Solder Wick CP-2015 (W 2.0mm, L 1.5m)

• Model: CP-2015
• Material: Metal
• Color: Coppery
• Type: Hand tools

Features:

Copper alloy precision woven, 2.0mm Width, 1.5m Length, Eco-friendly, High absorption Rate

Function: 

Desoldering wonders and thoroughly, for precision circuits

How to use:

1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut off the used section of the wick.
4. Repeat steps 1, 2, 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder.

Caution:

Do not force the tip against the desoldering wick to avoid injury to yourself or damage to the parts and PCB

Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB