Adjustable, digital distance sensor with a cable length of 40 cm and nuts to facilitate mounting. Measuring range from 5 to 80 cm, is configured using a knob. Voltage supply 5 V.
Description of Adjustable digital distance sensor E18-D80NK 5-80cm
Adjustable, digital distance sensor with a cable length of 40 cm and nuts to facilitate mounting. Measuring range from 5 to 80 cm, is set using the knob located at the rearpart ofthe device – counterclockwise rotatingdecreases the range.
Object detection is indicated through the occurrence of a low state at the output (black wire) and the switching on of the red led. The advantage of the sensor is also protection against reverse power connection.
Connection
- Wire- brown– supply voltage – 5V
- Wire- blue– GND
- Wire- black– digital output – OUT
- there is no object – high state
- the object detection – low state
| The product is compatible with Arduino For proper operation, it is sufficient to connect power of 5 Volts and the sensor’s output to any digital lead of Arduino. Reading works by causing a standard function digital Read(lead_number). |
Specification of adjustable digital distance sensor
- Supply voltage: 5 V
- Consumption of current: below 100 mA
- The measuring range is adjustable: from 5 to 80 cm
- Knob of range’s regulation – rotary potentiometer
- Output signal: digital (low state in the case of object detection, otherwise high)
- The led indicating the detection of the object
- Response time: below 2 MS
- Protection against reverse polarity
- Operating temperature: -25 °C to +55 °C
- Diameter: 18 mm
- Sensor length: 50 mm
Reviews
There are no reviews yet.