1 This is isolated touch sensor switch switch, applicable to all kinds of lamps on medium (such as glass, acrylic, plastic, ceramic, etc.)
2 High safety performance, long lifespan, beautiful and generous, it is the first choice of making the highest grade products
3 Can guarantee clients safe, effectively preventDefault interference from outside world and outside world.
Specifications:
Working voltage: 6-12V DC
Load Power: ≤36W
Size: 4.7 x 3.2 x 1.5cm / 1.85 x 1.26 x 0.59 ” (LxWx)
Connection wires:
Red and black wire connecting +/- from 6-12VDC A
red and yellow wire connects the lamp; a
black touch contact will install the back of the mirror.
Installation procedure:
Note: Before installation, please cut off the main power.
1, to set the touch point on the mirror, the diameter of the touch point should be 9-10mm, first, the mercury should be removed from the mirror around the contact point, for the size of the removable mercury should be 1.5-2mm.
2, to make the reticle in the middle of the touch point, there are three arrow lines on the cover of the switch, when installed, three arrow lines must be allen, i.e. three lines of the reticle, it can touch to control if after the allen direction, now remove the paster from the touch board, then it can Install the touch switch on the mirror, then you can fix it by using other things in the system to avoid from dropping.
