The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. This containing one p-channel high side MOSFET and one n-channel low side MOSFET; with an integrated driver IC in one package. Due to the p-channel high side switch; the need for a charge pump is eliminated thus minimizing EMI.Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs; diagnosis with current sense, slew rate adjustment; dead time generation and protection against overtemperature, overvoltage, under voltage; overcurrent, and short circuit.
The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module provides; a cost-optimized solution for protected high current PWM motor drives with very low board space consumption.
Features:
- Double BTS7960 large current (43 A) H bridge driver.
- 5V isolate with MCU, and effectively protect MCU.
- 5V power indicator on board.
- Input supply voltage 5.5V to 27V.
- Voltage indication of motor driver output end.
- Built in heat sink.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2).
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ.
- Two heat flow passing through an error signal output.
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply.
- Length: 50mm
- Height: 43mm
- Width: 50mm
Applications:
- DC motor driver
- 4WD high-power mobile robot platform
- Combat robots
- Pumps
- Electric fans
- Conveyors
Input port:
- RPWM: forward level or PWM signal input, active high.
- LPWM: Reverse level or PWM signal input, active high.
- R_EN: forward drive enable input, high-level enable, low level off.
- L_EN: Reverse drive enable input, high-level enable, low level off.
- R_IS: forward drive current alarm output.
- L_IS: Reverse drive current alarm output.
- VCC: +5 V power output, 5V power supply connection with the microcontroller.
- GND: signal common low end.
Reviews
There are no reviews yet.