المسموح بها.
– أوقف التشغيل إذا ارتفعت حرارة أحد محركات السيرفو بصورة غير طبيعية، أو استمر في إصدار صوت طنين، أو لم يتمكن من الوصول إلى الموضع المطلوب.
– لا تترك الذراع تعمل دون مراقبة أثناء الاختبارات الأولية أو عند تجربة تسلسلات حركة جديدة.

17. الأسئلة الشائعة

الأسئلة الشائعة حول الذراع الروبوتية TINKERKIT T050000

ما هي مجموعة TINKERKIT T050000؟

مجموعة TINKERKIT T050000 هي مجموعة ذراع روبوتية متوافقة مع Arduino، وتتضمن ذراعًا ميكانيكية تعمل بستة محركات سيرفو، ولوحة توسعة للتحكم، ومصدر طاقة، والملحقات اللازمة للتجميع. وقد صُممت لتعليم أساسيات الروبوتات والبرمجة.

هل تتضمن مجموعة T050000 لوحة Arduino؟

لا. تتضمن المجموعة لوحة توسعة متوافقة مع Arduino، لكنها لا تتضمن لوحة التحكم نفسها. لذلك يجب شراء لوحة Arduino متوافقة بصورة منفصلة.

كم عدد محركات السيرفو المستخدمة في T050000؟

تستخدم الذراع الروبوتية ستة محركات سيرفو، أربعة منها من طراز SR431 ومحركان من طراز SR311.

ما وظيفة لوحة Arduino R3 Shield؟

تعمل لوحة التوسعة على توصيل محركات السيرفو الستة بوحدة التحكم Arduino. كما توفر منافذ مخصصة لمحركات السيرفو، مما يجعل توصيل الذراع الروبوتية والتحكم فيها أكثر سهولة وتنظيمًا.

ما مصدر الطاقة المطلوب لتشغيل T050000؟

توصي الشركة المصنعة باستخدام مصدر طاقة منظم بجهد 5 V DC وتيار 4 A، يتم توصيله عبر مقبس الطاقة الموجود على لوحة التوسعة. وتشير معلومات المنتج الرسمية إلى أن مصدر الطاقة هذا مرفق مع المجموعة.

هل يمكن تشغيل الذراع الروبوتية مباشرة من منفذ USB الخاص بلوحة Arduino؟

لا ينبغي تشغيل الذراع الروبوتية بالكامل من خلال اتصال USB الخاص بلوحة Arduino. فقد يتجاوز التيار الذي تحتاج إليه محركات السيرفو الستة قدرة التوصيل المعتادة عبر USB. لذلك يجب استخدام مصدر الطاقة الخارجي الموصى به.

كم عدد درجات الحرية في الذراع الروبوتية؟

توفر الذراع الروبوتية ست حركات يتم التحكم فيها بواسطة محركات السيرفو، وهي:
– دوران القاعدة.
– حركة الكتف.
– حركة المرفق.
– الحركة الرأسية للمعصم.
– دوران المعصم.
– حركة الماسك.

ما منافذ Arduino المستخدمة للتحكم في محركات السيرفو الستة؟

يعتمد التعيين القياسي للمنافذ في لوحة Braccio على التوصيلات التالية:

– M1 – D11.
– M2 – D10.
– M3 – D9.
– M4 – D6.
– M5 – D5.
– M6 – D3.
ما أقصى حمولة يمكن أن تحملها T050000؟

توضح مواصفات الشركة المصنعة أن أقصى حمولة تبلغ 150 g عند مسافة تشغيل قدرها 32 cm، ويمكن أن تصل إلى 400 g في وضعية Braccio ذات الامتداد الأدنى. وتعتمد الحمولة المسموح بها على التكوين الميكانيكي للذراع ومسافة الجسم عن القاعدة.

ما الفرق بين محركي السيرفو SR431 وSR311؟

يوفر محرك SR431 عزم دوران أعلى من محرك SR311. وتبلغ قيمة العزم المحددة له 12.2 kg·cm عند جهد 4.8 V و14.5 kg·cm عند جهد 6 V، بينما يوفر محرك SR311 عزمًا يبلغ 3.1 kg·cm عند 4.8 V و3.8 kg·cm عند 6 V.

ما مكتبة Arduino المستخدمة للتحكم في الذراع الروبوتية؟

تُستخدم مكتبة Braccio لتهيئة الذراع الروبوتية والتحكم في حركتها. وتوفر المكتبة دوال مثل:

Braccio.begin()
Braccio.ServoMovement()
هل تستطيع T050000 التقاط الأجسام ونقلها؟

نعم. يمكن للذراع الروبوتية تنفيذ عمليات الالتقاط والنقل الأساسية (Pick-and-Place) من خلال تنسيق حركة المفاصل والماسك. ويجب أن يكون الجسم داخل نطاق عمل الذراع وألا يتجاوز الحمولة المسموح بها وفقًا لوضعية التشغيل المستخدمة.

هل يمكن إضافة مستشعرات إلى الذراع الروبوتية؟

نعم. يمكن دمج مستشعرات إضافية باستخدام منافذ Arduino المتاحة. ولكن يجب مراعاة تعيينات المنافذ المستخدمة بالفعل بواسطة لوحة التوسعة، ومتطلبات الجهد الكهربائي، وأي تعارض محتمل مع المؤقتات أو الوحدات الطرفية الأخرى.

هل يمكن التحكم في الذراع الروبوتية لاسلكيًا؟

نعم. يمكن إضافة وحدة اتصال لاسلكي متوافقة لاستقبال أوامر الحركة. ويجب برمجة وحدة التحكم لمعالجة الأوامر المستقبلة وتحويلها إلى مواضع آمنة لمحركات السيرفو.

ماذا أفعل إذا توقف أحد محركات السيرفو عن الحركة؟

افحص موصل السيرفو والكابل ومنفذ الخرج على لوحة التوسعة ومصدر الطاقة وأمر الحركة المرسل من البرنامج. وتحقق أيضًا من أن الموضع المطلوب يقع ضمن نطاق الحركة المسموح به، وأن المفصل الميكانيكي غير معاق بسبب وجود عائق.

18. الخاتمة

تُعد مجموعة TINKERKIT T050000 Arduino R3 Shield، المعروفة باسم TinkerKit Arm Robotics Kit، منصة عملية لتعلم أساسيات الروبوتات والتحكم في محركات السيرفو والبرمجة المضمنة. وتوفر محركات السيرفو الستة ست حركات يمكن التحكم فيها، مما يسمح للذراع بالدوران ورفع أجزائها وخفضها وضبط وضعية المعصم وتشغيل الماسك.

مجموعة الذراع الروبوتية TINKERKIT T050000

تعمل لوحة التوسعة المتوافقة مع Arduino والمرفقة مع المجموعة على تبسيط التوصيلات الكهربائية، بينما تسهّل مكتبة Braccio التحكم في الذراع باستخدام أكواد Arduino. وتتيح هذه المزايا للمبتدئين والمستخدمين ذوي الخبرة تجربة تسلسلات الحركة والتعامل مع الأجسام ودمج المستشعرات وتنفيذ تطبيقات الأتمتة الأساسية.

لضمان تشغيل الذراع الروبوتية بصورة موثوقة، يجب تجميع هيكلها الميكانيكي بشكل صحيح، واستخدام مصدر الطاقة المنظم الموصى به، وفهم تعيين منافذ محركات السيرفو، والتأكد من بقاء أوامر الحركة ضمن نطاقات المفاصل المسموح بها. ومن المهم أيضًا الالتزام بحدود الحمولة، لأن عزم الدوران المطلوب يزداد كلما ابتعد الحمل عن المفاصل التي تدعمه.

بعد فهم هذه الأساسيات، توفر مجموعة T050000 نقطة انطلاق مفيدة لاستكشاف مفاهيم أكثر تقدمًا في مجال الروبوتات، بما في ذلك عمليات الالتقاط والنقل، والحركيات (Kinematics)، والتحكم عن بُعد، والأتمتة المعتمدة على المستشعرات.

 

 

 

Leave a comment