MECHANIC UV Curable Solder Mask 10ml
The MECHANIC UV Curable Solder Mask 10ml is a protective coating intended for printed circuit board repair, rework, and restoration. It is applied over exposed PCB areas where the original solder mask has been removed or damaged, helping restore an insulating protective layer over copper traces. Its syringe-style packaging allows the material to be applied to localized areas during electronic repair work, making it particularly useful when working on small PCB sections and repaired circuit traces.
During PCB servicing, exposed copper can remain unprotected after scraping, trace repair, jumper installation, or component rework. The MECHANIC UV solder mask can be applied over these repaired areas to cover the exposed conductive surface and provide additional insulation. Once properly applied, the coating helps protect PCB traces against moisture, corrosion, accidental electrical contact, and contamination that may affect repaired circuit areas.
Features:
- UV-curable PCB protective coating.
- Helps insulate exposed PCB traces.
- Helps protect repaired areas from moisture and corrosion.
- Suitable for localized PCB trace repairs.
- Useful after PCB soldering and rework.
- Helps cover exposed conductive areas.
- Suitable for PCB repair and restoration.
- Syringe-style container for controlled application.
- Can be used for small and detailed PCB repair areas.
- Available in multiple color variants.
Specifications:
| Specification | Value |
|---|---|
| Brand: | MECHANIC |
| Product Type: | UV Curable Solder Mask |
| Material Form: | Viscous Liquid / Solder Mask Ink |
| Capacity: | 10ml / 10cc |
| Curing Method: | UV Light |
| Container Type: | Syringe |
| Available Standard Colors: | Green, Red, Yellow, Black, Blue |
| Additional Variants: | 3S New Green, 3S New Blue, 3S New Black |
| Primary Use: | PCB Protection and Repair |
| Compatible Surface: | Printed Circuit Boards (PCB) |
| Application Method: | Direct / Manual Application |
| Cured Function: | Protective and Insulating PCB Coating |
Usage:
- Apply paint on your PCB.
- Spread it on the PCB by covering the transparent mask film.
- Expose it under UV light ( or sun ) for a few minutes.
- Wash away the extra paint with gasoline or oil-based solvent.
Applications:
- PCB Trace Repair.
- PCB Solder Mask Restoration.
- Exposed Copper Protection.
- PCB Rework Protection.
- Jumper Wire Protection.
- PCB Prototyping.
- Mobile Phone Motherboard Repair.
- General Electronics PCB Maintenance.
Package Contents:
- 1× MECHANIC UV Curable Solder Mask 10ml ( Depending on the Color and 3S New Variants )
