PIC16F630 8-Bit FLASH CMOS Microcontroller 2.0–5.5V 8.5µA PDIP-14
PIC16F630 8-bit FLASH microcontroller with 2.0–5.5V operation, 12 I/O pins, 64B RAM, 128B EEPROM, timers, comparator and ICSP.
125.00 EGP
Buy NowPIC16F630 8-Bit FLASH CMOS Microcontroller 2.0–5.5V 8.5µA PDIP-14
The PIC16F630 is a 14-pin FLASH-based 8-bit CMOS microcontroller from Microchip, featuring a RISC CPU with 35 instructions, operation up to 20MHz oscillator/clock input, 12 general-purpose I/O pins, FLASH program memory, SRAM, EEPROM data memory, an analog comparator with programmable voltage reference, Timer0 and Timer1, interrupt capability, multiple oscillator options, SLEEP mode, Watchdog Timer, Brown-out Detect, and In-Circuit Serial Programming (ICSP).
Features
- 8-bit RISC CPU architecture
- Only 35 instructions
- Single-cycle instructions except branches
- Up to 20MHz oscillator/clock input
- 200ns instruction cycle
- 8-level deep hardware stack
- Direct, indirect and relative addressing
- 1K x 14 words FLASH program memory
- 64 bytes SRAM
- 128 bytes EEPROM
- 12 general-purpose I/O pins
- Individual I/O direction control
- High-current sink/source capability for direct LED drive
- Analog comparator module
- Programmable on-chip comparator voltage reference (CVREF)
- Timer0 8-bit timer/counter with programmable prescaler
- Enhanced Timer1 16-bit timer/counter with prescaler
- Internal and external oscillator options
- Precision internal 4MHz oscillator calibrated to ±1%
- SLEEP power-saving mode
- Power-on Reset (POR)
- Power-up Timer (PWRT)
- Oscillator Start-up Timer (OST)
- Brown-out Detect (BOD)
- Watchdog Timer with independent oscillator
- Interrupt-on-pin-change
- Individual programmable weak pull-ups
- Programmable code protection
- In-Circuit Serial Programming via two pins
- FLASH endurance: 100,000 write cycles
- EEPROM endurance: 1,000,000 write cycles
- FLASH/Data EEPROM retention: greater than 40 years
- Industrial and Extended temperature options
Specifications
| Manufacturer | Microchip Technology |
| Part Number | PIC16F630 |
| Device Type | 8-Bit FLASH-Based CMOS Microcontroller |
| CPU Architecture | High Performance RISC CPU |
| Instruction Set | 35 instructions |
| Maximum Oscillator / Clock Input | 20 MHz |
| Instruction Cycle | 200 ns |
| Operating Voltage | 2.0 V to 5.5 V |
| Typical Operating Current | 8.5 µA @ 32 kHz, 2.0 V |
| Typical Operating Current | 100 µA @ 1 MHz, 2.0 V |
| Typical Standby Current | 1 nA @ 2.0 V |
| Watchdog Timer Current | 300 nA @ 2.0 V, typical |
| Program Memory | 1024 x 14 words FLASH |
| Data RAM | 64 bytes |
| Data EEPROM | 128 bytes |
| I/O Pins | 12 |
| Analog Comparator | 1 comparator with programmable on-chip comparator voltage reference |
| Timer0 | 8-bit timer/counter with 8-bit programmable prescaler |
| Timer1 | 16-bit timer/counter with prescaler and external gate input mode |
| Oscillator Options | Internal and external oscillator options |
| Internal Oscillator | 4 MHz precision internal oscillator, factory calibrated to ±1% |
| Reset / Protection | POR, PWRT, OST, Brown-out Detect and Watchdog Timer |
| Interrupt Features | Interrupt capability and interrupt-on-pin-change |
| Programming | In-Circuit Serial Programming (ICSP) via two pins |
| FLASH Endurance | 100,000 write cycles |
| EEPROM Endurance | 1,000,000 write cycles |
| Data Retention | Greater than 40 years for FLASH/Data EEPROM |
| Operating Temperature | -40°C to +85°C (Industrial); -40°C to +125°C (Extended) |
Applications
- Embedded control designs requiring an 8-bit microcontroller
- Designs using multiple general-purpose digital I/O pins
- Timer and counter-based control
- Comparator-based signal monitoring
- Low-power battery-oriented designs using SLEEP mode
- Designs requiring non-volatile FLASH and EEPROM memory
- Systems requiring ICSP in-circuit programming
- LED drive and other applications using the device’s high-current I/O capability
Package Content
- 1 x PIC16F630 8-Bit FLASH CMOS Microcontroller 2.0–5.5V 8.5µA PDIP-14
DataSheet
Related products
