IR2110 High Side and Low Side Gate Driver IC DIP-14

IR2110 High Side and Low Side Gate Driver IC DIP-14

The IR2110 High Side and Low Side Gate Driver IC DIP-14 is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. Operating supply voltage range for IR2110 is 10 to 20 volt and output current is 2.5A.  IR2110 comes in 14 pin through-hole PDIP package.

Introduction to IR2110 MOSFET Driver:

In many applications MOSFETs configured as high-side switches and many times it is configured as high-side and low-side switch. In such applications high-low side MOSFET drivers are used. IR2110 is the most popular high and low side driver IC. Logic inputs of this IC are compatible with standard CMOS or LSTTL outputs. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The maximum output current for this IC is 2.5A and supply current is 340µA. Operating voltage range for this IC is 10V to 20V.

Features:

• High voltage floating channel up to 500V.
• Gate drive supply range: 10V to 20V.
• Independent high and low side outputs.
• Compatible with both MOSFETs and IGBTs.
• Under-voltage lockout for both channels.
• 3.3V, 5V, and 15V logic input compatibility.
• High noise immunity.
• Cross-conduction prevention logic (dead-time).
• Output in phase with input.
• Matched propagation delay for both channels.
• DIP-14 through-hole package for easy prototyping.

Pin Configuration:

Specifications:

• Output Current: 2.5A
• Supply Voltage Range: 10V to 20V
• Maximum Turn-On Delay Time: 120 ns
• Maximum Turn-Off Delay Time: 94 ns
• Operating Supply Current: 340 µA
• Rise Time: 35 ns
• Fall Time: 25 ns
• Package: PDIP

Note:

• Complete Technical Details can be found at the IR2110 Driver given at the end of this page.

How to use IR2110:

• Application circuit for driving MOSFETs in both high and low side configurations using IR2110 is given below.
• The floating channel used to drive the N-channel power MOSFET or IGBT in the high side configuration that operates up to 500 volts.
• HO and LO are Low side gate drive output and High side gate driving output pins.

Applications:

• Full and half-bridge motor driver.
• Industrial controls.
• White goods.