Wood
This is a PLA based 3D printing material with cool appearance like wood. It was the characteristics of easy to print and smooth surface as PLA.It tilize active foaming technology to achieve like-wood appearance with low-density PLA of 0.7g/cm3.
Description
This is a PLA based 3D printing material with cool appearance like wood. It was the characteristics of easy to print and smooth surface as PLA.It tilize active foaming technology to achieve like-wood appearance with low-density PLA of 0.7g/cm3.
Sellingpoint
Cool appearance like wood.
Low-density PLA of 0.7g/cm3.
Easy to paint.
Easy to print as PLA.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | Wood |
| Density(g/cm3) | 0.7 |
| Heat Distortion Temp(℃,0.45MPa) | 45 |
| Melt Flow Index(g/10min) | 17(190℃/2.16kg) |
| Tensile Strength(MPa) | / |
| Elongation at Break(%) | / |
| Flexural Strength(MPa) | / |
| Flexural Modulus(MPa) | / |
| IZOD Impact Strength(kJ/㎡) | / |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 210 – 230℃ Recommended temperature：210℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
| Print recommend | Pay attention to turn off the speed reduction function on the software |
|---|
