Makers Electronics sells DC motors and gear motors, servo motors, stepper motors, motor drivers, pumps and robot wheels in Alexandria, with delivery across Egypt. All prices are in EGP, and the live price and stock are on each product page.
DC motors and gear motors in stock
Servo motors
Stepper motors
Motor drivers
Wheels and pumps
More: browse all motors, drivers and wheels, DC motors, servo motors, stepper motors and motor drivers.
Which motor do you need?
| Motor | How it works | Needs | Good for |
|---|---|---|---|
| DC motor / gear motor | Spins when you apply voltage. A gearbox lowers the speed and raises the torque. | A driver (H-bridge) for direction and speed control with PWM | Robot wheels, fans, pumps and simple moving parts |
| Hobby servo (SG90 and similar) | Moves its shaft to an angle that you set with a control pulse | 5 V supply and one signal wire; no driver | Arms, grippers, steering and pan-tilt mounts |
| Continuous-rotation servo | A servo modified to spin continuously: the pulse sets speed and direction, not an angle | 5 V supply and one signal wire | Small robot wheels with simple control |
| Stepper motor | Turns in fixed steps, so the position is known without feedback | A stepper driver and a supply rated for the motor current | Positioning, 3D printers, CNC and camera sliders |
| Brushless motor | Electronic commutation instead of brushes; efficient and long-lasting | An ESC (speed controller) | Drones, fans and high-speed uses |
Quick rules
- Never power a motor from a microcontroller pin. Use a driver module and a separate supply that matches the motor voltage and current.
- Connect the grounds of the driver supply and the microcontroller together.
- Motors cause voltage spikes and electrical noise: add a capacitor across a small DC motor and use the protection diodes that a driver board provides.
- Pick the driver by current: it should be rated for more than the motor draws under load, not only when it spins freely.
- A servo can draw a lot of current when it moves under load. Power it from a supply that can deliver it, not from the board 5 V pin when the load is heavy.
- A stepper driver has a current setting: set it to the current rating of your stepper motor.
Guides
- DC motor: connections, control and programming
- Servo motor: connections, control and programming
- Stepper motor: connections, control and programming
- Brushed vs brushless motors
- Stepper motors basics: types, uses and working principles
- Introducing Cytron motor drivers
Powering the motors from a battery? See batteries and chargers in Egypt and DC-DC converters and power supplies.
Frequently asked questions
Do I need a driver for a servo motor?
No. A hobby servo has its own control electronics: it needs a 5 V supply and one signal wire from the board. A DC motor or a stepper motor does need a driver.
What is the difference between a servo and a stepper motor?
A servo moves to an angle you set and holds it, usually within a limited range. A stepper turns in fixed steps and can rotate without limit, and is used when you need accurate positioning over many turns.
Do you deliver motors and drivers across Egypt?
Yes. Orders to Alexandria placed before 2:00 PM are usually delivered the same day, and orders to other governorates are usually delivered the next day. These are typical times, not a guarantee. Shipping cost depends on the governorate and is shown at checkout. See Shipping and Delivery.
Can I return motors and drivers?
Electronic products cannot be returned or exchanged once opened or used, except for confirmed manufacturing defects. Defects must be reported within 3 days of delivery. Full rules: Refund and Returns Policy.
Do you sell motors and drivers in bulk to schools, universities or companies?
Yes. Contact customer service on +2 0248813824, WhatsApp +20 121 198 1188 or info@makerselectronics.com and you will be connected to the corporate customers team.
Can I visit the store?
Yes: 158 Elhorya St., Elibrahymia, Alexandria, Egypt. Saturday to Thursday 10:00 AM to 8:30 PM, Friday 2:00 PM to 8:00 PM.