FOR LEAD-FREE DESOLDERING
Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load.
SPECIFICATIONS
| MODEL | Width | Length |
| CP-3015 | Approx. 3.0mm | Approx. 1.5m |
High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux.
●Can be used for precision PCBs safely.
- High-quality cable with braided copper wire.
- The cable is saturated with special chlorine and quickly removes unwanted solder when using a soldering iron.
- When suctioning, only touch the soldering iron and packaging.
- Otherwise there is a risk of burns.
Application:
- Place the cable on the solder you want to remove and then push the heated tip of the soldering iron on the cable
- After absorbing the solder Remove the cable
- Cut the used part of the cable with pliers
- Thin and soft wire has efficient heat transfer
- Removes solder quickly and with good thermal response.
Reviews
There are no reviews yet.