JBD-HP16SA Lithium Battery Charger Protection Module (BMS) 16S 30A 60V with Cell Balancing
The Lithium Battery Charger Protection Module (BMS) 16S 30A 60V is a compact PCB-mount Battery Management System designed for lithium-ion or lithium-polymer battery packs comprising up to 16 cells in series. It provides essential safety and battery-management functions — including over-charge, over-discharge, over-current, short-circuit, and temperature protection — while also performing passive cell balancing to ensure uniform cell voltages across the pack. Its 30 A continuous discharge rating makes it suitable for medium-power electric bikes, scooters, solar storage systems, portable power packs, and DIY lithium battery builds.
Features
- Supports up to 16 cells in series (16S) — suitable for nominal 60 V battery packs (full-charge up to ~67.2 V for Li-ion cells).
- Continuous discharge rating typically 30 A.
- Passive cell-balancing circuit to equalize cell voltages — extends pack life and improves safety.
- Full protection suite: over-charge cutoff, over-discharge cutoff, over-current protection, short-circuit protection.
- Balance-lead harness included for all 16 cells.
- Compact PCB layout, suitable for DIY battery pack builds, scooter/ebike batteries, solar backup packs, and high-voltage battery systems.
- Compatible with common lithium-ion chemistries (18650/21700 prismatic or cylindrical cells), lithium-polymer (Li-Po), and LiFePO₄.
PINOUT
Specifications
| Parameter | Value / Range |
|---|---|
| Series Configuration | 16S (16 cells in series) |
| Nominal Pack Voltage | ~60 V (3.7 V nominal per cell × 16) |
| Full Charge Voltage (Li-ion) | ~67.2 V (4.2 V × 16) — ensure charger matches spec |
| Continuous Discharge Current | 30 A |
| Protection Functions | Over-charge, Over-discharge, Over-current, Short-circuit, Cell balancing |
| Balance Method | Passive (resistor balancing), via multi-wire balance harness |
| Cell Types Supported | Lithium-ion, Li-Po, LiFePO₄ (depending on charge/discharge voltage settings) |
| Typical Use Cases | Electric bikes & scooters, power-walls, DIY battery packs, portable energy systems, solar storage, high-voltage tool packs |
Applications
- Battery packs for 60V electric bicycles, scooters, small EVs, and mobility devices.
- Portable battery storage or backup power banks for off-grid and solar applications.
- DIY battery systems using 16-cell lithium banks (e.g. tool packs, marine batteries, portable energy systems).
- Replacement or upgrade BMS board for existing 16S battery packs requiring balancing and safety features.
- Medium-power discharge applications (motors, inverters, lighting systems, etc.).
Package Contents
- 1x JBD-HP16SA Lithium Battery Charger Protection Module (BMS) 16S 30A 60V with Cell Balancing.
- 1x 17-pin connector with 30cm lead wires.
