Sold out
HANDSKIT NO.836 Electric Desoldering Pump 36W
The HANDSKIT NO.836 (36W) is a 2-in-1 electric iron and vacuum Desoldering Pump that quickly melts and suctions away solder for efficient PCB repairs.
295.00 EGP
HANDSKIT NO.836 Electric Desoldering Pump 36W
The HANDSKIT NO.836 Electric Desoldering Pump 36W is a practical 2-in-1 desoldering tool designed to simplify electronic repair and maintenance. By integrating a heating element with a built-in vacuum pump, it melts solder and immediately removes it from through-hole solder joints using a single hand-operated tool. This design greatly improves efficiency compared to traditional manual desoldering pumps and is ideal for PCB repair, component replacement, and rework applications.
Features:
- 2-in-1 soldering iron and desoldering-pump.
- 36W ceramic heating element.
- Built-in vacuum suction mechanism.
- One-handed operation.
- Fast heat-up in approximately 3 to 5 minutes.
- Strong suction for efficient solder removal.
- Heat-resistant insulated handle.
Specifications:
| Parameter | Value |
|---|---|
| Brand | HANDSKIT |
| Model | NO.836 |
| Product Type | Electric Desoldering Pump |
| Power | 36W |
| Rated Voltage | 220VAC |
| Rated Frequency | 50Hz |
| Heating Time | 3~5min |
| Function | Solder Melting & Vacuum Suction |
| Maximum Suction | 5cm-Hg |
| Heating Element | Electric Heater |
| Nozzle Material | Metal |
| Body Material | Nylon, Stainless Steel, Copper |
| Handle Type | Heat Resistant |
| Operation | One-Handed |
| Cable Length | 1.1m |
| Plug Type | EU Plug |
Configuration:
Applications:
- PCB repair.
- Electronic component removal.
- Through-hole desoldering.
- IC replacement.
- Capacitor replacement.
- Resistor replacement.
- Connector repair.
- Electronics maintenance.
- DIY electronics projects.
- Educational laboratories.
- Service centers.
- Prototype rework.
Package Include:
- 1x HANDSKIT NO.836 Electric Desoldering-Pump 36W.
- 1x Nozzle Cleaning Needle.
Notes:
- The suction mechanism is manually operated using the spring-loaded plunger; electricity is used for heating only.
- Allow the metal nozzle to heat before attempting to remove solder.
- Do not touch the metal barrel or nozzle during or immediately after use.
- Disconnect the tool from power and allow it to cool completely before cleaning or maintenance.
- Do not use on energized circuits.
- Use in a well-ventilated area and avoid inhaling soldering fumes.
- Clean the nozzle and solder chamber regularly to maintain suction performance.