Description
Minicomputer with Windows 10 installed! Equipped with a processor Intel Cherry Trail Z8350 Quad Core 1.8 GHz. In addition, it has 2 GB of RAM and 32 GB of built-in memory EMMC, wi-fi and Bluetooth 4.0, 2x USB 2.0, 1x USB 3.0, a microSD slot, and an Ethernet port. In addition, Panda features microcontrollerATmega32u4 known from Arduino Leonardo, which controls 20 GPIOs. This combination allows the direct programming of the embedded Leonardo of Windows 10 via the serial interface.
| LattePanda has installed the operating system Windows 10! |
What does it take to run LattePanda?
- MicroUSB power supply – with a minimum load current of 2 A.
- HDMI cable- to connect the device to the monitor.
- Mouse and keyboard – to control and input data into the device.
First run
Starting LattePanda is very easy, to enjoy the OS from desktop Windows 10 you have to:
- Connect the power adapter with a micro USB connector with performance above 2 A.
- The LED located under the device should illuminate red.
- Then just press and hold the Power button (the first one next to the Ethernet slot) for approx. 1 sec.
- The minicomputer will start, showing on the screen the logo LattePanda.
- Now, you just have to configure Windows 10 in the same way as, for example, after buying a new laptop.
LattePanda also has connectors for modules and sensors from the Gravity series.
Operating system
The disk of LattePanda is embedded memory EMMC. Windows 10’s operating system is already installed by the manufacturer. Just run the minicomputer and configure Windows to your liking.
The picture and sound
LattePanda has a HDMI port through which you can send pictures and sound.
Power
As a power source, the system uses a micro USB connector. The manufacturer recommends that the voltage have values of 5 V and the minimum current must be not less than 2.0 A.
Minicomputer LattePanda – top view.
Communication
LattePanda has basic communication interfaces that can be found in office computers of PC class. In addition to the previously listed connectors for audio and video, the user has at his or her disposal:
- three connectors: USB 2x USB 2.0 + 1x USB 3.0 to which you can connect, for example, a mouse, keyboard, or USB flash drive. If you find that the slots are too short, you can increase their number using an external USB HUB.
- Ethernet slot, that is the ability to directly connect to the LOCAL network
- the wi-fi module allows communication with wireless network 802.11 b g n
- Bluetooth 4.0– allows data transmission through the interface
- GPIO– outputs/inputs with general purpose that can be used to control the LEDs, buttons, and drivers of engines. 20 pins are navigated through the coprocessor Atmega32u4 known from board Arduino Leonardo.
Distribution of connectors for minicomputer LattePanda.
Compatible with Arduino
Minicomputer has an additional microcontroller Atmega32u4 – known from board Arduino Leonardo. This system operates 20 digital I/O and interfaces designed to communicate with modules and sensors like UART, I2C, and SPI. In addition, the manufacturer installed several connectors for modules of the Gravity series.
Specifications
| Basic information | |
| Model | LattePanda 2GB |
| Technical specification | |
| Processor chipset | Intel Cherry Trail Z8350 |
| The number of cores | 4 (Quad Core) |
| Operating systems | Windows10 with license |
| Clock frequency | 1.8 GHz |
| RAM | 2 GB DDR3L |
| Memory | 32GB EMMC (built-in) |
| Coprocessor | Atmega32u4 in accordance with Arduino Leonardo supports GPIO |
| Graphics | Intel HD Graphics
200 MHz (500 MHz) 1920x1080px |
| GPIO slot |
|
| The number of GPIO | 20 – Atmega32u4
2 – Intel |
| Power | 5.0 V / 2.0 A
via micro USB |
| Tile sizes | 88 x 70 mm |
| Interfaces | |
| USB interface | 2x USB 2.0 – type A
1x USB 3.0 – type A |
| Network interface | Ethernet port
10/100 Mbps |
| The Wi-Fi Interface | 802.11 b/g/n 150 Mbps |
| Bluetooth | Low Energy, BLE 4.0 |
| Camera | – |
| Touch display | special slot |
| Video | HDMI HD 1080p
30 fps |
| Audio | HDMI + audio Jack |
| Communication | UART, SPI, I2C, GPIO |
APPLICATIONS
- Data Research
- Work as a Regular PC
- A Powerful Brain for Robot
- Security Monitoring with Facial Recognition
PROJECTS
Project 1. LattePanda Project: Water Cooling LattePandaIntroduction: Rasim Muratovic is a YouTube reviewer. He used the water to cool the Latte Panda. We’d like to share this interesting project with all of you.
.png)
Project 2. LattePanda Project: Send light sensor data to Azure storageIntroduction: This sample shows how to send data from a light sensor to Azure storage using a Node.JS app.
Project 3. LattePanda Project: C# Arduino GUI to control the LEDIntroduction: This tutorial will tell you how to make the simplest GUI to control your Arduino. Basically, this post is about communication between C# and Arduino
Project 4. MicroDot for LattePanda (or Raspberry Pi)Introduction: The MicroDot is a homemade Alexa ‘button’ designed to be connected to a LattePanda or a Raspberry Pi, with Alexa Sample App installed.
Useful links |
Included
- Minicomputer LattePanda
- External wi-fi antenna
Reviews
There are no reviews yet.